确定大气颗粒物平均滞留时间的新方法

从低层大气的基本属性出发,利用大气颗粒物中放射性核素的衰变特性与转移速率等相关信息, 建立了单位体积大气颗粒物中被吸附的放射性粒子数、衰变粒子数和转移粒子数的数学模型, 获得了确定低层大气颗粒物平均滞留时间的新方法.该方法解决了当前相关研究中出现的困惑, 说明了大气具有有限的自净功能,给出了大气颗粒物中同一衰变链上各核素达到活度平衡的条件 及降低平均滞留时间的途径,为大气环境的监测与治理提供了科学依据. 关键词： 大气颗粒物 平均滞留时间 氡子体 监测     

Gd2(WO4)3: Eu纳米发光材料中黄昆因子和能量传递速率的实验获得

采用共沉淀法制备了不同Eu³⁺掺杂浓度的Gd₂(WO₄)₃纳米发光材料. 测量了纳米材料样品的X射线衍射谱(XRD) 和场发射扫描电镜, 对样品的结构和形貌进行了表征. 测量了各样品的发射光谱和激发光谱(声子边带光谱), 绘制了浓度猝灭曲线, 确定了最佳的掺杂浓度为20 mol%. 通过声子边带光谱计算了不同掺杂浓度样品的黄昆因子. 测量了不同浓度样品的荧光寿命, 利用Auzel模型对Eu^{3+ 5}D₀能级荧光寿命数据进行了拟合, 确定了⁵D₀能级的固有寿命和猝灭过程中生成的声子数. 本文还根据荧光寿命数据计算了Eu³⁺之间的能量传递速率, 确定了能量传递速率与浓度的关系. 关键词： 钨酸盐 3+')" href="#">Eu³⁺ 黄昆因子 能量传递速率     

基于新型分子距边矢量ν与多元统计方法对于烷烃13C NMR化学位移和(CSS)估计与预测的深入研究

基于本实验室提出一种新型以势能形式表达的分子距边矢量, 深入地系统研究了核磁共振碳-13谱化学位移和(CSS)规律以及分子拓扑指数矢量在定量结构波谱关系(QSSR)中的应用. 借助多种计量化学方法包括多元线性回归、逐步多元回归、主成分回归、主筛选回归等进行分子拟模和定量相关研究, 发现烷烃¹³C NMR 化学位移和(CSS)与其分子距边矢量及路径长度指数有良好线性相关性, 回归方程及其统计参数为:CSS=bν+cp₃=∑_^mj=0b_jν_j+b₁₁p₃=b₀ν+b₁ν₁+b₂ν₂+b₃ν₃+b₄ν₄+b₅ν₅+b₆ν₆+b₇ν₇+b₈ν₈+b₉ν₉+b₁₀ν₁₀+b₁₁p₃=-13.576+22.179ν₁+28.407ν₂+25 .950ν₃+26.690ν₄+14.498ν₅+5.726ν₆-5.379ν₇-3.214ν₈-15.021ν₉ -25.710ν₁₀+12.278p₃ n=63, R=0.997, EV=99.68%, RMS=3.7348, SD=4.1 18, F= 773.116, U=144228.844, Q=864.938; CV: R²_CV=0.980, EV=98.83%, RMS=7.126 1, SD_CV=7.634, F_CV=221.720, U_CV=142121.891, Q_CV=2971 .896.结果良好.     

应用键轨道连接矩阵方法预测烷烃折光率.

应用键轨道连接矩阵方法提取结构参数PX1CC和PX1CH， 并用于建立预测烷烃折光率的QSPR模型．该模型不仅预测精度较高(其误差仅为0.0048)，而且模型中采用的参数表达了直接与分子的折光能力相关的结构信息(即烷烃分子中电子被极化的能力)．此参数提取简单，既具备拓扑指数简单、易算，物理意义明确．     

Solid-phase Synthesis of-Haloaldehydes from Polymer-supported 4-(Phenylseleno)morpholine

Polymer-supported reagents for organic synthesis are enjoying a renewed popularity with the emergence of combinatorial chemistry in recent years1. 4-(Arylseleno)morpholines formed in situ are useful -seleno-introducing reagents for saturated aldehydes2. -Sele- noaldehydes, as a frequently used intermediates, can be converted into -haloaldehydes by halogenating reaction3. However, organic selenium reagents always have a foul smell and are quite toxic, which is often problematic in organic sy…     

Polystyrene-supported Benzyl Selenide: An Efficient Reagent for Highly Stereocontrolled Synthesis of Substituted Olefins

Solid-phase methodology has been rapidly and extensively applied to the preparation of small organic molecules recently1. It might be argued that selenoxide syn-elimination provided the principal impetus for the development of organoselenium chemistry. In addition, the required selenoxides are readily available from the oxidation of the corresponding selenides, which in turn can be prepared by the reaction of selenium-stabilized carbanions with various electrophilic substrates2. However, or…     

Thermal decomposition kinetics of titanium hydride and Al alloy melt foaming process

Metal foams, now one of research foci, are a newclass of materials with low densities and novel physi-cal, mechanical, thermal, electrical and acoustic prop-erties[1—8]. Demands from high-tech make Al alloyfoam, which has much higher specific strength than ofpure Al foam, the new development focus[9—11]. Melt foaming process is one of the approaches tofabricate Al foam and Al alloy foam and their porestructure (pore diameter and porosity) has close rela-tionship with the thermal decompo…     

醇在α-A12O3和硅胶G表面上的脱附规律

吸附质在两相界面上的吸附行为对多相催化、界面化学等有重要意义[1,2]。本文采用程序升温法分别测定了13种醇在α Al2O3和硅胶G表面上的脱附温度td,发现td与醇的沸点及烷基化效应指数[3](PEI)有定量关系。1　实验红外干燥箱100℃干燥30分钟后的吸附剂在所研究的吸附质的饱和蒸汽压、室温下平衡24-48h,以达到吸附平衡;取20-25mg吸附平衡后的吸附剂,用PCT 1A型差热天平进行TG/DTA分析,升温速率为2 5℃/min,升温范围从室温到250℃,由计算机进行数据采集(RSZ 200热分析系统软件),从DTA曲线的最高峰值确定脱附温度,每个样品重复3-5…     

烷烃电离能和生成焓的相关性

根据化合物形成过程中价电子能量变化与生成焓之间的关系, 推导出烷烃的生成焓和电离能之间的关系. 以21个烷烃化合物为模型将实验测定的电离能与标准生成焓进行直接关联, 证实了模型方程的适用性, 所得回归方程的相关系数达到0.9999, 估算值与实验值之间的标准偏差仅为0.03 eV. 同时还利用实验测定的标准生成焓对一系列烷烃的电离能作了预测.     

Studies on the Total Synthesis of Hainanolide (VII) - Analysis of the Relative Stereochemistry of key Intermediate 2

The natural product, hainanolide 1, also under the name harringtonolide2 demonstrated antitumor and antiviral activities in preliminary test. Its structure was determined by X-ray diffraction. The total synthesis of 1 was reported recently by Mander3. A different scheme of its synthesis has been studied in our laboratory4. Here the determination of the stereochemical structure of the key intermediate 2 in the synthesis was reported. HMBC and HMQC spectra identified the skeleton and H,…