DIFFERENTIAL-ALGEBRAIC APPROACH TO COUPLED PROBLEMS OF DYNAMIC THERMOELASTICITY

An efficient numerical approach for the general thermomechanical problems was developed and it was tested for a two-dimensional thermoelasticity problem. The main idea of our numerical method is based on the reduction procedure of the original system of PDEs describing coupled thermomechanical behavior to a system of Differential Algebraic Equations (DAEs) where the stress-strain relationships are treated as algebraic equations. The resulting system of DAEs was then solved with a Backward Differentiation Formula (BDF) using a fully implicit algorithm. The described procedure was explained in detail, and its effectiveness was demonstrated on the solution of a transient uncoupled thermoelastic problem, for which an analytical solution is known, as well as on a fully coupled problem in the two-dimensional case.     

二次特征矩阵表示的特征值有界性分析

采用二次特征矩阵近似表示精确有限元和精确动态子结构分析中得出的超越或非线性动态刚度阵，并证明了在满足一定条件的前提下，二次特征阵给出的特征值是精确刚度阵特征值的上界或下界。     

简论岩体的力学模型

从岩体的地质特征和力学行为出发，分别讨论岩体的力学模型，运用劳丹的科学合理性模式分析连续介质和不连续介质两类力学模型的作用和地位，提出两类模型不是对产的而是互补的，今后的发展是建立既能反映性又能反映不连续性的统一的岩体力学模型。     

UPWIND LOCAL DIFFERENTIAL QUADRATURE METHOD FOR SOLVING COUPLED VISCOUS FLOW AND HEAT TRANSFER EQUATIONS

The differential quadrature method (DQM) has been applied successfully to solve numerically many problems in the fluid mechanics. But it is only limited to the flow problems in regular regions. At the same time, here is no upwind mechanism to deal with the convective property of the fluid flow in traditional DQ method. A local differential quadrature method owning upwind mechanism (ULDQM) was given to solve the coupled problem of incompressible viscous flow and heat transfer in an irregular region. For the problem of flow past a contraction channel whose boundary does not parallel to coordinate direction, the satisfactory numerical solutions were obtained by using ULDQM with a few grid points. The numerical results show that the ULDQM possesses advantages including well convergence, less computational workload and storage as compared with the low-order finite difference method.     

基于双重自适应的六面体网格再生成方法

提出了一种以栅格法为基本方法,基于几何特征和物理场量双重自适应的六面体网格再生成方法。首先,依据旧网格的表面曲率和几何特征,采用基于栅格法的几何自适应网格再生成方法,生成密度受控的基础网格;然后,将旧网格的物理场量传递到基础网格中;最后,采用有限元误差估计方法对新网格单元的计算误差进行估计,对误差较大的单元进行加密,减...     

有初内力的板的内共振

本文利用非线性时空有限方法和样条有限元技术对具有初内力的板的非线性频响特性进行了分析，计算了在不同初始内力下方板的大振幅自由振动、有阻尼强迫振动和矩形板的内共振。     

基于CUDA的有限元矩阵并行装配算法研究

构建航天飞行器的结构有限元模型是准确模拟飞行仿真、完成飞行器在轨飞行阶段结构故障监测和诊断的基础。采用细长体飞行器简化梁模型，提出新的基于CUDA（Compute Unified Device Architecture）的有限元单元刚度矩阵生成和总刚度矩阵组装算法。依据梁单元矩阵的对称性，结合GPU硬件架构提出并行生成算法并进行改进。为有效减少装配时间，在装配过程中采用着色算法，提出了基于GPU（Graphics Processing Unit）共享内存的非零项组装策略，通过在不同计算平台下算例对比，验证了新算法的快速性。数值算例表明，本文算法的求解效率较高，针对一定计算规模内的模型可满足快速计算与诊断的实时性要求。     

欸乃一声山水绿--摇橹的力学

简要介绍了橹的基本结构与橹的力学原理，并对古代诗词中有关橹的一些力学特征的描述进行了解释．     

DUAL CHARACTERS OF INTERACTION BETWEEN PARTICLES AND FLUID

The unique characteristics of gas-solids two-phase flow and fluidization in terms of the flow structures and the apparent behavior of particles and fluid-particle interactions are closely linked to physical properties of the particles, operating conditions and bed configurations. Fluidized beds behave quite differently when solid properties, gas velocities or vessel geometries are vaded. An understanding of hydrodynamic changes and how they, in turn, influence the transfer and reaction characteristics of chemical and thermal operations by variations in gas-solid contact, residence time, solid circulation and mixing and gas distribution is very important for the proper design and scale-up of fluidized bed reactors. In this paper, rather than attempting a comprehensive survey, we concentrate on examining some important positive and negative impacts of particle sizes, bubbles, clusters and column walls on the physical and chemical aspects of chemical reactor performance from the engineering application point of view with the aim of forming an adequate concept for guiding the design of multiphase fluidized bed chemical reactors.     

A UNIVERSAL APPROACH FOR CONTINUOUS OR DISCRETE NONLINEAR PROGRAMMINGS WITH MULTIPLE VARIABLES AND CONSTRAINTS

IntroductionExtensive research works have been published for solving nonlinear mathematicprogramming problems.Nonetheless,it is still difficult to find an effective and universalapproach for general programming problems with multiple design variables and …