新型暂堵酸化用自降解暂堵剂的制备及现场应用

针对传统暂堵酸化用暂堵剂颗粒耐酸性差、降解性差和除堵工艺复杂等问题，本研究通过水溶液自由基聚合法制备了一种新型的自降解暂堵剂CQZDJ。考察了单体加量、交联剂加量、引发剂加量对CQZDJ凝胶强度和降解性的影响；通过FT-IR、TGA、SEM对其结构进行表征；并对其降解机理进行了探讨；最后在长8区块的环平81-8实验井进行了现场实践。结果表明：CQZDJ凝胶强度及降解时间与单体加量、交联剂加量、引发剂加量成正比关系，且降解时间可控；降解性实验表明CQZDJ在(1%~10%)HCl溶液、水、（2%~10%）NaCl溶液中均可在4 d内完全降解，具备良好的降解性能，对地层伤害小；SEM照片显示CQZDJ的降解过程是从初始三维网状结构逐渐崩解为层状结构，最终降解为无规则线性小分子链的过程；暂堵后现场流压上升6.3 MPa，日产油由3.87 t/d增产至5.22 t/d，实现了储层的有效改造，增产效果显著。      

用于高功率系统的掺镱石英光纤研究进展及发展趋势

掺镱石英光纤是掺镱光纤激光器及放大器的重要基础元件.掺镱光纤性能提升是促进掺镱光纤激光器系统功率进一步攀升的关键.本文回顾了高功率掺镱光纤激光器系统功率攀升情况及功率限制性问题,简述了针对激光功率攀升的瓶颈问题所提出的改善性方案.重点阐述了掺镱光纤制备技术、光纤材料、结构性设计在改善功率限制性方面所取得的研究进展,并对未来掺镱石英光纤的研究及发展趋势进行了展望.     

Material growth and device fabrication of terahertz quantum-cascade laser based on bound-to-continuum structure

The terahertz quantum-cascade laser （THz QCL） based on bound-to-continuum structure is demonstrated. The X-ray diffraction measurement of the material shows a high crystalline quality of the active region. A THz QCL device was fabricated with semi-insulating surface-plasmon waveguide. The test device is lasing at about 3 THz and operating up to 60 K. It shows a single frequency property under different drive currents and temperatures. At 9 K, the maximum output power is greater than 2 mW with a threshold current density of 159 A/cm2.     

纳米二氧化硅的制备及其在橡胶中的应用研究进展

二氧化硅是一种重要的无机材料,无毒,对环境无污染,具有非常广泛的用途.近年来已经有大量文献报道了纳米二氧化硅的制备及其应用.本文综述了国内外相关文献,介绍了纳米二氧化硅的几种制备工艺,以及在硅橡胶、医用橡胶、轮胎橡胶、日用橡胶制品、胶管胶带和胶鞋中的应用,并展望了纳米二氧化硅的发展方向和应用前景.     

不对称催化氧化制备(S)-泮托拉唑

以(2S,3S)-N,N’-二苄基-酒石酸二酰胺和Ti(O-Pri)4形成的手性络合物为催化剂,枯烯过氧化氢为氧化剂,不对称催化氧化制备了(S)-泮托拉唑,转化率87%,纯化后的化学纯度>99.5%,光学纯度99.5%,硫醚含量<0.1%,砜含量<0.1%,其结构经1H NMR确证。     

介绍一个与材料相关的研究型综合化学实验——壳聚糖的制备与表征

在中国科学技术大学夏季学期的研究型实验课程"化学科研基础训练"中开设"壳聚糖的制备与表征"综合实验,以龙虾壳为原料,通过除蛋白、脱盐、脱色、脱乙酰等一系列反应,制备得到目标产物壳聚糖。运用红外光谱、核磁共振仪、黏度法、滴定等对产品的结构及性能进行表征。     

Fabrication,Characterization and Optical Properties of TiO2 Nanotube Arrays on Boron-doped Diamond Film Through Liquid Phase Deposition

TiO2 nanotube（TiNT） arrays were deposited on boron-doped diamond films by a liquid-phase deposition method with ZnO nanorod arrays as the template.The different morphologies of TiNTs have been obtained by controlling the morphology of ZnO template.The X-ray diffraction and energy-dispersive X-ray analysis show that the ZnO nanorod array template has been removed in the TiNTs formation process.The crystalline quality of the TiNTs is improved by increasing the annealing temperature.The band gap of the TiNTs is about 3.25 eV estimated by the UV-Vis absorption spectroscopy,which is close to the value of bulk TiO2.In the photoluminescence spectrum,a broad visible emission in a range of ca.550-750 nm appears due to the surface oxygen vacancies and defects.     

Intermetallic Pt2Si：magnetron-sputtering preparation and electrocatalysis toward ethanol oxidation

Although most transition metals have been tested as the promoter to Pt for electrocatalysis toward fuel cell reactions,semi-conductor elements,such as Si,have hitherto not been examined.Here we report a simple synthesis of intermetallic Pt2Si electrode using magnetron sputtering and the electrocatalysis toward ethanol oxidation reaction（EOR）.In comparison to Pt,the intermetallic Pt2Si surface turns out to be much more active in catalyzing the EOR：the onset potential shifts negatively by 150 mV,and the current density at 0.6 V increases by a magnitude of one order.Such an enormous enhancement in EOR catalysis is ascribed to the promotion effects of Si,which can not only provide active surface oxygenated species to accelerate the removal of COads,but also strongly alter the electronic property of Pt,as clearly indicated by the core-level shift in XPS spectrum.