SO 2 sorption properties of fly ash zeolites

In the presented study, the sulfur dioxide sorption properties of fly ash zeolite X were investigated. Sorption tests were performed on fly ash zeolite samples that were not prepared specially for sorption, in addition to dried samples and samples in the presence of water vapor. The samples saturated with water vapor showed the highest sorption capacity. The sorption capacity of the samples additionally dried prior to the sorption experiment was higher than that of the samples that were not specially prepared for the sorption test. Regeneration tests indicated relatively good regeneration properties. The obtained results were described with the use of Langmuir, Sips, and Dubinin–Astakhov models, with the Dubinin–Astakhov model providing the best fit.     

A Hydrolytically Stable Vanadium(IV) Metal–Organic Framework with Photocatalytic Bacteriostatic Activity for Autonomous Indoor Humidity Control

Metal–organic frameworks (MOFs) with long‐term stability and reversible high water uptake properties can be ideal candidates for water harvesting and indoor humidity control. Now, a mesoporous and highly stable MOF, BIT‐66 is presented that has indoor humidity control capability and a photocatalytic bacteriostatic effect. BIT‐66 (V₃(O)₃(H₂O)(BTB)₂), possesses prominent moisture tunability in the range of 45–60 % RH and a water uptake and working capacity of 71 and 55 wt %, respectively, showing good recyclability and excellent performance in water adsorption–desorption cycles. Importantly, this MOF demonstrates a unique photocatalytic bacteriostatic behavior under visible light, which can effectively ameliorate the bacteria and/or mold breeding problem in water adsorbing materials.     

Sorption and diffusion of water vapor in polyimide films

Sorption and diffusion of water vapor are investigated gravimetrically for polyimide films. The activity dependence of the solubility and diffusion coefficients, S and D, respectively, is classified under four types: (1) constant S and D type, (2) dual-mode sorption and transport type, (3) dual-mode type followed by a deviation due to a plasticization effect at high vapor activity, and (4) constant S and D type followed by a deviation due to water cluster formation at high activity. For the dual-mode type, the Henry's law component is much larger than the Langmuir component except at low activity, and therefore deviation in behavior from the first type is small. S is larger for polyimides with higher content of polar groups such as carbonyl, carboxyl, and sulfonyl. D is larger for polyimides with a higher fraction of free space, with some exceptions. The polyimide from 3,3′,4,4′-biphenyltetracarboxylic dianhydride and dimethyl-3,7-diaminodibenzothiophene-5, 5-dioxide belongs to the third type and displays both large S and large D. The polyimide from 2,2-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride and 4,4′-oxydianiline belongs to the fourth type, and has the largest D but rather small S because of the hydrophobic C(CF₃)₂ groups. © 1992 John Wiley & Sons, Inc.     

Thermally stable polyimide isomers for membrane-based gas separations at elevated temperatures

The temperature dependence of gas sorption and transport properties is examined for two polyimide isomers. The permeabilities and solubilities of five gases in these materials are reported over an extensive temperature range from 35 to 325°C. Also, the activation energies for permeation, the heats of sorption, and the activation energies for diffusion obtained for both polyimides are compared and correlated with physical properties of the polymers and penetrants. The influence of temperature on the selective properties of these membrane materials is discussed for three gas separations; He/N₂, CO₂/CH_4, and O₂/N_2. Thorough analysis of these data provides insight into the influence of the subtle difference in chain structure of the two isomers. The performance of the 6FDA-6F_p DA as a separation membrane at high temperatures suggests that it is an outstanding candidate for use in novel elevated temperature applications. ©1995 John Wiley & Sons, Inc.     

Heats of displacement of hydrogen from palladium by noble gases

It has been observed that noble gases, such as helium, neon and argon produce heat evolution when contacted with Pd powder partially saturated with hydrogen. These phenomena have been studied with flow-through adsorption microcalorimetry. The observed exothermic effects are comparable to those usually associated with the heat of sorption of hydrogen in palladium. It is suggested that the noble gases displace the adsorbed H species from the surface of Pd, causing their reabsorption in the Pd lattice with the exothermic heat of PdH bonds formation, or the formation of H₂, both heat evolutions being observed with a flow-through microcalorimeter.     

膜动态吸附传递过程的理论分析与研究

本文针对气体透过薄膜的传质过程,基于动态吸附、扩散传递的概念,根据Langmuir界面动态吸附理论,研究了存在定向传递时表面吸附量与平衡吸附量的差异,从而将膜相传质分为吸附、内部扩散和脱附三个动态过程.讨论了界面吸附、脱附与扩散对传质阻力的不同影响,建立了薄膜传质的串联阻力模型.     

Interaction of 1-anilinonaphthalene-8-sulphonate with cross-linked poly (N-vinyl-2-pyrrolidone)

The interaction of 1-anilinonaphthalene-8-sulphonate (ANS) with cross-linked poly(N-vinyl-2-pyrrolidone) (CPVP) was studied by the adsorption technique at different temperatures and at two different pH values. Analysis by the Scatchard method and the study made in the presence of urea showed that the iceberg structure of water affects the sorption of ANS to CPVP, leading to cooperativity. The observed Giles sorption isotherms at both the pH values were of theL-type which indicated the interaction of ANS in flat configuration with the binding site in CPVP. The sorption of ANS to CPVP was enhanced considerably at acidic pH due to some structural factors which also resulted in multilayer sorption at this pH. Comparison of binding of ANS to CPVP and to linear poly(N-vinyl-2-pyrrolidone) demonstrated the greater contribution of hydrophobic interaction in CPVP than in the linear polymer.     

Sorption and partial molar volumes of C2 and C3 hydrocarbons in polypropylene copolymers

The sorption of C₂ and C₃ hydrocarbons in two ethylene–propylene copolymers and a propylene homopolymer and the simultaneous dilation of the polymers were measured at temperatures of 287–363 K and pressures up to 4 MPa. The sorption isotherms were well described by the Flory–Huggins theory of dissolution. Dilation isotherms in the form of elongation versus pressure were similar in shape to the corresponding sorption isotherms. Solubility coefficients, partial molar volumes, and Flory–Huggins interaction parameters were determined from these isotherms. The thermal expansivities of the hydrocarbons dissolved in the polymers were 0.002–0.005 K^?1, and the Flory–Huggins interaction parameters depended not only on temperature but also on concentration. At 323 K, the calculated solubilities of propylene in the ethylene–propylene‐rubber regions of the copolymers were 1.8 times higher than in the amorphous regions of the propylene homopolymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1255–1262, 2001     

Sorption of tributyltin in seawater by municipal solid waste compost

The use of municipal solid waste (MSW) compost as a sorbent for tributyltin (TBT) in seawater was investigated. TBT‐contaminated seawater, both artificially prepared and that collected from Msida Creek yacht marina (Malta), was allowed to percolate through untreated and water‐washed columns of compost and then analysed for organotins using gas chromatography‐flame photometric detection. About 90% of dissolved TBT ranging in concentration from about 800 to 8000 ng_Snl^?1 was sorbed by treating 500 ml solutions with 100 g untreated compost. On the other hand, no detectable breakthrough of TBT was observed from compost that had previously been washed by water to remove soluble organic matter. Breakthrough of TBT from unwashed compost is thought to be due to formation of complexes between the soluble organic matter in compost and aquated TBT, which renders the organotin more hydrophilic. The use of washed MSW compost as sorbent for the purification of TBT‐contaminated waters generated in large quantity during hull‐cleaning activities in drydocks is suggested as a mitigatory measure against the impact of TBT on the coastal marine environment. Copyright © 2001 John Wiley & Sons, Ltd.