Pore size distributions in low‐k dielectric thin films from X‐ray porosimetry

X‐ray reflectivity has been used to determine the mass uptake of probe molecules in porous thin films supported on thick silicon wafers. The adsorption occurs by capillary condensation when the films are exposed to probe vapor at controlled partial vapor pressures. The probe solvent partial pressure was varied by mixing saturated air and dry air at constant temperature or by changing sample temperature at a constant vapor concentration. Pore size distribution in the films can be calculated from the probe uptake with typical porosimetric approaches such as the application of the Kelvin equation to convert partial pressure into pore size. For illustration, the pore size distribution of three different nanoporous thin films, the primary candidate of ultra‐low‐k interlevel dielectrics in the next generation of integrated circuit chips, was determined with this technique. These samples represent different generations of low‐k dielectrics developed by industry. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2170–2177, 2002     

Coupling between polymer adsorption and colloidal particle aggregation

Studies of the adsorption of high molecular weight polymers on colloidal latex and silica particles and their subsequent flocculation were carried out. Neutral polyethylene oxide samples with both a narrow and a broad molecular weight distribution were used together with low charged cationic copolymers. The influence of the particle concentration and polymer dose on the flocculation were systematically investigated under quiescent conditions.Equilibrium bridging only occurred with polyelectrolyte, even in very dilute suspensions, at high particle coverage. In contrast to this, non-equilibrium bridging occurred with both neutral polymer and polyelectrolytes but only for more concentrated suspensions and small amounts of adsorbed polymer. Polymer adsorption in dilute suspensions, which did not show particle aggregation was measured an electrophoretic technique. In more concentrated suspensions, where flocculation takes place, we found that aggregation prevents further polymer adsorption and induces both an excluded volume and a surface effect. The consequences on the shape of the isotherms differ according to the aggregation mechanism.A significant decrease of the amount, , of adsorbed polymer is observed with non-equilibrium bridging. When both mechanisms simultaneously contribute to the aggregation, the value of depends on their relative importance. In the intermediate range of copolymer dose their respective contributions are critically sensitive to the details of the mixing step and stirring, leading to non reproducible experimental results.     

Na2SeO3在Fe电极上还原和吸附机理

采用循环伏安法、恒电势电解法、恒电流阶跃法及交流阻抗法研究Na2SeO3提高锌锰合金电沉积电流效率的作用机理.证明在锌锰合金电沉积的条件下，Na2SeO3 阴极被还原为Se32－并吸附在阴极表面上，从而阻止了氢原子在阴极表面的吸附，因而减少了氢离子的阴极还原.拟定了Na2SeO3的反应和吸附机理，用交流阻抗法进一步证明了所拟机理的正确性.     

Molecular structure of mixed adsorption layers surfactant—polymer at a liquid—liquid interface

Isotherms of the binding of dodecyl sulfate anions (DDS^–)and Na⁺ counterions during their coadsorption with a nonionic polymer. proxanol (PR). at the interface of dodecane-water emulsions have been measured by conductometry and Na-selective potentiometry. The adsorption of DDS^– and PR is concurrent. The affinity constant of PR to the interface determined by the Langmuir model decreases as the concentration of PR increases, and the surface concentration of DDS^– tends to a nonzero limiting value at high concentrations of PR. The surface (_o) and electrokinetic () potentials at the interface have been determined at various polymer concentrations by the spin probe and electrophoresis methods. The average dielectric permeability and density of polymer segments in We adsorption layer have been determined by ESR. The lower boundary of the hydrodynamic thickness of the polymer adsorption layer at the interface has been estimated from the dependences of _o and on the ionic strength.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1653–1661, July, 1996.     

黄孢展齿革菌菌丝球同时吸附铅镉离子的动力学

采用间歇法，利用黄孢展齿革菌菌丝球吸附溶液中的Pb^2 和Cd^2 ，研究Pb^2 和Cd^2 共存体系中吸附初速率随初始浓度的变化规律。实验结果表明，少量Cd^2 的存在促进其对Pb^2 的吸附，并提高吸附初速率，但随着Cd^2 初始浓度的增加，促进作用逐渐减弱并转为抑制作用；Cd^2 的吸附初速率随着Pb^2 初始浓度增大而减小；Pb^2 和Cd^2 的吸附初速率都随自身初始浓度的增加而增大。     

Comments on surface structure analysis by water and nitrogen adsorption

Specific surface area and pore size distribution are determined usually from adsorption isotherms at low temperatures using nitrogen or noble gases. These are not absolute parameters and the measuring methods are fraught with serious difficulties. General problems of sorption measurements and recent developments are discussed. To obtain information for practical purposes these measurements need to be supplemented by investigations of the sorbate/sorbent system used in practice. Results of the measurement of nitrogen and water vapour adsorption on different materials are compared. This revised version was published online in July 2006 with corrections to the Cover Date.     

应用大孔吸附树脂从农药废水中回收毕克草

毕克草为一种新型除草剂,通常情况下很难被降解,本文利用物理吸附原理通过自行制备的大孔吸附树脂从农药水中对其进行了回收,回收效果良好,同时也达到了废水处理的目的。优化的最佳实验条件:室温下,pH=1.0以及流速为5BV/h时,对COD为15000mg/L的毕克草废水吸附处理后,其出水可达《污水综合排放标准》(GB89—1996)中的一级排放标准;洗脱再生时,室温下,用95%的乙醇洗脱,流速为2BV/h,(即2倍树脂床体积/h)回收率可达98.4%,纯度达93.7%,总流程一次可处理该废水240mL。     

水中痕量酚的富集和紫外分光光度测定法的研究

本文研究了用微型树脂柱快速富集,分离,紫外分光光度测定水中痕量酚的方法。结果表明,以GDX-502为吸附剂,水样pH为1～3并含0.2mol/L氯化钠,以每分种15～20ml的速度通过吸附柱,以热的1％氢氧化钠水溶液为淋洗剂时,在291nm处测定苯酚的回收率为89～98％。此外探讨了干扰物的消除方法。吸附柱对苯酚的富集倍数达300倍,最低检测限为0.001ppm。方法精密度为0.3(％),相对标准偏差为3.18％。本法对实际水样进行了测定。结果满意。     

THE SEPARATION,PURIFICATION AND DECOLORIZATION OF NEW ANTIBIOTICS-MILUPEINAN USING ADSORPTION RESIN

1. INTRODUCTION Fig.1 The Chemical Structure of Milupeinan As a new type of antibiotics Milupeinan, not only possesses antibacterial activities against a wide range of Gram-positive and Gram-negative bacteria, but also higgh stability under th…     

胶原纤维固化黑荆树单宁吸附V(V)的研究

研究了胶原纤维固化黑荆树单宁对V(V)的吸附。采用不同温度、pH值等条件进行吸附研究,并进一步探讨了固化黑荆树单宁的吸附动力学和吸附柱动力学及其吸附机理。结果表明,该材料对V(V)的吸附平衡符合Freund lich方程,温度对吸附平衡的影响不明显;吸附动力学可用拟二级速度方程来描述,该材料同时具有良好的柱动力学特性;V(V)的吸附过程可能存在三个反应,即V(V)与吸附剂之间发生氧化还原反应生成V(IV),V(IV)和-COOH之间发生离子交换反应,以及V(IV)与单宁的邻位羟基发生螯合。