Post‐Synthetic Polymerization of UiO‐66‐NH2 Nanoparticles and Polyurethane Oligomer toward Stand‐Alone Membranes for Dye Removal and Separation

Metal–organic frameworks (MOFs) are widely used as porous materials in the fields of adsorption and separation. However, their practical application is largely hindered by limitations to their processability. Herein, new UiO‐66‐Urea‐based flexible membranes with MOF loadings of 50 ( 1 ), 60 ( 2 ), and 70 wt % ( 3 ) were designed and prepared by post‐synthetic polymerization of UiO‐66‐NH₂ nanoparticles and a polyurethane oligomer under mild conditions. The adsorption behavior of membrane 3 towards four hydrophilic dyes, namely, eosin Y (EY), rhodamine B (RB), malachite green (MG), and methylene blue (MB), in aqueous solution was studied in detail. It exhibits strong adsorption of EY and RB but weak adsorption of MG and MB in aqueous solution. Owing to the selective adsorption of these hydrophilic dyes, membrane 3 can remove EY and RB from aqueous solution and completely separate EY/MB, RB/MG, and RB/MB mixtures in aqueous solution. In addition, the membrane is uniformly textured, easily handled, and can be reused for dye adsorption and separation.     

An effective projection-based nonlinear adaptive control strategy for heavy vehicle suspension with hysteretic leaf spring

Nonlinear Dynamics - A new nonlinear adaptive control strategy for electrohydraulic active suspensions with the hysteretic leaf spring is proposed to improve suspension performances of heavy...     

X-ray diffraction and Raman spectra of merrillite at high pressures

ABSTRACT

The compressibility and effect of pressure on the vibrations of merrillite, Ca₉NaMg(PO₄)₇, were studied by using diamond anvil cell at room temperature combined with in-situ synchrotron X-ray diffraction and Raman spectroscopy up to about 18 and 15?GPa, respectively. The pressure-volume data was fitted by a third-order Birch–Murnaghan equation of state to determine the isothermal bulk modulus as K₀ ?=?87.2(32) GPa with pressure derivative K₀′?=?3.2(4). If K₀′?=?4, the isothermal bulk modulus was obtained as 81.6(10) GPa. The axial compressibility was estimated and an axial elastic anisotropy exists since a-axis is less compressible than the c-axis. The Raman frequencies of all observed modes for merrillite continuously increase with pressure, and the pressure dependences of stretching modes (v ₃ and v ₁) are larger than those of the bending modes (v ₄ and v ₂) and external modes. The isothermal mode Grüneisen parameters and intrinsic anharmonicity of merrillite were also calculated.     

非晶态固体的结构可以决定性能吗?

晶态固体的力学性能与塑性变形主要由结构缺陷, 比如位错的运动决定. 而在非晶态固体中结构如何决定性能, 仍然是固体力学、材料学和凝聚态物理学共同关心但尚未解决的核心问题之一.传统材料学研究的经典范式为"结构决定性能". 遵循这一信条, 已经有大量的实验表征与理论、模拟研究, 尝试将非晶态固体的某种结构特征与性能建立一一对应关系. 但是, 科学界对于非晶固体结构-性能关系成立与否, 以及背后隐藏的规律知之甚少. 本文针对非晶态固体的变形机制以及其微结构特征, 基于分子动力学模拟, 定量评估短程简单结构与中长程复杂结构在决定非晶态固体动力学性能方面的效用. 通过海量抽样每种具体玻璃结构的激活能(标识激发难易程度), 尝试将结构参数与激活能建立定量关系, 从而揭示出非晶态固体结构-性能关系的隐藏主控因素为结构的空间关联, 受限比几何结构本身更关键. 只有某种结构在空间上呈现亚纳米级的空间关联长度, 这种完备结构才有可能有效地决定非晶态固体的力学性能, 而短程简单结构则无效. 进一步, 给出了评价非晶态固体结构预测性能有效性的普适定量方法, 为建立广义无序物质的结构-性能关系提供了筛选准则.      

Improved production of levoglucosan and levoglucosenone from acid-impregnated cellulose via fast pyrolysis

Cellulose - In this research, the production of levoglucosan (LG) and levoglucosenone (LGO) was improved from acid-impregnated cellulose via fast pyrolysis. Thermogravimetric and kinetic analysis...     

Prediction of allergic reaction risk of Shenmai injection based on real-world evidence coupled with UPLC–Q-TOF-MS

The allergic reaction (AR) of Chinese herbal injection (CHI) has become one of the most noticeable focuses of public health in China. However, it still remains a considerable controversy as to whether low-molecular-weight components in CHI have potential sensitization. In this study, the relationship between AR and low-molecular-weight component profile of Shenmai injection was explored by an interdisciplinary technology integrating real-world evidence and ultra-performance liquid chromatography–quadrupole time-of-flight mass spectroscopy (UPLC–Q-TOF-MS). The AR information of hospitalized patients was obtained by comprehensively analyzing real-world evidence from January 2015 to June 2019 at two Chinese hospitals. The UPLC–Q-TOF-MS was exploited to systematically investigate the low-molecular-weight component profile with 50–1500 m/z mass range, and 3725 MS1 peaks were detected. The optimized partial least squares discriminant analysis model was established to map the influence of low-molecular-weight components on AR. The results of this study showed that high levels of organic acids administered intravenously might be a potential risk factor for inducing AR. By using this method, Shenmai injection with high AR risk could be recognized precisely with 100% accuracy before clinical use.     

Developing the Low-Temperature Oxidation Mechanism of Cyclopentane: An Experimental and Theoretical Study

At present, the reactivity of cyclic alkanes is estimated by comparison with acyclic hydrocarbons. Due to the difference in the structure of cycloalkanes and acycloalkanes, the thermodynamic data obtained by analogy are not applicable. In this study, a molecular beam sampling vacuum ultraviolet photoionization time-of-flight mass spectrometer (MB-VUV-PI-TOFMS) was applied to study the low-temperature oxidation of cyclopentane (CPT) at a total pressure range from 1–3 atm and low-temperature range between 500 and 800 K. Low-temperature reaction products including cyclic olefins, cyclic ethers, and highly oxygenated intermediates (e. g., ketohydroperoxide KHP, keto-dihydroperoxide KDHP, olefinic hydroperoxides OHP and ketone structure products) were observed. Further investigation of the oxidation of CPT – electronic structure calculations – were carried out at the UCCSD(T)-F12a/aug-cc-pVDZ//B3LYP/6-31+ G(d,p) level to explore the reactivity of O₂ molecules adding sequentially to cyclopentyl radicals. Experimental and theoretical observations showed that the dominant product channel in the reaction of CPT radicals with O₂ is HO₂ elimination yielding cyclopentene. The pathways of second and third O₂ addition – the dissociation of hydroperoxide – were further confirmed. The results of this study will develop the low-temperature oxidation mechanism of CPT, which can be used for future research on accurately simulating the combustion process of CPT.