聚醚酮酮(PEKK)/4,4''''-二苯氧基二苯砜(DPODPS)多嵌段共聚物的合成与性能

采用溶液缩聚法由酰氯端基聚醚酮酮(PEKK)齐聚物和4,4′-二苯氧基二苯砜(DPODPS)制备了PEKK/DPODPS多嵌段共聚物,用DSC、TGA等方法对共聚物进行了表征和性能测试.结果表明,随着共聚物中DPODPS含量的增加,共聚物的熔融温度逐渐降低,而其玻璃化转变温度则逐渐升高.当DPODPS质量分数在32.63%～40.73%范围内时,所得共聚物的Tg为185～193℃,比纯PEKK的Tg高出20～28℃;其Tm为322～346℃,比纯PEKK的Tm降低35～59℃,这既保持了纯PEKK的耐热性,又改善了熔融加工性能.该组成范围内的共聚物的拉伸强度(σt)为86.6～84.2 MPa,拉伸模量(M)为3.1～3.4 GPa,断裂伸长率(ε)为18.5%～20.3%.     

聚醚型非离子表面活性剂的混合表面膜III, 环氧乙烷一环氧丙烷嵌段共聚物, 聚丙二醇与十六醇, 硬脂酸的二元混合物

本文进一步研究了环氧乙烷-环氧丙烷嵌段共聚物(L61和F68)、聚丙二醇(PPG)分别与十六醇(CA)、硬脂酸(SA)所形成的二元混合膜。根据对π-α实验结果的分析, 表明PPG-CA、PPG-SA、F68-SA和L61-SA的混合单分子膜是不相混溶的, 而L61-CA和F68-CA的混合单分子膜则是混溶的。     

~(19)F-NMR法测定聚醚多元醇中伯羟基的相对含量

<正> 聚醚多元醇是聚氨酯材料的主要原料之一.多元醇中伯羟基含量的多少对反应活性有着直接的影响,因此,准确地测定伯羟基含量已成为许多研究者关心的课题,并已报道了不少测定方法,其中主要包括化学动力学方法、~1H-核磁共振(NMR)法和~(19)F-NMR法,~1H-NMR法系利用不同的酰化剂,将聚醚多元醇酰化后测其酰化物的~1H-NMR谱,从伯、仲羟基相应的酯基氢的积分比例来计算伯羟基的相对含量,但由于体系中存在其它含氢基因,且是大量的,使测量困难或应用受到限制.~(19)F-NMR法测伯羟     

接触角法研究医用聚醚聚氨酯材料表面自由能与界面自由能

<正> 表面性质在医用材料与生物体的相互作用中起着至关重要的作用,如血液相容性材料的表面对血细胞具有吸附、变形、凝血、溶血等作用。表面能和界面能是医用材料的重要研究内容之一,材料的表面能及其极性与非极性分量在影响或控制材料与生物体的相互作用之面一直是医用材料的重要课题。Raier曾提出当材料的临界表面张力在20-30erg/cm~2时,血液相容性好,也有人认为,血液与材料的界面自由能趋于零时,才能     

N-甲基丙烯酰-N′-甲基哌嗪在嵌段聚醚氨酯膜上的Co60-γ辐射接枝的研究

The graft copolymerization of N-methacryl-N'-methyl-opiperazine onto segmented polye-therurethane (SPEU) film by Go⁶⁰-r-preirradiation has been studied. It is found that the grafting time varies with structure of different chain extenders. The grafted substrated become opaque, the contact angle drops down and from SEM photographs with salient micrograph showing grafts of macrochain on the surface of SPEU film.     

Williamson法合成两亲性聚醚砜酮-聚乙二醇接枝共聚物

含二氮杂萘酮结构的聚醚砜酮(PPESK)是一种新型的耐热可溶解工程塑料,其玻璃化温度高达263~305℃,可用来制造耐高温气体分离、超滤和纳滤膜,表现出优异的综合性能[1~4].然而,膜材料本身的疏水特性使PPESK膜在过滤操作中易遭受膜污染,导致膜性能下降,对膜材料进行亲水化改性以抑     

尼龙6,6(PA_(6,6)及其共混物结晶性能的研究

<正> 尼龙6,6(PA_(6,6))是一种典型的结晶性工程塑料,被广泛应用于纺织、机械制造等行业,但其加工温度范围较窄,耐热性差。聚醚砜(PES)具有较高的玻璃化转变温度,是非晶聚合物,可以诱发某些结晶聚合物结晶。PES与PA_(6,6)共混体系的研究报道较少,本文用熔融法将PES与PA_(6,6)制成共混物,企图改善PA_(6,6)的结晶性,以提高其耐热性,取得了较理想的结果。     

The spreading behaviour of perfluoropolyether droplets on solid surfaces

The spread of perfluoropolyether （PFPE） droplets on solid surfaces has been measured from the top-down view through a microscope system. Effects of substrates, molecular weight and end-group functionality on spreading of the PFPE droplets have been studied experimentally and the results were compared with those by molecular dynamics （MD） simulations. Silicon wafer and diamond-like carbon （DLC） substrates were used to study the effect of substrates on spreading. Two types of PFPE, Z-dol and Z-tetraol, with the same chain structure and various molecular weights （2000 and 4000 g/mol） were employed in experiments. Effect of molecular weight has been investigated through comparing the spreading of Z-dol 2000 and Z-dol 4000, and it is found that the increase of molecular weight will decrease the mobility of PFPE. Comparison between spreading of Z-dol and Z-tetraol of the same molecular weight proved that functional end group plays a significant role on the spreading of PFPE, which confirmed the MD simulation results.     

Synthesis and Characterizaiton of Poly（ether imide）s Containing m—Methyl and Phthalazinone Moieties

Three novel poly(ether imide)s were synthesized by one-step solution polymerization from 2-(3,4-dicarboxyl-N-phenyl)-4-(3‘‘‘‘‘‘‘‘,4‘‘‘‘‘‘‘‘-dicarboxly-phenoxyl-4-(2-methyl)-phenyl)-2,3-phthalazin-l-one dianhydride and three amines,and characterized.The polymers show good solubility and thermal properties.