Low-voltage electroosmosis pump for stand-alone microfluidics devices

Two types of low-voltage electroosmosis pumps were developed using microfabrication technology for usage in handy or stand-alone applications of the micrototal analysis systems (micro-TAS) and the lab-on-a-chip. This was done by making a thin (< 1 microm) region in the flow path and by only applying voltages near this thin region using electrodes inserted into the flow path. The inserted electrodes must be free from bubble formation and be gas-tight in order to avoid pressure leakage. For these electrodes, Ag/AgCl or a gel salt bridge was used. For patterning the gel on the chip, a hydrophilic photopolymerization gel and a photolithographic technique were optimized for producing a gel with higher electric conductivity and higher mechanical strength. For high flow rate application, wide (33.2 mm) and thin (400 nm) pumping channels were compacted into a 1 mm x 6 mm area by folding. This pump achieves an 800 Pa static pressure and a flow of 415 nL/min at 10 V. For high-pressure application, a pump was designed with the thin and thick regions in series and positive and negative electrodes were inserted between them alternatively. This pump could increase the pumping pressure without increasing the supply voltage. A pump with 10-stage connections generated a pressure of 25 kPa at 10 V.     

Flow-injection spectrophotometry of manganese by catalysis of the periodate oxidation of 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid)

A sensitive flow-injection spectrophotometric procedure is proposed for the determination of manganese(II), based on its catalytic effect on the oxidation of 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) with periodate. By monitoring the change in absorbance of the oxidation product of ABTS at 415 nm, manganese(II) in the range 0.05–1.0 ng ml⁻¹ can be determined with a sampling frequency of 30 h⁻¹. A relative standard deviation (R.S.D.) (n=10) is 1.6% at the 0.5 ng ml⁻¹ level. The proposed method suffers from few interferences and has been successfully applied to the determination of manganese in river, lake and seashore water samples.     

A simple HPLC method for simultaneous determination of lopinavir,ritonavir and efavirenz

We developed a simple HPLC method for the simultaneous determination of lopinavir (LPV), ritonavir (RTV) and efavirenz (EFV) to evaluate the efficiency of co-administration of LPV/RTV and EFV in Japanese patients enrolled in a clinical study. The monitoring of LPV plasma concentration is important because co-administration of LPV/RTV with EFV sometimes decreases plasma concentrations of LPV caused by EFV activation of cytochrome P-450 3A. A solution of acetonitrile, methanol and tetramethylammonium perchlorate (TMAP) in dilute aqueous trifluoroacetic acid (TFA) has been used as the mobile phase in a HPLC method to elute LPV and RTV. We found that a solvent ratio of 45 : 5 : 50 (v/v/v) of acetonitrile/methanol/0.02 M TMAP in 0.2% TFA optimized separation of LPV, RTV and EFV. A column temperature of 30 degrees C was necessary for the reproducibility of the analyses. Standard curves were linear in the range 0.060 to 24.06 micro g/ml for LPV, 0.010 to 4.16 micro g/ml for RTV, and 0.047 to 37.44 micro g/ml for EFV. Coefficients of variation (CVs) of LPV, RTV and EFV in intraday and interday assays ranged from 1.5 to 4.0%, 2.5 to 16.8% and 1.0 to 7.7%, respectively. Accuracies ranged from 100 to 110%, 101 to 116% and 99 to 106% for LPV, RTV and EFV, respectively. The extraction recoveries were 77-87, 77-83 and 81-91% for LPV, RTV and EFV, respectively.     

Free volume of cyanate resins studied by positron annihilation

The polymerization process of bisphenol-A dicyanate (BADCy) has been studied using a positron-annihilation lifetime technique (PAL). The polymerization was conducted at 150°C, and the process was followed by PAL. Seven kinds of samples with different curing times were also formed at 150°C, and the relation between the period of the curing time and the degree of polymerization was studied. It has been shown that theo-Ps lifetime increases in samples with a higher polymerization than 85%, which is consistent with measurements of the specific volume of BADCy.     

One-Handed Helical Polyacetylenes Bearing Axially-Chiral 2-Arylpyridyl-N-Oxide Units for Efficient Chromatographic Enantioseparation of Chiral Aromatic and Aliphatic Alcohols

A series of poly(biarylylacetylene)s (PBAs) bearing axially-chiral (S)-and (R)-pyridyl-N-oxide residues with a methoxy, propoxy, or acetyloxy substituent at the 3-position of the biaryl units was synthesized. All the PBAs formed a preferred-handed helix, while the helical sense preference was varied depending on the substituents despite the same twist-sense of the biaryl units. Among them, the propoxy-bound helical PBA showed an exceptionally high chiral recognition ability as a chiral stationary phase (CSP) for high-performance liquid chromatography (HPLC) and efficiently resolved not only various chiral aromatic alcohols, but also a variety of chiral aliphatic alcohols; the latter still remains difficult to resolve by commercially-available CSPs in HPLC. Such practically-useful both handed helical PBA-based CSPs can be produced from the racemic PBA composed of fully racemic monomer units through deracemization of the biaryl units with a chiral alcohol.     

Phase separation and domain structure of iron-based ordering alloys

The process of ordering with phase separation and domain structure of Fe-Al and Fe-Ga alloys in the regions of mixed phases A2 + B2 and A2 + DO₃ have been investigated by transmission electron microscopy. Observation by dark field micrographs with superlattice reflections revealed a complicated process of phase separation strongly depending on alloy composition and temperature, which was in good agreement with thermodynamics based on Landau's phenomenological theory.     

Interaction of three pradimicin derivatives with divalent cations in aqueous solution

This study focused on further analysis of the aggregation behavior of pradimicin derivatives and their interaction with cations in aqueous solution. BMY was compared with two other pradimicin antibiotics (T2 and FB) with the same aglycone moiety but consisting of different substitute groups. The surface tension measurement showed a clear critical micelle concentration at 1-2 mM of the BMY aqueous solution. The role of Zn2+ in replacing the Ca2+ was examined using 1H nuclear magnetic resonance (NMR) method. From changes in the NMR spectrum and precipitability, it was concluded that zinc ion has lower affinity and higher precipitating ability to BMY than the divalent cations of alkaline earth metal. The aggregation behavior of T2 and FB in aqueous solution was also studied using NMR method. The results suggest that the supramolecular behavior of T2 is similar to BMY whether or not Ca2+ ions are present in solution and that there are two binding sites for calcium ions in a T2 molecule. Unlike BMY and T2, the NMR spectrum of FB does not show distinct change upon Ca2+ addition. The interaction of pradimicin antibiotics with divalent metal ions was thought to be related to ionic electronegativity and to the amphoteric property of the antibiotics.     

Test method for the presence or absence of Pb in electrical components using energy-dispersive micro X-ray fluorescence.

The micro-EDXRF (energy dispersive X-ray fluorescence) method was applied to the screening of Pb in micrometer-area samples, such as a Cu contact in electrical components that had been coated by Pb-free Sn-Ag-Cu solder. The reliability of the screening method was evaluated by a comparison with a scanning electron microscope (SEM) observation and a precious chemical analysis method of inductively coupled plasma mass spectrometry (ICP-MS). Some factors that affect the testing reliability, such as the thickness of the solder, the segregation of Pb and Ag, etc. were found by SEM observations. By adjusting some calculation parameters, screening of the micrometer area (0.1 mm) was performed using the fundamental parameter (FP) method for a thin film in conjunction with micro-EDXRF. The measurement error ranged by 25% for the thin film-FP method. The resulted detection limit was 0.04 wt% for Pb, depending on the solder thickness. This method can be successively applied for quality control to check the purity of a Pb-free Sn-Ag-Cu solder coating in electrical components.