Surface modification and wear test of carbon steel by plasma electrolytic nitrocarburizing

Plasma electrolytic nitrocarburizing (PEN/C) was applied to the surface of carbon steel under the boiling condition of saturated urea electrolyte. In addition to the general effect of the bath temperature, different applied voltages and processing times were also considered in this new process. Optical and scanning electron microscopy, X‐ray diffraction, microhardness and pin‐on‐disc wear tests were used to characterize the PEN/C‐treated surfaces. A mixture of θ‐(Fe₃C) and ε‐(Fe_2–3N) was found in the compound layers. At certain conditions, dense surface layers with minimum porosity were observed at the top of the samples. The boiling condition resulted in special character of the compound layers on the surface. The layers consisted of some irregularities grown inward the samples andaffected the characteristics of the surface layers. The microhardness of the PEN/C‐treated layers increased up to 1280 HV0.1, which was 3 to 4 times higher than that for untreated material and higher than that obtained by other investigators (750 HV0.1). PEN/C decreased the wear loss of carbon steel significantly due to the change of the adhesive wear of untreated material to the abrasive mode of treated surfaces. The major advantage of this technique was a higher growth rate of the nitrocarburized layers and a more significant improvement in the tribological performance of the treated samples if compared to similarly oriented surface treatments. Copyright © 2011 John Wiley & Sons, Ltd.     

Direct Synthesis of PbO Nanoparticles From a Lead(II) Nano Coordination Polymer Precursor: Synthesis,Crystal Structure,and DFT Calculations of [Pb2(dmp)2(μ‐N3)2(μ‐ClO4)2]n with the First Pb2‐(μ‐ClO4)2 Unit

Nanostructures of a new coordination polymer of divalent lead with the ligand 2, 9‐dimethyl‐1, 10‐phenanthroline (dmp) containing the first Pb₂‐(μ‐ClO₄)₂ motif, [Pb₂(dmp)₂(μ‐N₃)₂(μ‐ClO₄)₂]_n ( 1 ), was synthesized by a sonochemical method that produces the coordination polymers at nano size. The new nanostructure was characterized by scanning electron microscopy, X‐ray powder diffraction, IR, ¹H NMR and ¹³C NMR spectroscopy, and elemental analysis. Compound 1 was structurally characterized by single‐crystal X‐ray diffraction and the single‐crystal X‐ray data shows that the coordination number of Pb^II ions is six, (PbN₄O₂), with two N‐donor atoms from aza‐aromatic base ligands and four O‐donors from two perchlorate anions and two N‐donors from two azide anions. It has a “stereo‐chemically active” electron lone pair, and the coordination sphere is hemidirected. The supramolecular features in these complexes are guided and controlled by weak directional intermolecular interactions. The chains interact with each other through π–π stacking interactions creating a 3D framework. The structure of the title complex was optimized by density functional theory calculations. Calculated structural parameters and IR spectra for the title complex are in agreement with the crystal structure. The PbO nanoparticles were obtained by thermolysis of 1 at 180 °C with oleic acid as a surfactant. The average diameter of the nanoparticles was estimated by the Scherrer equation to be 23 nm. The morphology and size of the prepared PbO samples were further observed using SEM.     

Microwave‐assisted synthesis of 1‐hydrazinophosphonates via the reaction of aldazines with dialkyl phosphite

A simple, efficient, and novel method has been developed for the synthesis of 1‐hydrazinophosphonic acids from aldazines. As described below, treatment of aldazines with diethyl phosphite gives the corresponding 1‐hydrazinophosphonic acids in good yields. The reaction proceeds under microwave irradiation at 110°C and neutral condition without any additives such as base, acid, or catalyst. This method is easy, rapid, and gives good yields for the 1‐hydrazinophosphonic acids. © 2012 Wiley Periodicals, Inc. Heteroatom Chem 23:304–308, 2012; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.21019     

Rheology of pulp suspensions using ultrasonic Doppler velocimetry

Conventional rheometry coupled with local velocity measurements (ultrasonic Doppler velocimetry) are used to study the flow behaviour of various commercial pulp fibre suspensions at fibre mass concentrations ranging from 1 to 5 wt.%. Experimental data obtained using a stress-controlled rheometer by implementing a vane in large cup geometry exhibits apparent yield stress values which are lower than those predicted before mainly due to existence of apparent slip. Pulp suspensions exhibit shear-thinning behaviour up to a high shear rate value after which Newtonian behaviour prevails. Local velocity measurements prove the existence of significant wall slippage at the vane surface. The velocimetry technique is also used to study the influence of pH and lignin content on the flow behaviour of pulp suspensions. The Herschel–Bulkley constitutive equation is used to fit the local steady-state velocity profiles and to predict the steady-state flow curves obtained by conventional rheometry. Consistency between the various sets of data is found for all suspensions studied, including apparent yield stress, apparent wall slip and complete flow curves.     

Synthesis of a Photoaffinity‐Labeled (11Z)‐Retinal: Identification of Retinal/Rhodopsin Cross‐Linked Sites along the Visual‐Transduction Path

The retinal chromophore (11Z)‐3‐diazo‐4‐oxoretinal ( 1 ) with two photo‐labile moieties has been synthesized by semi‐hydrogenation of an 11‐yne precursor with activated Zn in aqueous media. Incorporation of 1 into opsin yielded diazoketo rhodopsin (DK‐Rh), which, upon bleaching, gave rise to intermediates batho‐Rh, lumi‐Rh, meta‐Rh, and meta‐II‐Rh corresponding to those of native Rh but at lower temperatures. Photoaffinity labeling of DK‐Rh and these bleaching intermediates showed that the ionone ring cross‐linked to Trp265 of helix F in DK‐Rh and batho intermediate, and to Ala169 of helix D in lumi, meta‐I, and meta‐II intermediates. These results demonstrate the occurrence of large conformational changes along the visual transduction path, which, in turn, is responsible for activation of the G‐protein.     

Microwave-assisted synthesis of α-aminophosphinic acids from hypophosphorus acid salts under solvent free conditions

A simple, efficient, and general method has been developed for the synthesis of α-aminophosphinic acids from hypophosphorus salts under solvent-free conditions using microwave irradiation. α-Aminophosphinic acids were obtained in high yield under mild conditions by reaction of the amine salts of hypophosphorus acid with aldehydes in the presence of microwave irradiation.     

Fourier Series Representation of Low-Lying Eigenfunctions for a Particle on the Torus

A Fourier series method for finding the low-lying eigenfunctions and eigenvalues of the Schrödinger equation for a particle on the surface of a torus is given.     

Intensification of gadolinium(III) separation by effective utilization of nanoliquids in supported liquid membrane using Aliquat 336 as carrier

A supported nanoliquid membrane was developed to improve the separation of rare metal ion gadolinium (Gd) from nitrate solution medium. The nanoliquid membrane was prepared by dispersion of nanoparticles in organic phase and Aliquat 336 was applied as the carrier. TiO₂ and SiO₂ as hydrophobic and hydrophilic nanoparticles were effectively incorporated in the supported liquid membrane (SLM) system and the effect of size, concentration, and type of nanoparticle in the SLM were evaluated. A membrane phase of 0.015 M Aliquat-336 in kerosene and 0.04 wt% of SiO₂ with the size of 15 nm was found to have the highest permeability coefficient of 12.57?×?10^?5 m/s and enhanced the permeability coefficient by 28.2%. Hydrophobicity and hydrophilicity of the nanoparticles were observed to have remarkable effects on the permeation of the SLM system and concluded that the hydrophobic nanoparticle was more desirable. Results showed that the solid supported pore’s blockage and aggregation of nanoparticles could bring adverse effects at a high nanoparticle concentration at this SLM configuration. The stability tests were conducted over ten cycles of separation and the supported nanoliquid membrane had slight reduction of permeation during the test.     

MoS2‐on‐MXene Heterostructures as Highly Reversible Anode Materials for Lithium‐Ion Batteries

Two‐dimensional (2D) heterostructured materials, combining the collective advantages of individual building blocks and synergistic properties, have spurred great interest as a new paradigm in materials science. The family of 2D transition‐metal carbides and nitrides, MXenes, has emerged as an attractive platform to construct functional materials with enhanced performance for diverse applications. Here, we synthesized 2D MoS₂‐on‐MXene heterostructures through in situ sulfidation of Mo₂TiC₂T_x MXene. The computational results show that MoS₂‐on‐MXene heterostructures have metallic properties. Moreover, the presence of MXene leads to enhanced Li and Li₂S adsorption during the intercalation and conversion reactions. These characteristics render the as‐prepared MoS₂‐on‐MXene heterostructures stable Li‐ion storage performance. This work paves the way to use MXene to construct 2D heterostructures for energy storage applications.