Analysis of major milk whey proteins by immunoaffinity capillary electrophoresis coupled with MALDI-MS

Two major milk whey proteins, β-lactoglobulin and α-lactalbumin, are among the main cow milk allergens and can cause allergy even at a very low concentrations. Therefore, these proteins are interesting targets in food analysis, not only for food quality control but also for highlighting the presence of allergens. Herein, a sensitive analysis for β-lactoglobulin and α-lactalbumin was developed using immunoaffinity capillary electrophoresis hyphenated with MALDI-MS. Magnetic beads functionalized with appropriate antibodies were used for β-lactoglobulin and α-lactalbumin immunocapture inside the capillary. After elution from the beads, analyte focusing and separation were performed by transient isotachophoresis followed by MALDI-MS analysis performed through an automated iontophoretic fraction collection interface. A LOD in the low nanomolar range was attained for both whey proteins. The method developed was further applied to the analysis of different milk samples including fortified soy milk.     

Joint employee weekly timetabling and daily rostering: A decision-support tool for a logistics platform

To deal with their highly variable workload, logistics companies make their task force flexible using multi-skilled employees, flexible working hours or short-term contracts. Together with the legal constraints and the handling equipments’ capacities, these possibilities make personnel scheduling a complex task. This paper describes a model to support their chain of decisions from the weekly timetabling to the daily rostering (detailed task allocation).     

12-Hydroxystearic acid lipid tubes under various experimental conditions

There is a growing interest for constructing supramolecular hollow tubes from amphiphilic molecules. Aqueous solutions of the ethanolamine salt of 12-hydroxystearic acid are known to form tubes of several tens of micrometers in length with a temperature-tunable diameter. However, the phase behavior of this system has not been fully studied. Herein, we report the variation of various physico-chemical parameters on the self-assembling properties of this system. The effects of the ionic strength, ethanol, doping with other lipids, pH, concentration, and the fatty acid/ethanolamine molar ratio R were investigated by both phase-contrast microscopy and DSC. We observed the formation of tubes in a wide range of parameters. For instance, the molar ratio R can be modified from 2/3 to 5/2 without altering the formation of tubes. In some but not all cases, the tube diameter still varied with temperature. These findings show that tubes form under various experimental conditions. This should increase the interest in producing such self-assemblies from low-cost fatty acids.     

Influence of semi-batch operation on the precipitation of natrojarosite particles from sulfate solutions

The precipitation of natrojarosite from iron sodium sulfate solutions has been investigated at temperatures close to the atmospheric boiling point, in batch and semi-batch conditions. Semi-batch conditions make it possible to maintain a weaker iron concentration in the stirred reactor, leading to lower supersaturations, closer to those in continuous and possibly seeded MSMPRs or tanks—in series units. In these reactors, primary and secondary nucleations are few, allowing the growth of pure mono-crystalline particles of controlled size and size dispersion. Both modi operandi lead to agglomerates made of crystals of cubic habit. The surface of cauliflower-like particles from the batch modus operandi displays overlaying crystals, of size between 100 and 400 nm. The particles from the semi-batch mode, with moderate iron addition, are rougher and show bigger intergrown constitutive crystals of size up to a few microns, which denotes lesser secondary nucleation and more growth. A model is developed to characterize iron(III) and sulfate speciation with non-ideal behavior in the mother solution. It is used to compare the variations of supersaturation in the reactor between the batch and the semi-batch conditions. During the first 500 min, the supersaturation resulting from a moderate addition of iron is 10,000–10 times lower than during batch kinetics, which agrees with the reduction of secondary nucleation suggested by scanning electron micrographs. The semi-batch technique, which can be combined with the addition of support particles, is worth further work, aiming to reduce secondary nucleation and to determine the crystallite growth rate expression of natrojarosite as a function of supersaturation, using the model of solution developed in this work.     

Tuning anisotropy barriers in a family of tetrairon(III) single-molecule magnets with an S = 5 ground state

Tetrairon(III) Single-Molecule Magnets (SMMs) with a propeller-like structure exhibit tuneable magnetic anisotropy barriers in both height and shape. The clusters [Fe4(L1)2(dpm)6] (1), [Fe4(L2)2(dpm)6] (2), [Fe4(L3)2(dpm)6].Et2O (3.Et2O), and [Fe4(OEt)3(L4)(dpm)6] (4) have been prepared by reaction of [Fe4(OMe)6(dpm)6] (5) with tripodal ligands R-C(CH2OH)3 (H3L1, R = Me; H3L2, R = CH2Br; H3L3, R = Ph; H3L4, R = tBu; Hdpm = dipivaloylmethane). The iron(III) ions exhibit a centered-triangular topology and are linked by six alkoxo bridges, which propagate antiferromagnetic interactions resulting in an S = 5 ground spin state. Single crystals of 4 reproducibly contain at least two geometric isomers. From high-frequency EPR studies, the axial zero-field splitting parameter (D) is invariably negative, as found in 5 (D = -0.21 cm(-1)) and amounts to -0.445 cm(-1) in 1, -0.432 cm(-1) in 2, -0.42 cm(-1) in 3.Et2O, and -0.27 cm(-1) in 4 (dominant isomer). The anisotropy barrier Ueff determined by AC magnetic susceptibility measurements is Ueff/kB = 17.0 K in 1, 16.6 K in 2, 15.6 K in 3.Et2O, 5.95 K in 4, and 3.5 K in 5. Both |D| and U(eff) are found to increase with increasing helical pitch of the Fe(O2Fe)3 core. The fourth-order longitudinal anisotropy parameter B4(0), which affects the shape of the anisotropy barrier, concomitantly changes from positive in 1 ("compressed parabola") to negative in 5 ("stretched parabola"). With the aid of spin Hamiltonian calculations the observed trends have been attributed to fine modulation of single-ion anisotropies induced by a change of helical pitch.     

Magnetic anisotropy of two trinuclear and tetranuclear Cr(III)Ni(II) cyanide-bridged complexes with spin ground states S = 4 and 5

The trinuclear and the tetranuclear complexes [[iPrtacnCr(CN)3]2[Ni(cyclam)]](NO3)2.5H2O 1 (cyclam = 1,4,8,11-tetraazacyclotetradecane, iPrtacn = 1,4,7-tris-isopropyl-1,4,7-triazacyclononane) and [[iPrtacnCr(CN)3Ni(Me2bpy)2]2](ClO4)4.2CH3CN 2 (Me2bpy = 4,4-dimethyl-2,2-bipyridine) were synthesized by reacting (iPrtacn)Cr(CN)3 with [Ni(cyclam)](NO3)2 and [Ni(Me2bpy)2(H2O)2](ClO4)2, respectively. The crystallographic structure of the two compounds was solved. The molecular structure of complex 1 consists of a linear Cr-Ni-Cr arrangement with a central Ni(cyclam) unit surrounded by two Cr(iPrtacn)(CN)3 molecules through bridging cyanides. Each peripheral chromium complex has two pending CN ligands. Complex 2 has a square planar arrangement with the metal ions occupying the vertices of the square. Each Cr(iPrtacn)(CN)3 molecule has two bridging and one non-bridging cyanide ligands. The magnetic properties of the two complexes were investigated by susceptibility vs. temperature and magnetization vs. field studies. As expected from the orthogonality of the magnetic orbitals between Cr(III) (t2g3) and Ni(II) (e(g)2) metal ions, a ferromagnetic exchange interaction occurs leading to a spin ground states S = 4 and 5 for 1 and 2, respectively. The magnetization vs. field studies at T = 2, 3 and 4 K showed the presence of a magnetic anisotropy within the ground spin states leading to zero-field splitting parameters obtained by fitting the data D4 = 0.36 cm(-1) and D5 = 0.19 cm(-1) (the indices 4 and 5 refer to the ground states of complexes 1 and 2, respectively). In order to quantify precisely the magnitude of the axial (D) and the rhombic (E) anisotropy parameters, High-field high frequency electron paramagnetic resonance (HF-HFEPR) experiments were carried out. The best simulation of the experimental spectra (at 190 and 285 GHz) gave the following parameters for 1: D4 = 0.312 cm(-1), E4/D4 = 0.01, g4x = 2.003, g4y = 2.017 and g4z = 2.015. For complex 2 two sets of parameters could be extracted from the EPR spectra because a doubling of the resonances were observed and assigned to the presence of complexes with slightly different structures at low temperature: D5 = 0.154 (0.13) cm(-1), E5/D5 = 0.31 (0.31) cm(-1), g4x = 2.04 (2.05), g4y = 2.05 (2.05) and g4z = 2.03 (2.02). The knowledge of the magnetic anisotropy parameters of the mononuclear Cr(iPrtacn)(CN)3, Ni(cyclam)(NCS)2 and Ni(bpy)2(NCS)2 complexes by combining HF-HFEPR studies and calculation using a software based on the angular overlap model (AOM) allowed to determine the orientation of the local D tensors of the metal ions forming the polynuclear complexes. We, subsequently, show that the anisotropy parameters of the polynuclear complexes computed from the projection of the local tensors are in excellent agreement with the experimental ones extracted from the EPR experiments.     

New Cavity Design for Broad-Band Quasi-Optical HF-EPR Spectroscopy

The design and performance of two new devices adapted for high-frequency electron paramagnetic resonance (HF-EPR) in a broad frequency range are described. Both systems, a Fabry–Pérot resonator and a rotating sample holder, rely on similar construction schemes and on the use of submicrometer piezoelectric positioners. A study of a single crystal of graphite allows illustrating the operation of these two new systems associated with our quasi-optical HF-EPR spectrometer.     

Self-diffusion coefficient measurements at high temperature by PFG NMR

We have developed a new experimental setup for the measurement of self-diffusion coefficients at high temperature (up to 1500 K) in corrosive liquids. It is based on pulsed field gradient NMR using a 10 mm liquid probe with two channels F-H/X modified and coupled with laser heating. The values obtained thanks to this setup are in good agreement with the available data obtained using the reference method, i.e., the capillary method. We present here results on ¹⁹F, ⁷Li, ²³Na, ²⁷Al in molten fluorides. In alkali fluoride mixtures, the self-diffusion coefficients depend weakly on the composition (nature and concentration of the different alkali) but mainly on temperature. In cryolite (Na₃AlF₆), the diffusion evidences AlF_x^3 ? x species.     

Asymptotic Analysis of Shell-like Inclusions with High Rigidity

We study the problem of an elastic shell-like inclusion with high rigidity in a three-dimensional domain by means of the asymptotic expansion method. The analysis is carried out in a general framework of curvilinear coordinates. After defining a small real adimensional parameter ε, we characterize the limit problems when the rigidity of the inclusion has order of magnitude \frac1e\frac{1}{\varepsilon } and \frac1e³\frac{1}{\varepsilon^{3}} with respect to the rigidities of the surrounding bodies. Moreover, we prove the strong convergence of the solution of the initial three-dimensional problem towards the solution of the simplified limit problem.     

Self-assembly, foaming, and emulsifying properties of sodium alkyl carboxylate/guanidine hydrochloride aqueous mixtures

Unsaturated fatty acids may be extracted from various agricultural resources and are widely used as soaps in the industry. However, there also exist a large variety of saturated and hydroxy fatty acids in nature, but their metal salts crystallize at room temperature in water, hampering their use in biological and chemical studies or for industrial applications. Addition of guanidine hydrochloride (GuHCl) to sodium salt of myristic acid has been shown to prevent its crystallization in water, forming stable flat bilayers at room temperature. Herein, we extend this finding to two other saturated fatty acids (palmitic and stearic acids) and two hydroxyl fatty acids (juniperic and 12 hydroxy stearic acids) and study more deeply (by using small angle neutron scattering) the supramolecular assemblies formed in both saturated and hydroxyl fatty acid systems. In addition, we take the advantage that crystallization no longer occurs at room temperature in the presence of GuHCl to study the foaming and emulsifying properties of those fatty acid dispersions. Briefly, our results show that all fatty acids, even juniperic acid, which is a bola lipid, are arranged in a bilayer structure that may be interdigitated. Depending on the nature of the fatty acid, the systems exhibit good foamability and foam stability (except for juniperic acid), and emulsion stability was good. Those findings should be of interest for using saturated long chain (and hydroxyl) fatty acids as surfactants for detergency or even materials chemistry.