In Appreciation¶A Lifetime of Connections: Otto Herbert Schmitt, 1913 - 1998

Otto H. Schmitt was born in St. Louis, Missouri, in 1913. As a youth, he displayed an affinity for electrical engineering but also pursued a wide range of other interests. He applied his multi-disciplinary talents as an undergraduate and graduate student at Washington University, where he worked in three departments: physics, zoology, and mathematics. For his doctoral research, Schmitt designed and built an electronic device to mimic the propagation of action potentials along nerve fibers. His most famous invention, now called the Schmitt trigger, arose from this early research. Schmitt spent most of his career at the University of Minnesota, where he did pioneering work in biophysics and bioengineering. He also worked at national and international levels to place biophysics and bioengineering on sound institutional footings. His years at Minnesota were interrupted by World War II. During that conflict - and the initial months of the Cold War to follow - Schmitt carried out defense-related research at the Airborne Instruments Laboratory in New York. Toward the end of his career at Minnesota, Schmitt coined the term biomimetics. He died in 1998. RID="*" ID="*"Jon M. Harkness received his Ph.D. degree in the history of science from the University of Wisconsin in 1996. During the spring of 2002, he is an adjunct assistant professor of the history of medicine at the University of Minnesota.     

Pinched inlet gravitational split-flow thin fractionation of airborne particles and analysis of size dependent level of PCDD/Fs

Fine particles in air have a direct influence on human health because they carry toxic chemicals that can be deposited in the human lung when inhaled. Thus, particle size distribution and size dependent level of contamination of the airborne particles are important parameters for the study and assessment of environmental pollution. In this study, gravitational split-flow thin (SPLITT) fractionation (or GSF), a semi-preparative scale separation technique for particles, was applied for the continuous size sorting of airborne particles collected in urban area. About 2.0 g of airborne particles was fractionated into four different size intervals (<1.5, 1.5-2.5, 2.5-5.0, and >5.0 microm), and the collected fractions were examined by electron microscopy for particle size distribution and analyzed for the size dependent levels of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs). It was found that more than 60% of particles including dissolved matters in weight were smaller than 5.0 microm and they contained more than 86% of the total PCDD/Fs amount in airborne particles.     

Hydrogen peroxide-sodium hydrosulfite chemiluminescence system combined with high-performance liquid chromatography for determination of 1-hydroxypyrene in airborne particulates

In this research, a highly sensitive chemiluminescence method based on a sodium hydrosulfite (NaHSO₃)-hydrogen peroxide (H₂O₂) reaction for the determination of 1-hydroxypyrene (1-OHP) was developed. The response of this system was linear in the range from 0.5 to 50 pmol (R² = 0.9983). The limit of detection for 1-OHP was 100 fmol (S/N = 3). 1-OHP in airborne particulates was well separated from interfering compounds using an ODS column with 75% methanol as the mobile phase in isocratic mode. The proposed method was successfully applied to determine the 1-OHP in airborne particulates collected in Kanazawa, Japan. The average concentration of 1-OHP in the atmosphere was 2.0 pg/m³ (9.2 fmol/m³).     

Multi-element analysis of airborne particulate matter by various spectrometric methods after microwave digestion

A microwave digestion procedure in combination of the measurement of various spectrometric methods including atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry was developed for the multi-element analysis of airborne particulate matter collected on PTFE filters by a dichotomous sampler. In order to achieve more sensitive and rapid multi-element analyses, special PTFE-lined digestion vessels were used. It was found that complete digestion of airborne particulates with an acid mixture of HNO₃-HClO₄-HF (3:7:1, v/v) can be achieved in the microwave-irradiated closed vessel system and direct spectroscopic measurement of the digested sample after appropriate dilution. A recovery study was conducted using a multi-element standard and NIST Standard Reference Material 1648 Urban Particulate. Sixteen major, minor, and trace elements in airborne particulate matter were determined.     

Determination of mercury in airborne particulate matter collected on glass fiber filters using high-resolution continuum source graphite furnace atomic absorption spectrometry and direct solid sampling

A study has been undertaken to assess the capability of high-resolution continuum source graphite furnace atomic absorption spectrometry for the determination of mercury in airborne particulate matter (APM) collected on glass fiber filters using direct solid sampling. The main Hg absorption line at 253.652 nm was used for all determinations. The certified reference material NIST SRM 1648 (Urban Particulate Matter) was used to check the accuracy of the method, and good agreement was obtained between published and determined values. The characteristic mass was 22 pg Hg. The limit of detection (3σ), based on ten atomizations of an unexposed filter, was 40 ng g^− 1, corresponding to 0.12 ng m^− 3 in the air for a typical air volume of 1440 m³ collected within 24 h. The limit of quantification was 150 ng g⁻¹, equivalent to 0.41 ng m⁻³ in the air. The repeatability of measurements was better than 17% RSD (n = 5). Mercury concentrations found in filter samples loaded with APM collected in Buenos Aires, Argentina, were between < 40 ng g⁻¹ and 381 ± 24 ng g⁻¹. These values correspond to a mercury concentration in the air between < 0.12 ng m⁻³ and 1.47 ± 0.09 ng m⁻³. The proposed procedure was found to be simple, fast and reliable, and suitable as a screening procedure for the determination of mercury in APM samples.     

Microwave assisted sample preparation for determining water-soluble fraction of trace elements in urban airborne particulate matter: evaluation of bioavailability

The feasibility of using two different microwave-based sample preparation methods was investigated to determine the total and water-soluble trace metal fraction in airborne particulate matter. The extraction techniques were then applied to urban particulate matter of different sizes in order to evaluate their bioavailability of associated trace metals. While a combination of HNO₃-HF-H₂O₂ was used for the total trace metal fraction of particulate matter, water was employed for the microwave-assisted extraction of water-soluble trace metal fractions. Inductively coupled plasma-mass spectrometry (ICP-MS) was used for the analysis of trace elements. The experimental protocol for the microwave assisted digestion was established using two different SRMs (1648, urban particulate matter and 1649a, urban dust). In the case of water-soluble trace metal fraction, the quantities extracted from the SRMs were compared between ultrasonic and microwave-assisted extractions, and there was a good agreement between the two extraction methods. Blanks values and limits of detection (LODs) for total and water-soluble trace metal concentrations were determined for three different filter substrates (Teflon, Zeflour, and Quartz). Subsequently, the proposed digestion method was evaluated for its extraction efficiency with these filter substrates. Finally, the real-world application of the proposed microwave-based sample preparation methods was demonstrated by analyzing trace elements in airborne particulate samples collected from different outdoor environments in Singapore. The solubility of 11 trace elements detected in the particulate samples is quantified.     

Enhancement of convective drying by application of airborne ultrasound – A response surface approach

Drying is one of the oldest and most commonly used processes in the food manufacturing industry. The conventional way of drying is by forced convection at elevated temperatures. However, this process step often requires a very long treatment time, is highly energy consuming and detrimental to the product quality. Therefore, an investigation of whether the drying time and temperature can be reduced with the assistance of an airborne ultrasound intervention is of interest.Previous studies have shown that contact ultrasound can accelerate the drying process. It is assumed that mechanical vibrations, creating micro channels in the food matrix or keeping these channels from collapsing upon drying, are responsible for the faster water removal. In food samples, due to their natural origin, drying is also influenced by fluctuations in tissue structure, varying between different trials. For this reason, a model food system with thermo-physical properties and composition (water, cellulose, starch, fructose) similar to those of plant-based foods has been used in this study.The main objective was, therefore, to investigate the influence of airborne ultrasound conditions on the drying behaviour of the model food. The impact of airborne ultrasound at various power levels, drying temperature, relative humidity of the drying air, and the air speed was analysed. To examine possible interactions between these parameters, the experiments were designed with a Response Surface Method using Minitab 16 Statistical Software (Minitab Inc., State College, PA, USA). In addition, a first attempt at improving the process conditions and performance for better suitability and applicability in industrial scale processing was undertaken by non-continuous/intermittent sonication.     

新一代ARINC429总线监听模块设计技术

在飞行试验中,机载ARINC429总线往往包含重要的试飞数据,采集ARINC429总线是试飞测试系统中重要的一环。以往的ARINC429总线采集技术,一般采用分离元器件构成,造成电路体积大、功耗大,可靠性降低。在新一代网络化采集器创新性预研背景下,提出了一种基于DSP和FPGA架构的通用设计方案,FPGA进行总线协议解析,DSP进行数据的筛选,充分发挥出FPGA的并行优势和DSP的灵活特性。同时,设计了数据采样和传递机制,并在实际工程中得到应用。     

AEDAL在青岛、渤海及黄海探测的定标反演

在不进行大气参数假设和加载其他辅助设备的情况下,通过对AEDAL机载大气环境探测激光雷达探测数据的分析,证明了用Slope法对空基激光雷达进行定标反演的可行性。AEDAL的定标反演结果,生动地展现了青岛地区及渤海、黄海海域气溶胶垂直分布、边界层结构及边界层光学厚度的重要特征。首先,冷锋过境,边界层高度明显下降的同时,气溶胶出现多层分布的现象,海区气溶胶垂直分布较陆地有明显的沉降现象。其次,青岛地区整个边界层光学厚度表现为城区最大、丘陵地区最小、渤海海区介于两者之间的分布特点,海区边界层光学厚度变化相对平缓,迎风坡附近的边界层光学厚度较周围有所增大。青岛至渤海这一区域,晴朗天气下边界层光学厚度的大小介于0.15～0.35之间,雾天则在0.3～0.45之间,而黄海海域则可达到0.55左右。这说明,青岛地区边界层气溶胶主要来自于城市和海洋,在冬季季风对气溶胶分布起作用的同时,山脉及地面风场对边界层气溶胶的输送有重要影响。