二次锂电池正极材料LixNi0.3Co0.7O2的XPS与XRD研究

结果表明，ＬｉｘＮｉ０．３Ｃｏ０．７Ｏ２具有六方晶系Ｒ３＾－ｍ空间群结构。当Ｘ－１，０．３１５时，其晶胞参数分别为ａ＝２．８２６ｎｍ，ｃ＝１４．１３０ｎｍ和ａ＝０．２８０８ｎｍ，ｃ＝１．４２５３ｎｍ；ＭＯ６（Ｍ＝Ｎｉ，Ｃｏ）八面体中Ｍ－Ｏ平均距离分别为０。１９４１ｎｍ和０．１９３３ｎｍ。ＸＰＳ分析结果表明ＬＩｘＮｉ０．３ＣＯ０．７Ｏ２表面存在Ｌｉ２Ｏ，同时探讨了其中过渡金属离子的３ｄ电子结构变化。     

Modification of Absorption of a Bulk Material by Photonic Crystals

We show theoretically that it is possible to modify absorption of a bulk absorbing material by inserting another non-absorbing dielectric slab periodically to form one-dimensional photonic crystals.It is found that,for frequencies within photonic bandgaps,absorption is always suppressed.For frequencies located at photonic bands,absorption can be suppressed or enhanced,which depends on the relative values of the real refractive index of the absorbing and non-absorbing dielectric layers.     

Fluorescence Microscopy of Nanoscale Silver Oxide Thin Films

The experimental conditions for photoactivated intermittent fluorescence from nanoscale silver oxide were studied with fluorescence microscopy.Strong fluorescence was observed from the Ag2O particles with size of 10-20nm excited with both blue and green light .We observed the saturation of Photoexcitation with blue light and explained the experimental results using the model of agglomeration of silver atoms to form small clusters and the fluorescence of Ag2 and Ag3 clusters.     

像增强器用中波红外辐射可激励的新型荧光材料

1 引言目前,许多研究都集中于研制各种用途的中波红外成像系统。这些应用从工业用热成像一直扩展到探测车辆、导弹等的军用热成像。可反映中波红外成像目前技术水平的是加工碲镉汞、锑化铟等半导体探测器的线阵或面阵,并把它们组装到一适当光学成像系统。但是,材料和器件的产额低,这种器件不仅制作难而且成本高。本文介绍一种加工成本低用于中波红外成像的新型探测介质,具体地讲,这种新介质是一种可将中波红外     

POROSITY CALCULATION OFMIXTURES OF FIBROUS PARTICLES

The initial forming of fiber blend to high green density, i.e. the packing of fibrous particles, is important to the reinforcement of composite materials. It is very useful to develop a general predictive method for the optimum selection of particle mixtures for the property control of ceramic or composite products. This paper presents such a mathematical model developed on the basis of the similarity analysis between the spherical and non-spherical particle packings and assesses its applicability to the packing of fibrous particles with discrete and/or continuous length distributions. The results indicate that the model can predict this packing system well and hence provide an effective way to solve various packing problems in the composite materials processing.     

Cr^4＋：YAG可饱和吸收特性测量

测量了Cr4+:YAG材料的可饱和吸收特性,用多种数据分析方法处理了实验结果,Cr4+:YAG的基态吸收截面σgs=11×10-19cm2,激发态吸收截面σes=1.2×10-19cm2。     

Ⅱ型平面动力裂纹线场的弹塑性精确解

本采用线场分析方法对理想弹塑性Ⅱ型平面应力裂纹裂纹线附近的应力场及弹塑性边界进行了精确分析，本完全放弃了小范围屈服条件，探讨了弹塑性边界上弹塑性应力场匹配条件的正确提法，通过将裂纹线附近塑性区应力场的通解（而不是过去采用的特解）与弹性应力场的精确解（而不是通常的裂尖应力强度因子Ｋ场）在裂纹线附近的弹塑性边界上匹配，本得出了塑性区应力场，塑性区长度及弹塑性边界的单位法向量在裂纹线附近的足够精确