对位叠式循环方波伏安法：Ⅱ.平行催化体系

本文提出平行催化体系的对位叠式循环方波伏安法，并对共作了系统的研究，推导了这一方法的催化电流理论方程，并用验验证这理论的正确性，得到其各脉冲电流皆为同方向，对位叠式循环催化电流相当于将电流叠加４次，而波形不受方波幅度大小的影响，因而灵敏度和分辨率有较大提高，优于其它方波伏安法。     

Novel aromatic carboxamides from dehydroabietylamine as potential fungicides: Design,synthesis and antifungal evaluation

The present study was carried out to design and synthesize a number of novel aromatic carboxamide derivatives of dehydroabietylamine. The preliminary antifungal assay indicated that most of title compounds displayed moderate to good antifungal activity toward the six fungal strains in vitro. Compounds 3i, 3q, 4b and 4d showed significant antifungal activity against Sclerotinia sclerotiorum, with EC₅₀ values ranging from 0.067 ～ 0.393 mg/L. Compounds 3i, 4b and 4d also showed pronounced mycelial growth inhibition activities against B. cinerea and A. solani. Furthermore, in the in vivo assay, compound 4b exhibited brilliant protective activity against S. sclerotiorum-infected rape leaves. Meanwhile, the in vivo bioassay on tomato plants infected by B. cinerea showed that compound 3i and 4d displayed excellent protective activity at 200 mg/L, which were near to boscalid. Primary mechanistic study revealed that 4b could inhibit sclerotia formation as well as reduce the exopolysaccharide level. SEM and TEM analysis indicated that 4b possessed a strong ability to destroy the surface morphology of mycelia, cell structure and seriously interfere with the growth of the fungal pathogen. In addition, 4b exhibited good inhibitory activity (IC₅₀ = 23.3 ± 1.6 μM) toward succinate dehydrogenase (SDH). Molecular modeling study confirmed the binding modes between compound 4b and SDH. The above antifungal results and fungicidal mechanism study revealed that this class of dehydroabietylamine derivatives could be potential SDH inhibitors and lead compounds for novel fungicides development.     

Electrochemical Behaviour and Square Wave Voltammetry of the Rice Herbicides Molinate,Bensulfuron-Methyl,Mefenacet and Thiobencarb

Abstract

Cyclic, differential pulse and square wave voltammetry were applied to develop an electroanalytical procedure for the determination of a group of herbicides used to treat rice crops: molinate, bensul-ruron-methyl, mefenacet and thiobencarb. The oxidation mechanism causes adsorption problems and consequent poisoning of the electrode surface by the products of the electrochemical reaction. Parameters such as pH, frequency and electrochemical electrode surface treatment were optimized. The analytical methodology developed using square wave voltammetry was applied to the determination of molinate and bensulfuron-methyl in simple or mixed commercial products.     

Validation of a novel very large eddy simulation method for simulation of turbulent separated flow

The paper describes the validation of a newly developed very LES (VLES) method for the simulation of turbulent separated flow. The new VLES method is a unified simulation approach that can change seamlessly from Reynolds‐averaged Navier–Stokes to DNS depending on the numerical resolution. Four complex test cases are selected to validate the performance of the new method, that is, the flow past a square cylinder at Re = 3000 confined in a channel (with a blockage ratio of 20%), the turbulent flow over a circular cylinder at Re = 3900 as well as Re = 140,000, and a turbulent backward‐facing step flow with a thick incoming boundary layer at Re = 40,000. The simulation results are compared with available experimental, LES, and detached eddy simulation‐type results. The new VLES model performs well overall, and the predictions are satisfactory compared with previous experimental and numerical results. It is observed that the new VLES method is quite efficient for the turbulent flow simulations; that is, good predictions can be obtained using a quite coarse mesh compared with the previous LES method. Discussions of the implementation of the present VLES modeling are also conducted on the basis of the simulations of turbulent channel flow up to high Reynolds number of Re_τ = 4000. The efficiency of the present VLES modeling is also observed in the channel flow simulation. From a practical point of view, this new method has considerable potential for more complex turbulent flow simulations at relative high Reynolds numbers. Copyright © 2013 John Wiley & Sons, Ltd.     

Improving the approximation of the probability density function of random nonautonomous logistic‐type differential equations

In this paper, we address the problem of approximating the probability density function of the following random logistic differential equation: P^′(t,ω)=A(t,ω)(1?P(t,ω))P(t,ω), t∈[t₀,T], P(t₀,ω)=P₀(ω), where ω is any outcome in the sample space Ω. In the recent contribution [Cortés, JC, et al. Commun Nonlinear Sci Numer Simulat 2019; 72: 121–138], the authors imposed conditions on the diffusion coefficient A(t) and on the initial condition P₀ to approximate the density function f₁(p,t) of P(t): A(t) is expressed as a Karhunen–Loève expansion with absolutely continuous random coefficients that have certain growth and are independent of the absolutely continuous random variable P₀, and the density of P₀, , is Lipschitz on (0,1). In this article, we tackle the problem in a different manner, by using probability tools that allow the hypotheses to be less restrictive. We only suppose that A(t) is expanded on L²([t₀,T]×Ω), so that we include other expansions such as random power series. We only require absolute continuity for P₀, so that A(t) may be discrete or singular, due to a modified version of the random variable transformation technique. For , only almost everywhere continuity and boundedness on (0,1) are needed. We construct an approximating sequence of density functions in terms of expectations that tends to f₁(p,t) pointwise. Numerical examples illustrate our theoretical results.     

Oxotitanium(IV) complexes of some bis‐unsymmetric Schiff bases: Synthesis,structural elucidation and biomedical applications

A number of oxotitanium(IV) complexes of the type TiOL with bis‐unsymmetric dibasic tetradentate Schiff base (LH₂) containing ONNO donor atoms have been synthesized. Mono‐Schiff base (OPD‐HNP) was prepared by the condensation of 1:3 molar ratio of 2‐hydroxy‐1‐naphthaldehyde (HNP) with o‐phenylenediamine (OPD). Dibasic unsymmetric tetradentate diamine Schiff bases were prepared by the reaction of OPD‐HNP with 2‐hydroxyacetophenone, 2‐hydroxypropeophenone, benzoylacetone, acetylacetone and ethylacetoacetate. Further, titanylacetylacetonate was reacted with these ligands to obtain their metal complexes. On the basis of analytical and physiochemical data, the formation of complexes as TiOL was suggested having square pyramidal geometry. Quantum mechanical approach also confirmed this geometry. The assessment of the synthesized ligands and their complexes showed that some behave as good inhibitors of mycelial growth against selected phytopathogic fungi but weak inhibitors against some selected bacteria. A few of them also showed antioxidant properties.     

Separation of Xylene Isomers in the Anion-Pillared Square Grid Material SIFSIX-1-Cu

Xylene isomer separation is considered one of the seven separation challenges that changed the world. In addition, the high-energy demand of xylene separation highlights the need for efficient novel adsorbents. Herein, the liquid-phase separation potential of the anion-pillared hybrid material SIFSIX-1-Cu was studied for preferential adsorption of o-xylene and m-xylene over p-xylene, which was inspired by a previous complexation crystallization method for separating m-xylene. We report detailed experimental liquid-phase adsorption experiments, yielding selectivities of 3.0 for o-xylene versus p-xylene and 2.6 for m-xylene versus p-xylene. Our theoretical calculations thus provide a reasonable explanation that the xylene adsorption selectivity is attributed to the C−H⋅⋅⋅F interaction, and the host–guest interaction order agrees with the adsorption priority: o-xylene > m-xylene > p-xylene.     

An improved ensemble learning machine for biological activity prediction of tyrosine kinase inhibitors

Boosting is one of the most important strategies in ensemble learning because of its ability to improve the stability and performance of weak learners. It is nonparametric, multivariate, fast and interpretable but is not robust against outliers. To enhance its prediction accuracy as well as immunize it against outliers, a modified version of a boosting algorithm (AdaBoost R2) was developed and called AdaBoost R3. In the sampling step, extremum samples were added to the boosting set. In the robustness step, a modified Huber loss function was applied to overcome the outlier problem. In the output step, a deterministic threshold was used to guarantee that bad predictions do not participate in the final output. The performance of the modified algorithm was investigated with two anticancer data sets of tyrosine kinase inhibitors, and the mechanism of inhibition was studied using the relative weighted variable importance procedure. Investigating the effect of base learner's strength reveals that boosting is only successful using the classification and regression tree method (a weak to moderate learner) and does not have a significant effect using the radial basis functions partial least square method (a strong base learners). Copyright © 2015 John Wiley & Sons, Ltd.     

Muscle oxygenation measurement in humans by noninvasive optical spectroscopy and Locally Weighted Regression

We have developed a method to make real-time, continuous, noninvasive measurements of muscle oxygenation (Mox) from the surface of the skin. A key development was measurement in both the visible and near infrared (NIR) regions. Measurement of both oxygenated and deoxygenated myoglobin and hemoglobin resulted in a more accurate measurement of Mox than could be achieved with measurement of only the deoxygenated components, as in traditional near-infrared spectroscopy (NIRS). Using the second derivative with respect to wavelength reduced the effects of scattering on the spectra and also made oxygenated and deoxygenated forms more distinguishable from each other. Selecting spectral bands where oxygenated and deoxygenated forms absorb filtered out noise and spectral features unrelated to Mox. NIR and visible bands were scaled relative to each other in order to correct for errors introduced by normalization. Multivariate Curve Resolution (MCR) was used to estimate Mox from spectra within each data set collected from healthy subjects. A Locally Weighted Regression (LWR) model was built from calibration set spectra and associated Mox values from 20 subjects using 2562 spectra. LWR and Partial Least Squares (PLS) allow accurate measurement of Mox despite variations in skin pigment or fat layer thickness in different subjects. The method estimated Mox in five healthy subjects with an RMSE of 5.4%.     

Determination of 1-hydroxypyrene in human urine by a multi-wall carbon nanotubes-modified glassy carbon electrode

A multi-walled carbon nanotubes (MWNTs) modified glassy carbon electrode (MWNT-GCE) was used to study the electrochemical behaviour of1-hydroxypyrene (1-OHP) and applied to its determination. The results showed that the modified electrode had a strong adsorptive ability to 1-OHP and enhances its electrochemical signal. By square wave voltammetry, the linear relationship of 1-OHP was 6?×?10^?9???8?×?10^?7?mol?L^?1 with a linear correlation coefficient of 0.996, and the detection limit was 1?×?10^?10?mol?L^?1. Compared with other published methods, this newly proposed method possesses many advantages such as very low detection limit, fast response, low cost and simplicity. And this method was applied successfully in the determination of 1‐OHP in real human urine samples.