Synthesis and polymerization of new styryl and methacryloyl monomers containing acidic saccharide moieties

New styryl‐type water‐insoluble and methacryloyl‐type water‐soluble monomers, N‐(p‐vinylbenzyl)‐1,2‐O‐isopropylidene‐6‐D ‐glucofuranuronamide and N‐(2‐methacryloylamino)ethyl‐1,2‐O‐isopropylidene‐6‐D ‐glucofuranuronamide, were synthesized from the most common acidic saccharide, D ‐glucuronic acid. Their radical homopolymerizations and copolymerizations with styrene and acrylamide were tried under various conditions. The isopropylidene groups in the resulting polymers were removed in a mixture of trifluoroacetic acid and water (2/1 v/v) to give the corresponding polymers with many pendant D ‐glucopyranuronyl groups with reactive reducing groups. The pendant reducing ends may be useful as potential binding sites under a hydrophilic atmosphere. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3893–3901, 2001     

Effects of Anti-Bacterial Agents,Sample Preparation and Contact Time on Anti-Bacterial Efficacy in MDPE Film

The anti-bacterial efficacy of medium-density polyethylene (MDPE) with various contents of different anti-bacterial agents was studied with respect to the effects of the anti-bacterial concentration, size and form of MDPE test-specimen, and the contact time. The three anti-bacterial agents used were carbendazim and zinc dimethyl dithiocarbamate (TROYSAN-S88), 2-hydroxypropyl3-piperazinyl-quinoline carboxylic acid methacrylate (HPQM), and silver substituted zeolite (ZEOMIC). The halo and plate-count-agar (PCA) tests were employed to assess the efficacies of the anti-bacterial performance. It was found that the inhibition zone from the halo test was most visible for the HPQM agent; the higher the HPQM content, the greater the inhibition zone. ZEOMIC exhibited no inhibition zone. The PCA test results suggested that after incorporating HPQM agent in the MDPE matrix, the% reductions of E. coli and S. aureus bacteria were as successfully high as 99.9% for all HPQM loadings.     

Surface characteristics of Zinc–TiO2 coatings prepared via micro-arc oxidation

Titanium (Ti) and its alloys are widely used as metallic biomaterials for fabrication of dental and orthopedic implants due to their favorable biocompatibility and corrosion resistance in a body environment. However, the thin oxide layer (TiO₂) on Ti substrate formed naturally in air or in many aqueous environments is bioinert and surrounded by fibrous tissues without producing any chemical or biological bond to bone when implanted. In the present work, Zinc-incorporated porous TiO₂ coatings (Zn–TiO₂) were prepared on Ti substrate by micro-arc oxidation (MAO) technique in the zinc gluconate-containing electrolyte. The surface morphology, cross-sectional morphology, composition, and phase of the coatings were analyzed using scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffractometry, respectively. Surface topography and roughness of the coatings were investigated by atomic force microscopy operated in tapping mode. The results showed that Zn was successfully incorporated into the porous TiO₂ coatings, which did not alter apparently its surface topography and phase composition. In conclusion, the formation of porous Zn–TiO₂ coatings endow Ti with potential bioactivity and antibacterial activity, and we believe that the porous Zn–TiO₂ coatings on Ti by MAO technique might be promising candidates for orthopedic and dental implants     

Oligoethylene‐end‐capped polylactides

Oligoethylene‐end‐capped polylactides were synthesized through the ring‐opening polymerization of L ‐lactide with alcohol‐terminated oligoethylenes as macroinitiators. The polymerization of L ‐lactide was carried out in bulk at 130 °C in the presence of stannous octoate and primary alcohols with four different molecular weights: 350, 425, 550, and 700 g/mol. The end‐capped copolymers that formed had a number‐average molecular weight of approximately 40,000 (weight‐average molecular weight/number‐average molecular weight = 1.7) according to gel permeation chromatography and were highly crystalline in comparison with the similarly formed homopolymer of L ‐lactide. The copolymer structure was characterized by Fourier transform infrared, NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and differential scanning calorimetry analysis. This work focused on developing more crystallizable and hydrolytically stable polylactide derivatives that could potentially be used as compatibilizers in polylactide–polyolefin blends or as nucleating agents for poly(L ‐lactide) or other polyesters. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5257–5266, 2005     

Microcalorimetry investigation of synthetic hemoprotein (albumin‐heme)

Recombinant human serum albumin (rHSA) incorporating the iron(II) complex of the tetraphenylporphyrin derivative (FepivP or FecycP) is a synthetic O₂‐carrying hemoprotein [albumin‐heme (rHSA‐FepivP or rHSA‐FecycP)], which acts as a red blood cell substitute. The association and dissociation behavior of FepivP and FecycP with rHSA has been initially investigated by isothermal titration calorimetry. A strong heat release appeared after the injection of albumin‐heme into a large molar excess of rHSA. This exothermic enthalpy change was due to the transference of hemes to the other free albumins. The difference in the heme binding affinity to rHSA can be manifested in the enthalpy term. Copyright © 2003 John Wiley & Sons, Ltd.     

Morphology of polyanhydride copolymers: Time‐resolved small‐angle X‐ray scattering studies of crystallization

Synchrotron small‐angle X‐ray scattering (SAXS) was used to study the isothermal crystallization kinetics of a family of polyanhydride copolymers consisting of 1,6‐bis(p‐carboxyphenoxy)hexane and sebacic acid monomers. In situ SAXS experiments permitted the direct observation of the crystallization kinetics. The structural parameters (the long period, lamellar thickness, and degree of crystallinity) were obtained from Lorentz‐corrected intensity profiles, one‐dimensional correlation functions, and interface distribution functions to form a comprehensive picture of the crystal morphology. The combination of these three analyses provided information not only on the lamellar dimensions but also on the polydispersity (nonuniformity) of these dimensions. Where possible, the crystallization kinetics were interpreted with a modified version of the Avrami equation. The results can be used to perform the rational design of controlled‐drug‐release formulations because crystallinity affects drug‐release kinetics. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 463–477, 2005     

Vascular endothelial and smooth muscle cell culture on NaOH-treated poly(epsilon-caprolactone) films: a preliminary study for vascular graft development

Tissue engineering offers the potential of providing vessels that can be used to replace diseased and damaged native blood vessels. The endothelization of a synthetic vascular graft minimizes the failures associated with blood clotting and platelet activation. The aim of this study was to culture vascular-derived endothelial and smooth muscle cells on both untreated and NaOH-treated poly(epsilon-caprolactone) (PCL) films, a biocompatible and bio-resorbable polymer, and to evaluate the behavior of both cell types as a preliminary study for vascular graft development. PCL films were prepared by hot pressing; characterized by DSC, IR, SEM, and scanning force microscopy; and treated with NaOH to increase the surface hydrophilicity before cell culture. Endothelial and smooth muscle cells, isolated from pig cava vein, were characterized by immunofluorescence and confocal microscopy studies of endothelial nitric oxide synthase and alpha-smooth muscle actin. Good adhesion, growth, viability and morphology of both the endothelial and smooth muscle cells on PCL films were obtained, but a light stimulation of mitochondrial activity was observed during short culture times. NaOH treatment improved the adhesion and enhanced the proliferation in both cell types. This verified the possible use of this modified polymer as a support in the preparation of a synthetic vascular graft. [Diagram: see text] SEM micrograph of smooth muscle cells cultured on NaOH-treated PCL film. (Original magnification: 1000x).     

复合生物材料的研究进展

从力学性能的改善和降解速率的可调度等角度,总结了复合生物材料与单一组分的材料相比,在生物医学领域应用中所表现出的综合使用性能的优越性。综述了复合生物材料,特别是用于骨修复的各类有机／无机复合材料近年来的研究进展状况。提出将与人骨中磷灰石微晶类似的羟基磷灰石纳米粒子与可降解聚酯材料进行复合,能够得到具有优越骨诱导性能并且能够降解的新型骨修复材料。这方面的研究代表了有机／无机复合生物材料领域新的发展方向。