Synthesis of polypyrrole nanoparticles and its grafting with silica gel for selective binding of chromium(VI)

Polypyrrole nanoparticles of desired structure have been synthesized through simple micelle technique. It is then grafted with functionalized silica gel to develop a novel organic-inorganic hybrid material. The role of dimethyl dichloro silane (coupling agent) in grafting is demonstrated. The nanoparticles are characterized by TEM, SEM and TGA. Grafting reactions are evaluated by spectral (FTIR) analysis and chemical test. The Cr(VI) binding behavior of the composite is studied in various pH of the medium. The selectivity in binding Cr(VI) is monitored. The metal ion adsorption capacity and surface area of the material are found to be 38 mg/g and 235 m²/g, respectively.     

Labelless impedance immunosensor based on polypyrrole-pyrolecarboxylic acid copolymer for hCG detection

In this work, a sensitive label-free impedimetric hCG-immunosensor was constructed by using a commercial screen-printing carbon ink electrode (namely disposable electrochemical printed chip) as the basis. The carbon ink electrode of DEP chip is modified first by deposition of polypyrrole-pyrole-2-carboxylic acid copolymer and thence hCG antibody immobilization via the COOH groups of pyrrole-2-carboxylic acid, which can serve as a linker for covalent biomolecular immobilization. The experimental results exposed that the designed immunosensor is more sensitive than other previously reported immunosensors, in the case of detection limit and linear range for antigen detection. With optimal fabrication parameters, the detection limit for α-hCG was 2.3 pg/mL in 10 mM phosphate buffer saline (PBS) solution containing 1% bovine serum albumine (BSA). Moreover, the use of inexpensive DEP chip as a basis for these immunosensors will allow for simple instrumentation, disposable and portable at low cost. This work also demonstrates a new approach to develop a sensitive and label-free impedimetric immunosensor based on screen-printed electrode for applications in clinical diagnosis.     

电化学合成吡咯与己内酰胺导电共聚物

采用恒电位方法实现了吡咯与己内酰胺在导电玻璃电极上的直接电化学共聚,聚合反应在含有0.1mol/L吡咯和1.5 mol/L己内酰胺的硝基甲烷电解质溶液中进行,外加电位控制在1.2 V以上.聚合产物中聚吡咯与聚己内酰胺链段的组成可通过调节合成电位加以控制.共聚物的形貌、结构与性质采用扫描电子显微镜、热重分析、红外光谱等手...     

Preparation and Characterization of Polypyrrole Microbelt via Cotton Template

脱脂棉作为模板首次合成了聚吡咯微带. 聚吡咯微带的结构通过红外进行表征,微带的稳定性、形貌和电性能通过扫描电子显微镜、热重分析仪和四探针电导率仪进行检测. 提出了聚吡咯微带的形成机理,并且结合实验结果分析了吡咯的摩尔浓度对材料的电导率的影响.     

聚吡咯-钛酸钡复合材料的制备和吸波性能

通过化学氧化法在乳液聚合体系中合成了聚吡咯. 然后以脱脂棉作为模板使用溶胶-凝胶法合成了钛酸钡微带. 以合成的两种材料作为基体相按不同的比例制备了聚吡咯-钛酸钡复合材料. 复合材料的结构形貌和性能通过红外、X射线衍射、扫描电镜以及网络分析仪检测. 使用PNA3629D网络分析仪测定复合材料在S和C波段的复数介电常数和微波损耗. 研究了钛酸钡和聚吡咯的质量比对复合材料吸波性能的影响. 提出了聚吡咯-钛酸钡复合材料的吸波机理.     

Flow injection determination of catechol based on polypyrrole–carbon nanotube–tyrosinase biocomposite detector

A flow injection catechol biosensor based on tyrosinase entrapped in carbon nanotube modified polypyrrole biocomposite film on a glassy carbon surface has been developed. Amperometric response was measured as a function of concentration of catechol, at a fixed bias voltage of −50 mV at a flow rate of 1 mL/min. The proposed biosensor exhibited impressive analytical performance such as a linear range between 3 and 50 μM, a short response time (10 s), a detection limit of 0.671 μM and an excellent operational (with a relative standard deviation of 0.54%) and long-term stability (85% remained after 10th week). A comparison of the analytical parameters of the developed biosensor with polypyrrole/tyrosinase film electrode was performed in the study. CNT was shown to enhance the electron transfer between the electrode and enzyme and capable to carry higher bioactivity owing to its intensified surface area.     

Polypyrrole coating doped by molybdo-phosphate anions for corrosion prevention of carbon steels

The polypyrrole coating was prepared from phosphoric acid aqueous solution containing the hetero-polyanion and pyrrole monomer to make new coating for corrosion prevention of carbon steels. The coating thus formed in the phosphate acid solution was doped by and by . The coating was flexible enough to cover the steel homogeneously without cracks, although many cracks were observed on the coating formed in a neutral aqueous solution of Na₂MoO₂. The 5.1-μm-thick polypyrrole coating makes the steel maintain the passive state for 48 h in neutral 3.5 wt% NaCl solution at pH 5.3 and for 80 h in acidic 3.5 wt% NaCl solution at pH 1.9. The coating decreased the corrosion rate of the steel by 1/200 in the neutral NaCl solution and by 1/340 in the acidic NaCl solution, if compared with the rate of the bare steel. The dissolution current of the steel during the immersion remained at the level of the typical passive current in the respective solutions.     

Synthesis, characterization and electrochemical behavior of polypyrrole/carbon nanotube composites using organometallic-functionalized carbon nanotubes

Thorn-like, organometallic-functionalized carbon nanotubes were successfully developed via a novel microwave hydrothermal route. The organometallic complex with methyl orange and iron (III) chloride served as reactive seed template, resulting in the oriented polymerization of pyrrole on the modified carbon nanotubes without the assistance of other oxidants. Morphological and structural characterizations of the carbon nanotube/methyl orange-iron (III) chloride and polypyrrole/carbon nanotube composites were examined using transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), infrared spectroscopy and X-ray diffraction (XRD). The electrochemical property of the polypyrrole/carbon nanotube composite was elucidated by cyclic voltammetry and galvanostatic charge-discharge. A specific capacitance of 304 F g⁻¹ was obtained within the potential range of −0.5-0.5 V in 1 M KCl solution.     

Preparation and electrochemistry of one-dimensional nanostructured MnO2/PPy composite for electrochemical capacitor

One-dimensional nanostructured manganese dioxide/polypyrrole (MnO₂/PPy) composite was prepared by in situ chemical oxidation polymerization of pyrrole in the host of inorganic matrix of MnO₂, using complex of methyl orange (MO)/FeCl₃ as a reactive self-degraded soft-template. The morphology and structure of the composite were characterized by infrared spectroscopy (IR) X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that the MnO₂/PPy composite consists of α-MnO₂ and PPy with nanotube-like structure. Electrochemical properties of the composite demonstrated the material showed good electrochemical reversibility after 500 charge-discharge cycles in the potential range of −0.4 to 0.6 V, the tube-like nanocomposite has the potential application in electrochemical capacitor.     

Physicochemical Characteristics of Polypyrrole/(Glucose oxidase)/(Prussian Blue)‐based Biosensor Modified with Ni‐ and Co‐Hexacyanoferrates

In this work, three types of electrodes suitable for amperometric glucose biosensors were designed. One type of electrode was based on bio‐selective layer of polypyrrole/(glucose oxidase)/(Prussian Blue) (Ppy/GOx/PB) and it was used as a control electrode regarding to which electrochemical properties of two other types of electrodes were compared. During the formation of Prussian blue layers graphite electrodes were additionally modified by Ni‐hexacyanoferrate (NiHCF) and by Co‐hexacyanoferrate (CoHCF) in order to design Ppy/GOx/PB‐NiHCF and Ppy/GOx/PB‐CoHCF electrodes, respectively. Some physicochemical characteristics of all three types of electrodes were evaluated and compared. The Ppy/GOx/PB‐NiHCF electrode showed wider linear range of the calibration curve than Ppy/GOx/PB and Ppy/GOx/PB‐CoHCF electrodes. The effect of temperature on analytical performance of the Ppy/GOx/PB‐NiHCF based biosensor has been evaluated and activation energy of enzyme catalysed reaction has been calculated within the temperature range of 15 °C to 30 °C.