Mode-mode coupling theory of itinerant electron antiferromagnetism in superconducting state

It has been considered since the first discovery of a high-T(c) cuprate that an antiferromagnetic (AF) state and a superconducting (SC) state are separated in it. However, it is very intriguing that the coexistence of the AF and SC states has recently been observed in HgBa(2)Ca(4)Cu(5)O(12+) (Hg-1245). Moreover, it is very novel that this coexistence of these two states appears if the SC-transition temperature T(c) is higher than the AF-transition temperature T(N). The mode-mode coupling theory can provide a clear elucidation of this novel phenomenon. A key point of this theory is that the AF susceptibility consists of the random-phase-approximation (RPA) term and the mode-mode coupling one. The RPA term works to make a positive contribution to the emergence of the antiferromagnetic critical point (AF-CP). In contrast, the mode-mode coupling term works to make a negative contribution to the emergence of the AF-CP. However, the growth of the SC-gap function in the d(x(2)-y(2))-wave SC state works to suppress the negative contribution of the mode-mode coupling term to the emergence of the AF-CP. Moreover, the effect of SC fluctuations near the SC-transition temperature T(c) suppresses the mode-mode coupling term of the AF susceptibility that works to hinder the AF ordering. For these two reasons, there is a possibility that the d(x(2)-y(2))-wave SC state is likely to promote the emergence of the AF-CP. Namely, the appearance of the above-mentioned novel coexistence of the AF and SC states observed in Hg-1245 can be explained qualitatively on the basis of this idea.     

Evaluating a time-delay of hydrogen production quantitatively in photosynthetic bacteria for stabilizing intermittency

Renewable energy is regarded as a clean energy source but has some problems, one of which is intermittency. To reduce this, the time-delay of hydrogen production by photosynthetic bacteria can be effective. In this study, we qualitatively evaluated the time-delay of hydrogen production by photosynthetic bacteria under various irradiation conditions, and we also quantitatively evaluated it by fitting the experimental data and the hydrogen production model with a genetic algorithm. As a result of model fitting, we found that the relationship between the lengths of the optimized time-delay of hydrogen production by photosynthetic bacteria and the amount of light irradiation is linear. And we also found that the time-delay of hydrogen production by photosynthetic bacteria had an upper limit under low light intensity. We have suggested the existence of an energy store mechanism in photosynthetic bacteria.     

Artificial nucleosides possessing metal binding sites at the 3'- and 5'-positions of the deoxyribose moieties

This paper describes a convenient synthetic procedure for nucleoside mimics, 1-6, in which the 3',5'-hydroxy groups of natural 2'-deoxythymidine or 2'-deoxyadenosine are replaced by thiol, amine, or alkylthiol groups. Such nucleosides would be built up into a single DNA strand with cooperative participation of metal coordination, where internucleoside linkages are replaced by metal complexation motifs. The X-ray crystal structure and complexation behaviors of 3',5'-dithiothymidine, 1, with Au(I) are also reported.     

Layer-by-layer assembly of metal-mediated multiporphyrin arrays

Two types of multiporphyrin arrays, mediated by PdCl4(2-) complex ions at the air-water interface, were alternately transferred onto solid supports to form three-dimensional organized multilayers by a layer-by-layer method.     

Improved surface morphology of flow-modulated MOVPE grown AIN on sapphire using thin medium-temperature AIN buffer layer

High-temperature (HT) AIN films were grown on (0 0 0 1) sapphire by low-pressure flow-modulated (FM) metal organic vapor phase epitaxy (MOVPE) with and without inserting a thin medium-temperature (MT) AIN layer. To suppress parasitic reactions between the sources of trimethylaluminum (TMA) and ammonia (NH₃), TMA and NH₃ was introduced to the reactor of MOVPE by alternating supply way. Surface morphology and crystalline quality were characterized by a scanning electronic microscopy (SEM), atomic force microscopy (AFM) and X-ray rocking curve (XRC) measurements of (0 0 0 2) and (10-12) diffractions. The AFM and SEM measurements indicated that the thin MT-AIN layer had a strong influence on the surface morphology of the HT-AIN films. The surface morphology became quite smooth by inserting the thin MT-AIN layer and surface RMS roughness values were 0.84 nm and 13.4 nm for the HT-AIN films with and without inserting the thin MT-AIN buffer layer, respectively. By etching the samples in aqueous KOH solution, it was found that the polarity of AIN films was different, the HT-AIN film with the thin MT-AIN layer could not be etched, indicating that the film had an Al-polar surface; however, the film without the MT-AIN layer was etched, which was explained that that film had a N- or mixed-polar surface. The mechanism for the origin of the different polarity of HT-AIN with and without the thin MT-AIN layer was proposed and discussed in detail.     

Growth of undoped and Zn-doped GaN nanowires

Undoped and Zn-doped GaN nanowires were synthesized by chemical vapor deposition (CVD), and the effects of substrates, catalysts and precursors were studied. A high density of GaN nanowires was obtained. The diameter of GaN nanowires ranged from 20 nm to several hundreds of nm, and their length was about several tens of μm. The growth mechanism of GaN nanowires was discussed using a vapor–liquid–solid (VLS) model. Furthermore, room-temperature cathodoluminescence spectra of undoped and Zn-doped GaN nanowires showed emission peaks at 364 and 420 nm, respectively.     

Non-steady state solidification of the Nd-123 superconducting oxides

Crystal growth of the melt-textured bulk Nd_1+xBa_2−xCu₃O_6+d (Nd123) superconducting oxides was investigated by employing isothermal undercooling solidification with hot-seeding in air. From the relationship between growth length and holding time, the Nd123 crystal was found to have almost stopped growing after a certain growth period, while the growth length increased proportionally to the holding time at an early stage of the crystal growth. As a result of quantitative analysis for the Nd123 crystal of which solidification was terminated, the distribution of the Nd/Ba substitution was observed to decrease in the Nd123 single crystal matrix from the seed crystal to the edge of the Nd123 crystals. Also, the substitution content at the edge of the Nd123 crystal, which corresponds to that at the final stage of the crystal growth, was found to be in good agreement with the minimum substitution of the Nd123 solid solution phase in the equilibrium phase diagram at this process temperature. These compositional changes could be explained using the equilibrium phase diagram as associated with the solid solution formation, which is responsible for the non-steady state solidification of the Nd123 crystals even for the isothermal undercooling processing.     

Persistent and emission color tunable poly(phenylene‐ethynylene)s covered with polyhedral oligomeric silsesquioxanes

The development of chemically and thermally persistent blue‐, and green‐luminescent hybrid π‐conjugated polymers consisting of poly(phenylene‐ethynylene) conjugated backbone wrapped with the rigid three‐dimensional polyhedral oligomeric silsesquioxane (POSS) units was successfully achieved by means of the Sonogashira‐Hagihara coupling reaction. Because of the steric effect of POSS units, the luminescence stability of the conjugated backbone was significantly enhanced. Moreover, emission color was also easily tunable only by changing the ratio of POSS moieties incorporated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8112–8116, 2008     

Explosion hazards of ion exchange resin mixed with perchloric acid

On January 21, 2003, an explosion occurred while ion exchange resin (IER) was being used to separate impurities from uranium solution. To clarify the cause of the accident and go/no-go criteria of the explosion, elemental analysis of the IER, DSC analysis, and SIKAREX analysis (a screening tool for runaway reactions) were performed. Finally, experiments on the same scale as the accident were conducted in an explosion chamber. When HClO₄ was added to IER-NO₃, the IER violently exploded without any heating nor metal ions such as uranium. It was confirmed that the accident was caused by an incorrect procedure in the chemical process. From the standpoint of explosion safety, IER-NO₃ in particular should be kept away from perchloric acid in the laboratory.