红黑排序混合算法收敛速度分析

The algorithm of applying the block Gauss elimination to the Red-Black or-dering matrix to reduce the order of the system then solve the reduced system byiterative methods is called Hybrid Red-Black Ordering algorithm.In this paper,we discuss the convergence rate of the hybrid methods combined with JACOBI,CG,GMRES(m).Theoretical analysis shows that without preconditioner thesethree hybrid methods converge about 2 times as fast as the corresponding natural ordering methods.For the case that all the eigenvalues is near the real axis, the GMRES(m) algorithm converges about 3 times faster than the natural ordering GMRES(m).Various numerical experiments are presented.For large scale prob-lem with preconditioners, numerical experiments show that the GMRES(m) hybrid methods converge from about 3 times to even 5 times as fast as the natural order-ing methods and the computing time is reduced to about 1/3 even 1/6 of that of the natural ordering methods.     

100μmFIR-FEL摇摆器的改进

经过几年实验发现，摇摆器的磁场强度、峰值误差和好场区宽度对束波作用效率有很大影响。为了提高摇摆器性能对摇摆器如下改进：（1）提高磁场强度：永磁块材料采用北京钢研院的钕铁硼N39SH，其风达到11．6kOe（10e≈79．578A／m），B，达到12．3kGs（1Gs=10^-4T），（BH）max为36MGOe；摇摆器周期长度由30mm改为32mm，磁块与磁极宽度的比值由9：6改为11：5；（2）减小峰值误差和增加好场区宽度：改进永磁块、磁极的形状和固定方式，从机械上消除不规则磁块、磁极形状带来的负面影响。通过上述改进可以提高单电子小信号增益与理想增益的比率，即提高整个摇摆器品质。精密的磁场自动测量系统是摇摆器调试过程中所必须的装置，该系统经过改进，具有高精度、高稳定度、可同时监测x、y、z方向磁场值、操作方便等优点，为摇摆器的研制打下良好基础。     

高功率超宽带减小型锥削螺旋天线

随着超宽带（UWB）技术应用的发展，螺旋天线以其园极化辐射成为关注的焦点。高功率超宽带螺旋天线的设计难点是：对于较宽频带的超宽带脉冲信号，能否保证所设计的螺旋天线在较宽的频带内保持良好的方向性和园极化特性，且同时满足高功率容量，为此通过理论分析和数值模拟设计出减小型锥销螺旋天线，对其进行了相应的实验研究。     

双振动合成仪器的设计

指出了用示波器演示双振动合成的不足，设计了BS—Ⅱ型双频调相信号仪，并给出了应用该仪器获得的部分实验图象。     

频谱测量中的边带噪声误差估测

将频谱测量中的误差分为两大类，即被测信号的误差和频谱仪本身的误差。图1为仪器输入信号Vin中包含的噪声Vn和信号Vs的频谱，则瞬时噪声Vn=Vin-Vs,在频域上关于信号工对称。笋析证明边带噪声是由幅度噪声和相位噪声组成，并用小信号调制理论来描述，     

Multiplexing Chaotic Signals Generated by Colpitts Oscillator and Chua Circuit Using Dual Synchronization

We demonstrate multiplexing chaotic signals generated by two totally different dynamic systems (one is a Colpitts oscillator and the other is a Chua circuit) using dual synchronization and propose a method to select the proper coupling parameters. In the response systems, the cross coupling method is used, in which the voltage difference between the sum of two master oscillators and one slave oscillator is converted to current and then feed into the other slave oscillator. The result in this letter offers a potential multiuser coherent chaotic communication scheme where different chaotic oscillators can be used in one system.     

Energy-Momentum Pseudo-Tensor of Relic Gravitational Wave of Both the Polarized States

Unlike usual celestial gravitational waves, the relic gravitational waves （RGWs） form random signals in curved spacetime background. We calculate the energy-momentum pseudo-tensor of a certain component of the RGWs propagating along arbitrary directions in Cartesian coordinates. It is found that the energy density of RGWs is positive definitely, and the momentum density components have reasonable behaviour. Such results may provide a theoretical basis for the detection of RGWs.     

变参数波振器中小信号增益公式

利用微扰展开技术推导出变参数波振器的小信号增益两个近似求积表达式并将其计算结果与数值模拟结果进行了比较,二者吻合很好。利用近似解析式对小信号增益进行了初步探讨,得到了电子入射能量可低于初始谐振能,能散度允许范围受波振器设计影响以及降低锥度改变率可提高小信号增益等新结论。     

Detecting emboli from Doppler ultrasound signals with the wavelet packet analysis method

A Doppler ultrasound analysis method based on wavelet package transform was proposed for embolic detection. The embolic Doppler signal was firstly decomposed using the wavelet packet. Then the sensitive characteristics were calculated from each sub-band signal and used in the emboli classification. This method was applied to analyze 300 cases simulated and 163 cases clinical Doppler signals. The minimum error ratio of embolic detection using this method was 13 percents lower than that using the traditional spectrogram analysis method.It was shown that this method overcame the limit between the time and frequency resolution in the short time Fourier transform, improved the accuracy of embolic detection greatly and extracted more reliable parameters for the clinical diagnosis.