Wetting and electrowetting properties of carbon nanotube templated parylene films

In this study, we compared the wetting and electrowetting properties of a planar parylene (poly(p-xylylene)) film to those of a nanostructured parylene film. To generate the nanostructured film, we used an aligned array of multiwalled carbon nanotubes as a template; a thin coating of parylene was deposited on the nanotube template to generate a parylene film with a nanoscale roughness structure. Static contact angle measurements indicated a very significant increase in the water contact angle from approximately 73 degrees for planar parylene to approximately 110 degrees for the nanotemplated parylene. In addition, we performed electrowetting experiments to dynamically tune the contact angle by application of electric potential. Interestingly, the flat parylene film showed contact angle saturation at an applied voltage of approximately 40 V, while the nanotemplated parylene film did not experience saturation in the contact angle response even for voltages up to 80 V. These results show that engineering a nanoscale roughness structure to a polymer film results in significant changes to the wetting and electrowetting properties of the polymer.     

Study of proteinous and micellar microenvironment using donor acceptor charge transfer fluorosensor N,N-dimethylaminonaphthyl-(acrylo)-nitrile

Interaction of charge transfer fluorophore N,N-dimethylaminonaphthyl-(acrylo)-nitrile (DMANAN) with globular proteins Human Serum Albumin (HSA) and Bovine Serum Albumin (BSA) brings forth a marked change in the position and intensity of band maxima both in case of absorption and fluorescence spectra. Spectroscopic approach has been elaborately implemented to explore the binding phenomena of the probe with HSA and BSA and it is found that the extent of binding of the probe to both serum albumins is similar in nature. Steady state fluorescence anisotropy values, fluorescence quenching study using acrylamide quencher and Red Edge Excitation Shift (REES) help in drawing reliable conclusions regarding the location of the probe molecule within the hydrophobic cavity of the proteins. An increase in fluorescence lifetime of the probe molecule solubilized in both the proteinous media also indicate that the probe is located at the motionally restricted environment inside the hydrophobic cavity of proteins and hence non-radiative channels are less operative than in the bulk water. Similarly, the variation of position and intensity of the emission maxima of DMANAN solubilized in micellar medium of Sodium Dodecyl Sulphate (SDS) also predicts well the critical micellar concentration (CMC) and polarity of micellar microenvironment.     

On competitiveness in uniform utility allocation markets

We call a market competitive if increasing the endowment of one buyer does not increase the equilibrium utility of another. We show that every competitive uniform utility allocation market is a submodular utility allocation market, answering a question of Jain and Vazirani [K. Jain, V.V. Vazirani, Eisenberg-Gale markets: Algorithms and structural properties, in: STOC, 2007]. Our proof proceeds via characterizing non-submodular fractionally sub-additive functions.     

Synthetic applications of Baylis-Hillman chemistry: an efficient and solely stereoselective synthesis of (E)-alpha-methylcinnamic acids and potent hypolipidemic agent LK-903 from unmodified Baylis-Hillman adducts

An efficient and solely stereoselective synthesis of (E)-alpha-methylcinnamic acids has been accomplished in single pot by reduction of the unmodified Baylis-Hillman adducts, methyl-3-hydroxy-3-aryl-2-methylenepropanoates with I(2)/NaBH(4) reagent system at room temperature followed by hydrolysis. The efficacy of this method has been proved in the total synthesis of 1-[p-(myristyloxy)-alpha-methylcinnamoyl]glycerol, LK-903, a highly active hypolipidemic agent.     

Arraying of intact liposomes into chemically functionalized microwells

Here, we describe a protocol to bind individual, intact phospholipid bilayer liposomes, which are on the order of 1 microm in diameter, in microwells etched in a regular array on a silicon oxide substrate. The diameter of the wells is on the order of the liposome diameter, so only one liposome is located in each well. The background of the silicon oxide surface is functionalized with a PEG oligomer using the contact printing of a PEG silane to present a surface that resists the adsorption of proteins, lipid material, and liposomes. The interiors of the wells are functionalized with an aminosilane to facilitate the conjugation of biotin, which is then bound to Neutravidin. The avidin-coated well interiors bind the liposomes whose surfaces contain biotinylated lipids. The specific binding of the liposomes to the surface using the biotin-avidin linkage, together with the resistant nature of the background and the physical confinement of the wells, allows the liposomes to remain intact and to not unravel, rupture, and fuse onto the surface. We demonstrate this intact arraying using confocal laser scanning microscopy of fluorophores specifically tagging the microwells, the lipid bilayer, and the aqueous interior of the liposome.     

Simultaneous quantitation of rosuvastatin and gemfibrozil in human plasma by high-performance liquid chromatography and its application to a pharmacokinetic study

A simple, sensitive and specific high-performance liquid chromatography method is described for simultaneous determination of rosuvastatin (RST) and gemfibrozil (GFZ) in human plasma using celecoxib as an internal standard (IS). The assay procedure involved extraction of RST, GFZ and IS from plasma into acetonitrile. Following separation and evaporation of the organic layer the residue was reconstituted in the mobile phase and injected onto an X-Terra C(18) column (4.6 x 150 mm, 5.0 microm). The chromatographic run time was less than 20 min using flow gradient (0.0-1.60 mL/min) with a mobile phase consisting of 0.01 M ammonium acetate:acetonitrile:methanol (50:40:10, v/v/v) and UV detection at 275 nm. Nominal retention times of RST, GFZ and IS were 6.7, 13.9 and 16.4 min, respectively. Absolute recovery of both analytes and IS was greater than 90%. The lower limit of quantification (LLOQ) of RST and GFZ was 0.03 and 0.30 microg/mL, respectively. Linearity was excellent (r(2) = 0.999) in the 0.03-10 microg/mL and 0.3-100 microg/mL ranges for RST and GFZ, respectively. The inter- and intra-day precisions in the measurement of RST quality control (QC) samples 0.03, 0.09, 2.50 and 8.00 microg/mL were in the range 2.37-9.78% relative standard deviation (RSD) and 0.92-10.08% RSD, respectively. Similarly, the inter- and intra-day precisions in the measurement of GFZ quality control (QC) samples 0.30, 0.90, 25.0 and 80.0 microg/mL were in the ranges 2.79-6.27 and 0.96-9.69% RSD, respectively. Accuracies in the measurement of QC samples for RST and GFZ were in the range 85.43-107.23 and 84.98-102.35% respectively, of the nominal values. RST and GFZ were stable in the array of stability studies viz., bench-top, auto-sampler and freeze-thaw cycles. Stability of RST and GFZ was established for 1 month at -80C. The application of the assay in an oral pharmacokinetic study in rats co-administered with RST and GFZ is described.     

1,4‐Dipolar Cycloaddition Reactions in Ionic Liquids: A Facile Synthesis of 9aH,15H‐[1]Benzopyrano[3′,2′: 3,4]pyrido[2,1‐a]isoquinolines (=9aH,15H‐Benzo[a][1]benzopyrano[2,3‐h]quinolizines)

Ionic liquids were found to be a suitable reaction medium for 1,4‐dipolar cycloaddition reactions of an isoquinoline, an activated alkyne, and a 4‐oxo‐4H‐1‐benzopyran‐3‐carboxaldehyde at room temperature to afford [1]benzopyrano‐pyrido‐isoquinoline (=9aH,15H‐benzo[a][1]benzopyrano[2,3‐h]quinolizine) derivatives selectively in good yields. The ionic liquid can be recovered and recycled in further runs without loss of activity.     

Atom Transfer Radical Polymerization (ATRP) of Ethyl Acrylate: Its Mechanistic Studies

Atom transfer radical polymerization (ATRP) of ethyl acrylate was carried out in bulk using ethyl 2-bromoisobutyrate as initiator, CuBr as well as CuCl as catalyst in combination with different ligands e.g., 2,2′ bipyridine (bpy)andN,N, N′,N″,N″-pentamethyldiethylenetriamine (PMDETA). In most of the cases very high conversion (72–98%) was achieved. The polymerization was well controlled with a linear increase of molecular weight (M_n^SEC) with conversion and relatively narrow molecular weight distributions (polydispersity index 1.2–1.3). Use of PMDETA as the ligand resulted in faster polymerization rate (98% conversion in 1 h) than those using bipyridine (72% conversion in 5 h). The MALDI-TOF-MS analysis of poly (ethyl acrylate) (PEA) prepared by using bpy as ligand showed the presence of halogen as the end group. On the contrary, when PMDETA was used as the ligand, the mass analysis showed no trace of this end group.     

A Trust Region SQP Algorithm for Equality Constrained Parameter Estimation with Simple Parameter Bounds

We describe a new algorithm for a class of parameter estimation problems, which are either unconstrained or have only equality constraints and bounds on parameters. Due to the presence of unobservable variables, parameter estimation problems may have non-unique solutions for these variables. These can also lead to singular or ill-conditioned Hessians and this may be responsible for slow or non-convergence of nonlinear programming (NLP) algorithms used to solve these problems. For this reason, we need an algorithm that leads to strong descent and converges to a stationary point. Our algorithm is based on Successive Quadratic Programming (SQP) and constrains the SQP steps in a trust region for global convergence. We consider the second-order information in three ways: quasi-Newton updates, Gauss-Newton approximation, and exact second derivatives, and we compare their performance. Finally, we provide results of tests of our algorithm on various problems from the CUTE and COPS sets.     

Construction of an inexpensive surface plasmon resonance instrument for use in teaching and research

The construction of an inexpensive SPR instrument that can be used for both teaching and research is described. Using a 2′ × 2′ optical table to construct this instrument allows both scientists and students full access to the operation of the spectrometer. Furthermore, the use of open platform instrumentation has the advantage of maintaining the focus on the relationship between emerging technology and analytical chemistry as well as allowing the user to modify the instrument to enhance the measurement process for a particular application. This is a change from the learning paradigm used in most research and teaching laboratories where commercial instrumentation is treated as a black box due to its complexity. Three studies, which were performed using this instrument, are presented to demonstrate the suitability of this instrument for both teaching and research. These studies include measuring the refractive index of alcohols, investigating the partitioning of ruthenium (II) trisbipyridine chloride into Nafion, and understanding the mechanism controlling metal ion adsorption by polyacrylamide hydrogels.