Direct Patterning of Copper on Polyimide by Site‐Selective Surface Modification via a Screen‐Printing Process

We demonstrate a simple route to fabricating copper circuit patterns on the surface of polyimide film. The copper pattern can be obtained in three steps: 1) Formation of partially potassium hydroxide modified pattern via a screen‐printing process, 2) formation of macromolecular metal complex with copper, and 3) copper metallization by DMAB reduction. The morphologies of these copper patterns are determined by cross‐sectional transmission electronic microscopy (TEM), scanning electronic microscopy (SEM), and atomic force microscopy (AFM). Furthermore, the growing process of the metallic copper film is investigated. The direct patterning of copper patterns onto polyimide substrates is promising for use in electronics industry as a large‐area and low‐cost processing technique.     

Preparation and enhanced visible-light photocatalytic H2-production activity of CdS-sensitized Pt/TiO2 nanosheets with exposed (001) facets

CdS-sensitized Pt/TiO(2) nanosheets with exposed (001) facets were prepared by hydrothermal treatment of a Ti(OC(4)H(9))(4)-HF-H(2)O mixed solution followed by photochemical reduction deposition of Pt nanoparticles (NPs) on TiO(2) nanosheets (TiO(2) NSs) and chemical bath deposition of CdS NPs on Pt/TiO(2) NSs, successively. The UV and visible-light driven photocatalytic activity of the as-prepared samples was evaluated by photocatalytic H(2) production from lactic acid aqueous solution under UV and visible-light (λ ≥ 420 nm) irradiation. It was shown that no photocatalytic H(2)-production activity was observed on the pure TiO(2) NSs under UV and/or visible-light irradiation. Deposition of CdS NPs on Pt/TiO(2) NSs caused significant enhancement of the UV and visible-light photocatalytic H(2)-production rates. The morphology of TiO(2) particles had also significant influence on the visible-light H(2)-production activity. Among TiO(2) NSs, P25 and the NPs studied, the CdS-sensitized Pt/TiO(2) NSs show the highest photocatalytic activity (13.9% apparent quantum efficiency obtained at 420 nm), exceeding that of CdS-sensitized Pt/P25 by 10.3% and that of Pt/NPs by 1.21%, which can be attributed to the combined effect of several factors including the presence of exposed (001) facets, surface fluorination and high specific surface area. After many replication experiments of the photocatalytic hydrogen production in the presence of lactic acid, the CdS-sensitized Pt/TiO(2) NSs did not show great loss in the photocatalytic activity, confirming that the CdS/Pt/TiO(2) NSs system is stable and not photocorroded.     

部分线性单指标EV模型中参数的经验似然置信域

考虑部分线性单指标EV模型,利用纠偏方法构造了模型中未知参数的经验对数似然比统计量.在适当条件下,证明了所提出的统计量依分布收敛于标准x2分布,所得结果可以构造未知参数的置信域.通过模拟研究在置信域精度及其覆盖概率大小方面进行了说明.     

厚二氧化硅光波导薄膜制备及其特性分析

以硅烷和氧化二氮作为反应气体，采用等离子体增强化学气相沉积(PECVD)技术，不使用掺杂，在单晶硅衬底上制备了用于平面光波导的二氧化硅薄膜。研究了薄膜折射率和淀积速率与工艺参量之间的关系，通过棱镜耦合仪、傅里叶变换红外光谱、原子力显微镜等测试手段，分析了薄膜的结构和光学特性。结果表明，实验能快速生长厚二氧化硅薄膜，薄膜表面平整，颗粒度均匀，同时薄膜具有折射率精确可控和红外透射性能好的特点，非常适合制作光波导器件。     

Representation of elliptic Ding-Iohara algebra

We define a vector representation V(u)of elliptic Ding-Iohara algebra u(q,t,p).Furthermore,we construct the tensor products of the vector representations and the Fock modulesF(u)by taking the inductive limit of certain subspaces in the finite tensor products of vector representations.     

Regioisomerism effect (RIE) on optimizing ultralong organic phosphorescence lifetimes

Organic phosphorescence materials demonstrate potential optoelectronic applications due to their remarkably ultralong organic phosphorescence (UOP) lifetime and abundant optical characteristics prior to the fluorescence materials. For a better insight into the intrinsic relationship among regioisomeric molecules, crystalline interactions, and phosphorescence properties, three crystalline dicarbazol-9-yl pyrazine-based regioisomers with para-, meta-, and ortho-convergent substitutions (p-DCzP, m-DCzP, and o-DCzP) were designed and presented gradually increased UOP lifetimes prolonging from 63.14, 127.93 to 350.46 ms, respectively, due to the regioisomerism effect (RIE) which would be an effective strategy for better understanding of structure-property of UOP materials.     

Supramolecular Assembly of TPE-Based Glycoclusters with Dicyanomethylene-4H-pyran (DM) Fluorescent Probes Improve Their Properties for Peroxynitrite Sensing and Cell Imaging

Two red-emitting dicyanomethylene-4H-pyran (DM) based fluorescent probes were designed and used for peroxynitrite (ONOO⁻) detection. Nevertheless, the aggregation-caused quenching effect diminished the fluorescence and restricted their further applications. To overcome this problem, tetraphenylethylene (TPE) based glycoclusters were used to self-assemble with these DM probes to obtain supramolecular water-soluble glyco-dots. This self-assembly strategy enhanced the fluorescence intensity, leading to an enhanced selectivity and activity of the resulting glyco-dot comparing to DM probes alone in PBS buffer. The glyco-dots also exhibited better results during fluorescence sensing of intracellular ONOO⁻ than the probes alone, thereby offering scope for the development of other similar supramolecular glyco-systems for chemical biological studies.     

Ultralong Phosphorescence from Organic Ionic Crystals under Ambient Conditions

A new type of materials, organic salts in the crystal state, have ultralong organic phosphorescence (UOP) under ambient conditions. The change of cations (NH₄⁺, Na⁺, or K⁺) in these phosphors gives access to tunable UOP colors ranging from sky blue to yellow green, along with ultralong emission lifetimes of over 504 ms. Single‐crystal analysis reveals that unique ionic bonding can promote an ordered arrangement of organic salts in crystal state, which then can facilitate molecular aggregation for UOP generation. Additionally, reversible ultralong phosphorescence can be realized through the alternative employment of fuming gases (ammonia and hydrogen chloride), demonstrating its potential as a candidate for visual ammonic or hydrogen chloride gas sensing. The results provide an environmental responsible and practicable synthetic approach to expanding the scope of ultralong organic phosphorescent materials as well as their applications.     

Significant Acceleration of Photocatalytic CO2 Reduction at the Gas-Liquid Interface of Microdroplets**

Solar-driven CO₂ reduction reaction (CO₂RR) is largely constrained by the sluggish mass transfer and fast combination of photogenerated charge carriers. Herein, we find that the photocatalytic CO₂RR efficiency at the abundant gas-liquid interface provided by microdroplets is two orders of magnitude higher than that of the corresponding bulk phase reaction. Even in the absence of sacrificial agents, the production rates of HCOOH over WO₃ ⋅ 0.33H₂O mediated by microdroplets reaches 2536 μmol h⁻¹ g⁻¹ (vs. 13 μmol h⁻¹ g⁻¹ in bulk phase), which is significantly superior to the previously reported photocatalytic CO₂RR in bulk phase reaction condition. Beyond the efficient delivery of CO₂ to photocatalyst surfaces within microdroplets, we reveal that the strong electric field at the gas-liquid interface of microdroplets essentially promotes the separation of photogenerated electron-hole pairs. This study provides a deep understanding of ultrafast reaction kinetics promoted by the gas-liquid interface of microdroplets and a novel way of addressing the low efficiency of photocatalytic CO₂ reduction to fuel.     

Effect of AlSiFe on the anodizing process of 6063 aluminum

AlSiFe phase can form microscopic galvanic couples that decrease corrosion resistance of 6063 aluminum which may influence the anodizing process. Two samples of 6063 aluminum were prepared. One sample was cut along the extrusion direction of the billet, and the other was cut perpendicular to the extrusion direction. Both samples exhibited the same characteristics, except for the distribution of the second phase AlSiFe. Both samples were subjected to anodizing treatments. Comparison between anodic oxide films was performed. The microstructure of Al substrates and anodic oxide films were examined using a scanning electron microscope, an optical microscope, and a glow discharge optical emission spectrometer. Results indicated that the thicknesses and elemental distributions of the anodic oxide films were almost the same. Moreover, the second phase AlSiFe influenced the anodic oxidation process, resulting in cavities in the anodic oxide film that affected its brightness. Copyright © 2016 John Wiley & Sons, Ltd.