Mixed ionic–electronic conducting (MIEC) ceramic-based membranes for oxygen separation

Although Nernst observed ionic conduction of zirconia–yttria solutions in 1899, the field of oxygen separation research remained dormant. In the last 30 years, research efforts by the scientific community intensified significantly, stemming from the pioneering work of Takahashi and co-workers, with the initial development of mixed ionic–electronic conducting (MIEC) oxides. A large number of MIEC compounds have been synthesized and characterized since then, mainly based on perovskites (ABO_3−δ and A₂BO_4±δ) and fluorites (A_δB_1−δO_2−δ and A_2δB_2−2δO₃), or dual-phases by the introduction of metal or ceramic elements. These compounds form dense ceramic membranes, which exhibit significant oxygen ionic and electronic conductivity at elevated temperatures. In turn, this process allows for the ionic transport of oxygen from air due to the differential partial pressure of oxygen across the membrane, providing the driving force for oxygen ion transport. As a result, defect-free synthesized membranes deliver 100% pure oxygen. Electrons involved in the electrochemical oxidation and reduction of oxygen ions and oxygen molecules respectively are transported in the opposite direction, thus ensuring overall electrical neutrality. Notably, the fundamental application of the defect theory was deduced to a plethora of MIEC materials over the last 30 years, providing the understanding of electronic and ionic transport, in particular when dopants are introduced to the compound of interest. As a consequence, there are many special cases of ionic oxygen transport limitation accompanied by phase changes, depending upon the temperature and oxygen partial pressure operating conditions. This paper aims at reviewing all the significant and relevant contribution of the research community in this area in the last three decades in conjunction with theoretical principles.     

Adsorption of concanavalin A and lentil lectin on platinum electrodes followed by electrochemical impedance spectroscopy: effect of protein state

Adsorption of concanavalin A and lentil lectin on platinum electrode was investigated through electrochemical impedance spectroscopy and cyclic voltammetry. By using ferro/ferricyanide system to probe the electrochemical interface it was possible to model the EIS data with a simple equivalent circuit. The blocking effect for electron transfer reactions observed with these proteins, indicated that they readily adsorb on platinum surface and that the degree of adsorption is related to the state of the proteins. When the proteins are in the presence of divalent cations (Ca²⁺ and Mn²⁺) they adsorb less strongly than in their absence. There is also evidence that at least convanavalin A retains its biological activity in the adsorbed state.     

Towards universal potentials for (H2)2 and isotopic variants: post-Born-Oppenheimer contributions

Adiabatic corrections are evaluated for the interaction of two hydrogen molecules (H(2))(2) and isotopic variants. Their contribution to the cluster formation amount up to 10% of the interaction energy. Added to the best ab initio Born-Oppenheimer isotropic potential, they correct especially its short range repulsive part. Calculations of second virial coefficients are improved in general, with an impressive agreement with experiments for gaseous D(2) in a large range of temperatures. The potentials are available in both analytical and numerical forms.     

Mean Convergence Time of Inhomogeneous Genetic Algorithm with Elitism

The theoretical study of a genetic algorithm (GA) has focused mainly on establishing its convergence in probability and almost always to the global optimum. In this article, we establishsufficient conditions for the finiteness of convergence mean time of the genetic algorithm with elitism. We obtain bounds for the probability of convergence to the global optimum in the first n iterations as a by-product.     

Inorganic membranes for hydrogen production and purification: a critical review and perspective

Hydrogen as a high-quality and clean energy carrier has attracted renewed and ever-increasing attention around the world in recent years, mainly due to developments in fuel cells and environmental pressures including climate change issues. In thermochemical processes for hydrogen production from fossil fuels, separation and purification is a critical technology. Where water-gas shift reaction is involved for converting the carbon monoxide to hydrogen, membrane reactors show great promises for shifting the equilibrium. Membranes are also important to the subsequent purification of hydrogen. For hydrogen production and purification, there are generally two classes of membranes both being inorganic: dense phase metal and metal alloys, and porous ceramic membranes. Porous ceramic membranes are normally prepared by sol-gel or hydrothermal methods, and have high stability and durability in high temperature, harsh impurity and hydrothermal environments. In particular, microporous membranes show promises in water gas shift reaction at higher temperatures. In this article, we review the recent advances in both dense phase metal and porous ceramic membranes, and compare their separation properties and performance in membrane reactor systems. The preparation, characterization and permeation of the various membranes will be presented and discussed. We also aim to examine the critical issues in these membranes with respect to the technical and economical advantages and disadvantages. Discussions will also be made on the relevance and importance of membrane technology to the new generation of zero-emission power technologies.     

Photolytic degradation of the insecticide thiamethoxam in aqueous medium monitored by direct infusion electrospray ionization mass spectrometry

Photodegradation of the insecticide thiamethoxam (1), 3-[(2-chloro-5-thiazolyl)methyl]tetrahydro-5-methyl-N-nitro-4H-1,3,5-oxadiazin-4-imine, in an aqueous medium was monitored by electrospray ionization mass spectrometry in the positive ion mode, ESI(+)-MS. An aqueous solution of (1) was incessantly exposed to a UV radiation source and aliquots were taken after reaction times of 1, 2, 3, and 4 h. Analysis by GC/NCI-MS revealed that (1) was continuously degraded under these experimental conditions. However, the total organic carbon (TOC) content remained practically constant during the exposition period, thereby indicating that 1 was not mineralized but continuously converted into other compounds. ESI(+)-MS monitoring revealed that whereas the intensity of the ions of m/z 292/294 ([1 + H](+)) constantly decreased, there was the emergence of other ions of m/z 247/249, 197, 168, and 116 whose intensities simultaneously increased. Their structures were proposed on the basis of: (1) the data of their ESI(+)-MS/MS; (2) their high resolution m/z values; and (3) a plausible reactivity of the thiamethoxam molecule exposed to UV radiation in aqueous solution. Finally, these data allowed us to suggest a reaction route for the photodegradation of 1 in an aqueous medium.     

New insight on the investigation of the role of water in the solid-state structures of potassium croconate, K(2)C(5)O(5).2H(2)O, and its anhydrate

This work presents a comparative study of dihydrated and anhydrous forms of potassium croconate crystals by vibrational spectroscopy, X-ray powder diffraction, and thermogravimetry. These compounds have different colors (dihydrated is orange, and dehydrated is yellow) due to the presence of coordinated water molecules. X-ray diffraction patterns show that the unit cell of the yellow compound is smaller than that of the orange analogue, suggesting that the croconate ion layers are more closely bonded in this salt. The loss of water is reversible due to the potassium cation size which is intermediate between small (Li+ and Na+) and large (Rb+ and Cs+) alkaline metal ions. However, the hydrated compound (orange) is more stable, and with a small quantity of water the yellow compound is quickly converted to the orange compound. A diagnostic feature of the Raman spectrum for the orange (hydrated) and yellow (anhydrous) analogues is the singlet at 1240 cm(-1) in the former, assigned to a nu(CC) + delta(CCC) + nu(CO) + beta(CO) mode of E'2 symmetry, which splits in the yellow form to a doublet at 1256 and 1232 cm(-1).     

Combined investigation of bulk diffusion and surface exchange parameters of silver catalyst coated yttrium-doped BSCF membranes

The combined effect of minor yttrium doping and silver catalyst deposition on the surface kinetics (k(chem)) and bulk diffusion (D(chem)) of BSCF (Ba(0.5)Sr(0.5)Co(0.8)Fe(0.2)O(3-δ)) perovskite membranes was explored using electrical conductivity relaxation (ECR) and validated using oxygen permeation measurements. Yttrium doping of BSCF to form Ba(0.5)Sr(0.5)Co(0.8)Fe(0.175)Y(0.025)O(3-δ) (BSCFY) improved both the surface exchange kinetics and the bulk diffusion by an average of 44% and 177% respectively, supporting improved oxygen permeation measurements. The deposition of a silver catalyst on BSCFY further improved the surface kinetics by 63-450% at intermediate operating temperatures (600-750 °C), and reduced the activation energy from 163 to 90 kJ mol(-1). Interestingly, these improvements did not translate into enhanced oxygen fluxes for the silver coated thicker 0.5 and 1 mm membranes, indicating that the oxygen ion transport was limited by bulk diffusion. However, oxygen permeation measurements on catalyst-coated 0.3 mm-thick membranes yielded improvements of 20-35% in the range 600-900 °C. The silver catalyst was beneficial in overcoming surface kinetic limitations for the thinner 0.3 mm BSCFY membranes, thus suggesting that the critical thickness of BSCFY membranes lies around ～0.4 mm and validating the ECR measurements.     

Physical versus non-physical effective nuclear masses for non-adiabatic corrections to molecular spectra

Two types of developments for very accurate non-adiabatic corrections to rovibrational molecular energy levels, one of a formal nature and the other of a heuristic nature, lead to fundamentally different approaches for effective nuclear masses. The former yields effective masses that have non-physical interpretation at some ranges of nuclear distances. The later uses physical masses obtained from electronic structure calculations. This paper contains a brief review of the subject and proposes procedures to improve and generalize the heuristic approach. Comparisons are made of the results obtained by the two approaches for the H ${}_2$ molecule, since no further calculations were found with the proper accuracy, but some issues involving the HeH ${}^{+}$ ion and the water molecule are discussed. The conclusion is that the heuristic approach has many advantages over the formal one, namely, equivalent accuracy and physically grounded qualitative interpretation. But, moreover, it seems to be presently the only method that allows non-adiabatic calculations for well isolated states of larger molecules.