On the loss of cadmium, antimony and silver during dry ashing of biological material

Summary The loss of cadmium, antimony and silver during dry ashing of marine weeds, mussels and shrimps was studied with the aid of radioactive tracers. Except for antimony all biological material was labelled by uptake of the radioactive tracers by the organisms while still alive. At an ashing temperature of 500° C and below no significant loss by volatilization of these elements occurs. The results obtained at higher temperatures with cadmium show that the behaviour of this element may depend on the composition of the organic material. Retention on the wall of quartz crucibles did not cause serious losses.

---

Über den Verlust an Cadmium, Antimon und Silber bei der Trockenveraschung von biologischem Material

Zusammenfassung Mit Hilfe radioaktiver Tracer wurden die Verluste an Cadmium, Antimon und Silber bei der Trockenveraschung von Seetang, Muscheln und Krabben untersucht. Mit Ausnahme von Antimon wurden alle Materialien mit den Tracern durch Aufnahme im lebenden Zustand markiert. Bei Veraschungstemperaturen von 500° C und darunter konnten keine signifikanten Verluste durch Verflüchtigung der Elemente festgestellt werden. Das Verhalten von Cadmium bei höheren Temperaturen kann von der Zusammensetzung des organischen Materials abhängen. Verluste durch Haften an der Wand des Quarztiegels waren unbedeutend.

     

氧化电位溶出法测定水质和生物样品中的铜、铅、镉、锌、锰

在潭石酸-NaOH(pH=9)底液中,用银基汞膜电极作工作电极,以底液中的溶解氧作氧化剂,Cu~(2+)、pb~(2+)、Cd~(2+)、Zn~(2+)分别能产生灵敏的溶出峰。峰电流对浓度的线性范围依次为0.2～2800ng/ml、0.1～3400ng/ml、0.05～1400ng/ml、0.2～6100ng/ml。往上述底液中再加入适量的对氨基苯磺酸,Mn~(2+)亦可产生灵敏的电位溶出峰,线性范围为0.5～4800ng/ml。     

Cadmium speciation in Arabidopsis thaliana as a strategy to study metal accumulation system in plants

The strategy to identify cadmium deactivation mechanism in Arabidopsis thaliana has been developed using selective and sensitive hyphenated techniques. Cadmium concentrations, in main parts of the plant, were determined by ICP-MS and total amount was found as 0.43-0.44 μg g⁻¹ in leaves and 3.3-3.4 μg g⁻¹ in roots. Speciation of the metal complexes in cells was investigated by SEC-ICP-MS in order to estimate the accumulation process. Phytochelatins, desglycyl-phytochelatins and phytochelatins homologues lacking the N-terminal γ-linked glutamic acid were extracted from plant and were identified by RPLC-ESI-MS. Two-dimensional chromatography allowed to link the metal complexes separated by SEC with isoforms of phytochelatins analyzed by high resolution RPLC and confirm their significant responsibility for metal accumulation. The potential of the cadmium complexes speciation indicates that obtained results could be reliable source of knowledge to confirm the information coming from the well-known genomic sequence of Arabidopsis and to estimate the role of γ-glutamyl transpeptidase in metabolism of glutathione.     

石墨炉原子吸收法测定生物样品中镉的几种基体改进剂的比较

本文比较了磷酸二氢铵、氟化铵、硫酸铵、氯化钯、氯铂酸以及氯铂酸与多种有机酸的混合试剂在测定ＧＢＷ猪肝标准物质中镉时基体改进效果，其中，氯铂酸的基体改进能力最强，猪肝标准物质的回收率在９０％     

Polymeric Structure and Solid ~(31)P, ~(113)Cd NMR Spectra of Cadmium(II) Dialkyldithiophosphate (Alkyl = n-butyl and i-butyl)

Owing to the particular affinity toward metal ion and changeable dentation, dialkyldithiophosphates are commonly used ligands in preparation of the transition metal complexes with variable structures1. For instances relevant to this work, the IIB metal complexes defined crystallographically so far have provided the examples as follows2-12 (Scheme 1). Scheme 1 The frameworks of IIB metal complexes of dialkyldithiophosphate MMMMMMMMMM a b c d …     

Kinetic modelling of cadmium removal from phosphoric acid by non-dispersive solvent extraction

In this work it is reported that the kinetic modelling of the separation of cadmium from phosphoric acid by non-dispersive solvent extraction. Using Cyanex 302 as selective extractant, the extraction step was carried out in a hollow fibre module containing polypropylene fibres, whereas the concentration step required a ceramic module with tubular channels due to the high acidity of the backextraction agent. Application of the methodology previously reported by the authors led to the development of a kinetic model with three design parameters, i.e., equilibrium constant of the extraction reaction (K'_e = 6 × 10³ mol⁻²/l⁻²), membrane mass transport coefficient of the extraction module K_me=8.33×10⁻⁸ m/s) and of the backextraction module (K_ms=3.33×10⁻⁸ m/s), that described satisfactorily the behaviour of the separation-concentration system. Thus, in this work a new application of the non-dispersive solvent extraction technology is presented, characterising at the same time the behaviour and parameters of a new type of contactor, i.e., a tubular ceramic module.     

Development of an automated sequential injection on-line solvent extraction-back extraction procedure as demonstrated for the determination of cadmium with detection by electrothermal atomic absorption spectrometry

An automated sequential injection (SI) on-line solvent extraction-back extraction separation/preconcentration procedure is described. Demonstrated for the assay of cadmium by electrothermal atomic absorption spectrometry (ETAAS), the analyte is initially complexed with ammonium pyrrolidinedithiocarbamate (APDC) in citrate buffer and the chelate is extracted into isobutyl methyl ketone (IBMK), which is separated from the aqueous phase by means of a newly designed dual-conical gravitational phase separator. A metered amount of the organic eluate is aspirated and stored in the PTFE holding coil (HC) of the SI-system. Afterwards, it is dispensed and mixed with an aqueous back extractant of dilute nitric acid containing Hg(II) ions as stripping agent, thereby facilitating a rapid metal-exchange reaction with the APDC ligand and transfer of the Cd into the aqueous phase. The aqueous phase is separated in a second dual-conical gravitational phase separator, and 30 μl of it is entrapped and metered in a sample loop (SL) and subsequently introduced via air segmentation into the graphite tube for analyte quantification. The ETAAS determination is performed in parallel with the separation/preconcentration process of the ensuing sample. An enrichment factor of 21.4, a detection limit of 2.7 ng l⁻¹, along with a sampling frequency of 13 h⁻¹ were obtained at a sample flow rate of 6.0 ml min⁻¹. The precision (R.S.D.) at the 0.4 μg l⁻¹ level was 1.8% as compared to 3.2% when quantifying the organic extractant directly. The applicability of the procedure is demonstrated for the determination of trace levels of cadmium in three certified reference materials.     

Novel gallium-mediated C3-allylation of indoles and pyrroles in aqueous media promoted by Bu4NBr

A mild and efficient protocol for the coupling of indoles and pyrroles with allyl halides such as allyl bromide, crotyl bromide and propargyl bromide in the presence of gallium metal in a Bu₄NBr-DMF-H₂O system has been developed. The reaction is equally effective when cadmium is used in lieu of gallium and the corresponding 3-allyl indoles and 3-allyl pyrroles were obtained in almost comparable yields.     

镉从农业土壤向人类食物链的迁移

综述了镉在环境中的行为，在土壤－植物－人类系统中的迁移，由于粮食作物是镉进入人类食物链的主要来源，因此土壤污染的危害是全球性的，对决定农业系统中镉迁移动力学的关键过程、粮食作物中的镉含量、影响镉植物有效性的各类因子作了综述了讨论。     

Study of the concentration and separation of cadmium with microcrystalline phenolphthalein modified by crystal violet

A new method for cadmium separation and concentration with microcrystalline phenolphthalein modified by crystal violet (CV) was developed in the paper. In the presence of potassium iodide (KI) and CV, cadmium are quantitatively absorbed on microcrystalline phenolphthalein in the pH range 1.0-6.0 as the forms of water-insoluble ion-associated complexes (CdI₃⁻)·(CV⁺) and (CdI₄²⁻)·(CV⁺)₂. Effect of different parameters such as phenolphthalein amount, stirring time, the concentration of CV and KI, various salts and metal ions was studied in detail. During the present study, a significant enhancement of the extraction of cadmium was observed. Cd(II) can be completely separated from Zn(II), Fe(II), Co(II), Ni(II), Mn(II), Cr(III) and Al(III) in this microcrystalline system and well concentrated without the interference of these metal ions at high level. The possible reactive mechanism of cadmium concentration has been discussed. Analytical results obtained by this new method were very gratifying.