不同温度下KTP晶体的声表面波特性研究

针对KTP晶体的压电特性,利用克里斯托弗方程计算了20 ～ 140℃温度范围内Z切型传播角度为0～180°的声表面波速度、机电耦合系数、能流角.结果表明,在20℃,能流角为0°,传播角为90°的情况下,机电耦合系数最高达0.675;,是石英晶体的3倍左右;在140℃,能流角为0°,传播角为90°的情况下,机电耦合系数达到0.60;,约为石英晶体的2倍.     

谐振式检测器谐振腔对声表面波气相色谱仪灵敏度的影响

研究了谐振式检测器谐振腔对声表面波气相色谱仪灵敏度的影响。构建无液膜负载和有液膜负载下压电基片和金属指条结构的三维有限元模型,利用有限元方法提取不同周期结构的耦合模参量,结合P矩阵级联技术,推导出传感器灵敏度随检测器腔体结构改变的变化关系。实验制备了两种三换能器结构的声表面波谐振器,其输入换能器与输出换能器间距离分别为22.25倍波长和1.25倍波长,通过测试甲基膦酸二甲酯气体,验证理论计算结果。结果表明:缩短谐振器的谐振腔长度使器件中心处能量更为集中,有效地提高了声表面波气相色谱仪灵敏度。      

基于声表面波的氢气传感器*

将钯基材料对氢气分子的特异选择性吸附能力与声表面波的快速响应特点相结合,可实现一种快速、高灵敏和低功耗的氢气检测与报警技术。传感器由双通道差分式振荡器与沉积在传感器件表面的声表面波传播路径上的钯基气敏薄膜组成。为提升传感器响应速度,该文探讨了采用钯镍合金薄膜与钯铜纳米线作为气敏材料的氢气传感器响应特性,通过对气敏材料制备方法及参数的优化,研制了两种沉积不同钯基气敏材料的氢气传感器件,并对其性能进行了评测。实验测试结果表明:钯铜纳米线气敏材料由于具有大体积表面积比和多孔结构,大幅提高了SAW氢气传感器响应速度,针对浓度为10%、4%以及0.5%的氢气响应时间可达～2s。     

基于反射型延迟线结构的无线无源声表面波测温系统

从传感器核心元件及无线测温雷达的优化设计出发,研制了一种集成电子标签的高性能声表面波(SAW)无线无源测温系统。基于耦合模(COM)理论对作为传感元件的反射型SAW延迟线进行了优化设计,基于仿真结果,实验研制了采用YZ LiNbO_3石英基片的434 MHz反射型SAW延迟线,该器件是由一个换能器与8个反射器构成的反射型延迟线,其中3个反射器用于温度检测,另外5个反射器则用于采用相位编码的电子标签。测试结果显示所研制的反射型SAW延迟线具有良好的时域特性与较高的信噪比,并与理论仿真结果极为吻合。设计并研制了采用步进调频(FSCW)模式的测温雷达,利用高精度高低温箱对所研制的无线无源SAW测温系统进行了无线测试,系统表现出良好的线性特性,测温准确度达到了士1℃以内。      

CTAS和CNAS晶体的声表面波特性研究

本文计算了Ca3TaAl3Si2O14(CTAS)和Ca3NbAl3SiO14(CNAS)压电晶体的X,Y和Z切型的声表面波速度、机电耦合系数.计算结果表明:CTAS和CNAS机电耦合系数最高可达1.04;,是石英晶体(最大0.3;)三倍多,而CTAS晶体的声表面波速度(最小值约为3070 m/s)比石英(最小值为3200 m/s)小4.0;.给出声表面波特性比较好的切型,为CTAS和CNAS的声表面波应用提供了理论依据.     

零声表面波频率温度系数方向的硅酸镓镧晶体生长

采用提拉法生长了高质量、大尺寸、结构完整的声表面波零温度系数切向LGS晶体.XRD图谱显示,生长的晶体为单一相LGS晶体,晶格常数为a=0.816274 nm,c=0.509253 nm,密度为5.7463 g/cm3.压电常数、介电常数、热膨胀性能等与传统方向生长的晶体一致.用此方向生长的LGS晶体制作声表面波频率温度性能优化的切片,只需要垂直生长方向进行切割,可以大大简化晶体的加工工艺、提高LGS晶体的利用率,节省材料成本.     

移动简谐力作用下三维多孔饱和半空间的动力问题

研究了移动荷载作用下多孔饱和地基的动力问题.应用Fourier变换求解该问题的控制偏微分方程,考虑了荷载的移动速度及振动频率对多孔饱和地基动力响应的影响,重点研究了移动速度达地基表面波速时多孔饱和半空间的振动问题(马赫效应),并与相应的弹性介质的解答进行了比较.结果显示当移动速度与多孔饱和半空间的表面波速相近时,地基会产生很大的振动;当移动速度大于表面波速时,多孔饱和半空间的动力响应与弹性半空间的动力响应有较大的差别.     

Interaction of viscous wakes with a free surface

The interaction of laminar wakes with.free-surface waves generated by a moving body beneath the surface of an incompressible viscous fluid of infinite depth was investigated analytically. The analysis was based on the steady Oseen equations for disturbed flows.The kinematic and dynamic boundary conditions were linearized for the small-amplitude free-surface waves. The effect of the moving body was mathematically modeled as an Oseenlet.The disturbed flow was regarded as the sum of an unbounded singular Oseen flow which represents the effect of the viscous wake and a bounded regular Oseen flow which represents the influence of the free surface. The exact solution for the free-surface waves was obtained by the method of integral transforms. The asymptotic representation with additive corrections for the free-surface waves was derived by means of Lighthill‘s two-stage scheme. The symmetric solution obtained shows that the amplitudes of the free-surface waves are exponentially damped by the presences of viscosity and submergence depth.     

新型成膜法的SAW气体传感器聚合物膜的粘弹性分析

An analysis of the response of surface acoustic wave sensors coated with polymer film based on new coating deposition (self-assemble and molecularly imprinted technology) is described and the response formulas are hence deduced. Using the real part of shear modulus, the polymer can be classified into three types: glassy film, glassy-rubbery film and rubbery film. Experimental results show that the attenuation response is in better consistence with the simulation than in Martin's theory, but the velocity response does not accord with the calculation exactly. Maybe it is influenced by the experimental methods and environment. In addition, simulations of gas sorption for polymer films are performed. As for glassy film, the SAW sensor response increases with increasing film thickness, and the relationship between the sensor response and the concentration of gas is pretty linear, while as for glassy-rubbery film and rubbery film, the relationship between the sensor sensitivity and concentration of gas is very complicated. The ultimately calculated results indicate that the relationship between the sensor response and frequency is not always linear due to the viscoelastic properties of the polymer.     

铁电晶体KNbO3的研究进展

本文评述了近年来国内外对铁电晶体KNbO3在激光倍频和声表面波应用研究方面取得的显著进展,简述了新近生长该晶体的几种方法.最后对KNbO3晶体产业化前景作出了评估.