排序方式: 共有199条查询结果,搜索用时 31 毫秒
31.
基于颗粒动理学和化学动力学理论,建立化学链燃烧计算模型,数值模拟了耦合反应器内化学链燃烧过程,获得了反应器内流场特性和各组分分布规律,并很好地捕捉到了空气反应器中颗粒呈现出的非均匀环核流动结构。模拟结果同时给出了反应器中温度分布规律以及各出口颗粒质量流率和各组分浓度随时间的变化,为耦合反应器的设计优化提供了一定的依据。 相似文献
32.
王帅 《数学的实践与认识》2010,40(15)
对于题目中的几个问题,首先给出了一个计算并消除两组划痕数据之间平移误差和转动误差的精确算法,然后利用中值滤波+低通滤波+高斯滤波的方案来消除噪声和误差,最后对过滤后的数据进行分析,提取了一维特征向量并提出了比对特征相关系数作为检验弹头相似程度的标准. 相似文献
33.
鼓泡流化床因其较高的传热特性以及较好的相间接触已经被广泛应用于工业生产中,而对鼓泡流态化气固流动特性的充分认知是鼓泡流化床设计的关键.在鼓泡流化床中,气泡相和乳化相的同时存在使得床中呈现非均匀流动结构,而这种非均匀结构给鼓泡流化床的数值模拟造成了很大的误差.基于此,以气泡作为介尺度结构,建立了多尺度曳力消耗能量最小的稳定性条件,构建了适用于鼓泡流化床的多尺度气固相间曳力模型.结合双流体模型,对A类和B类颗粒的鼓泡流化床中气固流动特性进行了模拟研究,分析了气泡速度、气泡直径等参数的变化规律.研究表明,与传统的曳力模型相比,考虑气泡影响的多尺度气固相间曳力模型给出的曳力系数与颗粒浓度的关系是一条分布带,建立了控制体内曳力系数与局部结构参数之间的关系.通过模拟得到的颗粒浓度和速度与实验的比较可以发现,考虑气泡影响的多尺度曳力模型可以更好地再现实验结果.通过A类和B类颗粒的鼓泡床模拟研究发现,A类颗粒的鼓泡床模拟受多尺度曳力模型的影响更为显著. 相似文献
34.
以1,3-双咪唑丙烷,3,5-吡啶二羧酸和Zn(NO3)2·6H2O为原料,在水热条件下合成了一个新的Zn(Ⅱ)配合物{[Zn(bbi)(3,5-pdc)]·2H2O}n(1, bbi=1,3-二咪唑丙烷,3,5-pdc=3,5-吡啶二羧酸), 其结构和热性能经IR, 元素分析,X-射线单晶衍射和TGA表征。1属三斜晶系,P-1空间群,晶胞参数a=9.070 8(5) , b=10.213 1(8), c=11.266 7(7), α=82.138(6)°,β=89.368(5)°, γ=75.419(6)°。室温固态荧光测试结果显示,在330 nm激发态下,1在424 nm具有强烈的荧光发射峰。 相似文献
35.
We propose a new algorithm for wavefront sensing based on binary intensity modulation. The algorithm is based on the fact that a wavefront can be expended with a series of orthogonal and binary functions, the Walsh series. We use a spatial light modulator(SLM) to produce different binary-intensity-modulation patterns which are the simple linear transformation of the Walsh series. The optical fields under different binary-intensity-modulation patterns are detected with a photodiode.The relationships between the incident wavefront modulated with the patterns and their optical fields are built to determinate the coefficients of the Walsh series. More detailed and strict relationship equations are established with the algorithm by adding new modulation patterns according to the properties of the Walsh functions. An exact value can be acquired by solving the equations. Finally, with the help of phase unwrapping and smoothing, the wavefront can be reconstructed. The advantage of the algorithm is providing an analytical solution for the coefficients of the Walsh series to reconstruct the wavefront. The simulation experiments are presented and the effectiveness of the algorithm is demonstrated. 相似文献
36.
Degradation behavior of electrical properties of GaInAs (1.0 eV) and GaInAs (0.7 eV) sub-cells of IMM4J solar cells under1-MeV electron irradiation 下载免费PDF全文
In this work the degradation effects of the Ga_(0.7)In_(0.3)As(1.0 eV) and Ga_(0.42)In_(0.58)As(0.7 eV) sub-cells for IMM4J solar cells are investigated after 1-MeV electron irradiation by using spectral response and photoluminescence(PL) signal amplitude analysis, as well as electrical property measurements. The results show that, compared with the electrical properties of traditional single junction(SJ) GaAs(1.41 eV) solar cell, the electrical properties(such as Isc, Voc, and Pmax)of the newly sub-cells degrade similarly as a function of log ?, where ? represents the electron fluence. It is found that the degradation of Voc is much more than that of Isc in the irradiated Ga_(0.42)In_(0.58)As(0.7 eV) cells due to the additional intrinsic layer, leading to more serious damage to the space charge region. However, of the three types of SJ cells with the gap widths of 0.7, 1.0, and 1.4 eV, the electric properties of the Ga_(0.7)In_(0.3)As(1.0 eV) cell decrease largest under each irradiation fluence. Analysis on the spectral response indicates that the Jsc of the Ga_(0.7)In_(0.3)As(1.0 eV) cell also shows the most severe damage. The PL amplitude measurements qualitatively confirm that the degradation of the effective minority carrier life-time(τeff) in the SJ Ga_(0.7)In_(0.3)As cells is more drastic than that of SJ GaAs cells during the irradiation. Thus,the output current of Ga_(0.7)In_(0.3)As sub-cell should be controlled in the irradiated IMM4J cells. 相似文献
37.
运用直线法对含有不同参数支撑介质的平面型电磁带隙(EBG)结构进行了分析.概述了算法的实现过程,使用周期边界条件隔离出一个结构单元作为计算区域,并利用直线法得到了位函数在各层介质界面间的传输方程.通过联立场分量与位函数的变换关系和界面处切向场分量的连续性条件,建立了本征方程, 得到了表征该EBG 结构表面波带隙的本征模频带图.同时,使用该方法对含有不同介电常数、不同厚度支撑介质的表面波带隙进行了计算.通过对计算结果的分析,得到了支撑介质对平面型EBG 结构带隙特性影响的六条结论,为平面型EBG 结构的设计
关键词:
超媒质
光子带隙
周期结构
表面波 相似文献
38.
39.
介绍了氦冷固态增殖实验包层(HCCB TBM)系统,该系统主要由TBM 包层、氦冷却系统、氚提取系统、冷却剂净化系统、氚计量系统和中子活化系统等组成。TBM 结构安全分析主要包括电磁安全分析、热工水力安全分析和中子学安全分析,TBM 材料安全分析主要包括结构材料安全分析、阻氚涂层和氚处理等功能材料安全分析。对国内外学者在上述安全分析研究工作中取得的研究进展进行综述,并对TBM 未来的安全分析工作进行展望,以期对其安全设计提供参考。 相似文献
40.
为了解决相关滤波视觉跟踪算法在复杂场景中产生的跟踪漂移问题, 提出一种融合检测机制的相关滤波跟踪框架。利用时空正则化滤波器作为跟踪器, 同时使用线性核相关滤波器作为检测器。当跟踪器与目标进行相关计算得到的响应图为多个峰值时, 激活检测器, 对多个峰值进行相关匹配, 获得重检测结果; 同时, 使用平均峰值相关能量的滤波器模型更新策略得到更加可靠的检测器, 以达到提高跟踪精度和算法鲁棒性的目的。在OTB2015、Temple color 128和VOT2016数据平台上的实验结果表明, 与近年提出的性能较出色的跟踪算法相比, 本文算法在目标运动模糊、相似背景干扰和光照变化等复杂场景中具有更好的鲁棒性和准确性, 且跟踪精度和成功率上均有提高。 相似文献