Longitudinal leaky surface acoustic wave on Y-rotated cut quartz substrates

The properties of Quasi-longitudinal leaky surface acoustic wave(QLLSAW) on Y-rotated cut quartz substrates were presented. The phase velocity of QLLSAW on the quartz substrate along some orientations can be up from 6200 m/s to 7100 m/s, circa 100% above that of regular SAW. Both theoretical and experimental results show that QLLSAW propagating along some promising orientations for SAW devices are of small power flow angle and low tem-perature coefficient, for example, along the Euler angle (0°155.25°? 42°?, the measurements of phase velocity and temperature coefficient of delay of QLLSAW are 6201 m/s and 12.9 ppm/℃. The experimental results show that QLLSAW had little absorption by liquid loading on the substrate surface, which proved that the direction of particle motion is the same as wave vector and parallel to the surface of the substrates, i.e., the wave is of the properties of longitudinal wave.     

Spectral Anomalies in the Fraunhofer Diffraction Pattern

We study the spectral characteristics theoretically and experimentally in the Fraunhofer diffraction pattern formed by the diffraction of a spatially coherent, polychromatic light through a slit. It is found that the spectrum in some diffraction directions close to the singular direction is redshifted, compared to the spectrum of the incident polychromatic light, and blueshifted in other directions, and splits into two lines at the singular direction. We show that the experimental results are consistent with the theoretical expectations.     

高能、超短脉冲、可调谐激光器用掺镱氟磷酸盐玻璃研究进展

Yb^3 与其它稀土离子相比有最简单的能级结构，这使它具有一些独特的性质，如避免激发态吸收，消除上转换和浓度猝灭等，因此它是高能输出激光器介质的理想掺杂离子。氟磷玻璃综合了氟化物玻璃和磷酸盐玻璃的优点，可降低磷酸盐的声子能量，改善其易吸湿性；提高氟化物玻璃的物理化学性能等，这使它成为稀土掺杂可调谐光纤激光器的很好的掺杂介质。众多研究表明，Yb^3 掺杂氟磷玻璃是一种很有前途的激光工作物质。本文总结了Yb^3 掺杂氟磷玻璃的特点，性质，结构及存在的问题。     

制作高密度衍射光栅的光电式刻划控制的研究

高精度的光电式刻划控制系统是制作高密度母光栅的关键技术,以光栅干涉仪为控制核心,设计了光电式的光栅刻划控制系统,并对可能产生的加工误差进行了初步的分析;采用该控制系统的光栅刻划实践表明,所设计的光电式刻划控制系统已完全达到了高密度衍射光栅的亚微米栅距分度要求。     

半自由声场的全息重建和预测实验研究

半自由声场环境下的声源重建和声场预测研究对声全息技术走向实际应用具有非常重要的意义.在提出基于分布源边界点法的半自由声场全息重建和预测方法的基础上，对此展开了实验研究.并将重建和预测的结果与常规方法重建和预测的结果进行了比较和讨论，说明了重建预测过程中反射声压的影响和考虑反射声压的必要性，证明了所提出方法在解决半自由声场环境下存在地面反射时的声源重建和声场预测时的有效性和准确性.还提出了采用奇异值截断滤波和Tikhonov正则化方法来削弱测量误差的影响，从而进一步优化了重建结果，提高了全息成像的可信度. 关键词： 声全息 半自由场 边界点 声辐射 反射声     

衍/折射光学元件消二级光谱的设计

 采用衍/折射光学元件结合的方法，使用两种玻璃设计了星载用长焦距望远物镜，对其二级光谱进行了校正。具体介绍了衍/折透镜望远透镜消二级光谱方法、步骤。计算机模拟结果表明：校正后的望远物镜轴上位置色差小于0.08mm，满足使用要求，并且设计方法步骤简单。     

Studies on Synthesis and properties of Mg-Al-nitrate Layered Ouble Hydroxides

A positive Mg-Al-nitrate layered double hydroxides(LDHs) has been synthesized using a non-steady coprecipitation method.The shape.size,chemical composition,electrical property and anion exchange property of the positve nanoparticle were studied by SEM,XRD,FTIR,chemical analysis,spectroanalysis and meaxsuring of electrophoretic mobilities.Preliminary results show the positive nanoparticle is a promising precursor of polymer/LDHs nanocomposite.     

Compression Behaviour of Ni77P23 Amorphous Alloy up to 30.5 GPa

The compression behaviour of Ni77P23 amorphous alloy is investigated at room temperature in a diamond-anvil cell instrument using in-situ high pressure energy dispersive x-ray diffraction with a synchrotron radiation source. The equation of state is determined by fitting the experimental data according to the Birch-Murnaghan equation. It is found that the structure of Ni77P23 amorphous alloy is stable under pressures up to 30.5 GPa. Within the pressure range from zero to the experimental one, the pressure-induced structural relaxation is reversible.     

Viscosity Characteristic in Metallic Melts with Medium／Short-Range Order Structures

Viscosities and liquid structure of alloys Cu75Al25, Cu87Sn13 and Al-12.5%Si and pure metals Cu and Sn are investigated by using torsional oscillation viscometry and high temperature x-ray diffractometry. The viscosities of pure metals and eutectic alloy melts along with the short-range order structure are found to follow the Arrhenius law in a wide range of temperature above the liquidus. The breakpoints in Arrhenius plots emerge when the structures of alloy melts are transformed from the medium-range order structure to the short-range order structure. It has been found that the change of the viscosity of the metallic alloys is a characteristic of microstructure transformation in the related melts.