Rare‐Earth‐Metal Alkylaluminates Supported by N‐Donor‐Functionalized Cyclopentadienyl Ligands: C?H Bond Activation and Performance in Isoprene Polymerization

Homoleptic tetramethylaluminate complexes [Ln(AlMe₄)₃] (Ln=La, Nd, Y) reacted with HCp^NMe2 (Cp^NMe2=1‐[2‐(N,N‐dimethylamino)‐ethyl]‐2,3,4,5‐tetramethyl‐cyclopentadienyl) in pentane at ?35 °C to yield half‐sandwich rare‐earth‐metal complexes, [{C₅Me₄CH₂CH₂NMe₂(AlMe₃)}Ln(AlMe₄)₂]. Removal of the N‐donor‐coordinated trimethylaluminum group through donor displacement by using an equimolar amount of Et₂O at ambient temperature only generated the methylene‐bridged complexes [{C₅Me₄CH₂CH₂NMe(μ‐CH₂)AlMe₃}Ln(AlMe₄)] with the larger rare‐earth‐metal ions lanthanum and neodymium. X‐ray diffraction analysis revealed the formation of isostructural complexes and the C? H bond activation of one aminomethyl group. The formation of Ln(μ‐CH₂)Al moieties was further corroborated by ¹³C and ¹H‐¹³C HSQC NMR spectroscopy. In the case of the largest metal center, lanthanum, this C? H bond activation could be suppressed at ?35 °C, thereby leading to the isolation of [(Cp^NMe2)La(AlMe₄)₂], which contains an intramolecularly coordinated amino group. The protonolysis reaction of [Ln(AlMe₄)₃] (Ln=La, Nd) with the anilinyl‐substituted cyclopentadiene HCp^AMe2 (Cp^AMe2=1‐[1‐(N,N‐dimethylanilinyl)]‐2,3,4,5‐tetramethylcyclopentadienyl) at ?35 °C generated the half‐sandwich complexes [(Cp^AMe2)Ln(AlMe₄)₂]. Heating these complexes at 75 °C resulted in the C? H bond activation of one of the anilinium methyl groups and the formation of [{C₅Me₄C₆H₄NMe(μ‐CH₂)AlMe₃}Ln(AlMe₄)] through the elimination of methane. In contrast, the smaller yttrium metal center already gave the aminomethyl‐activated complex at ?35 °C, which is isostructural to those of lanthanum and neodymium. The performance of complexes [{C₅Me₄CH₂CH₂NMe(μ‐CH₂)AlMe₃}‐ Ln(AlMe₄)], [(Cp^AMe2)Ln(AlMe₄)₂], and [{C₅Me₄C₆H₄NMe(μ‐CH₂)AlMe₃}Ln(AlMe₄)] in the polymerization of isoprene was investigated upon activation with [Ph₃C][B(C₆F₅)₄], [PhNMe₂H][B(C₆F₅)₄], and B(C₆F₅)₃. The highest stereoselectivities were observed with the lanthanum‐based pre‐catalysts, thereby producing polyisoprene with trans‐1,4 contents of up to 95.6 %. Narrow molecular‐weight distributions (M_w/M_n<1.1) and complete consumption of the monomer suggested a living‐polymerization mechanism.     

Electron spin resonance on carbon nanotubes–polymer composites

Electron spin resonance investigations on styrene–polyisoprene–polystyrene block copolymer loaded with various amounts of multiwalled carbon nanotubes are reported. The temperature dependence of resonance line parameters in the range 290–425 K was analyzed. It was proved that the main resonance line represents a bottleneck of localized and delocalized electrons residing on carbon nanotubes. The temperature dependence of the g-factor and double integral of resonance spectra confirmed this interpretation. The temperature dependence of the resonance linewidth of composites containing various concentrations of nanotubes was explained by the thermally activated narrowing of the resonance spectra. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3406–3412, 2005     

Half-sandwich bis(tetramethylaluminate) complexes of the rare-earth metals: synthesis, structural chemistry, and performance in isoprene polymerization

The protonolysis reaction of [Ln(AlMe(4))(3)] with various substituted cyclopentadienyl derivatives HCp(R) gives access to a series of half-sandwich complexes [Ln(AlMe(4))(2)(Cp(R))]. Whereas bis(tetramethylaluminate) complexes with [1,3-(Me(3)Si)(2)C(5)H(3)] and [C(5)Me(4)SiMe(3)] ancillary ligands form easily at ambient temperature for the entire Ln(III) cation size range (Ln=Lu, Y, Sm, Nd, La), exchange with the less reactive [1,2,4-(Me(3)C)(3)C(5)H(3)] was only obtained at elevated temperatures and for the larger metal centers Sm, Nd, and La. X-ray structure analyses of seven representative complexes of the type [Ln(AlMe(4))(2)(Cp(R))] reveal a similar distinct [AlMe(4)] coordination (one eta(2), one bent eta(2)). Treatment with Me(2)AlCl leads to [AlMe(4)] --> [Cl] exchange and, depending on the Al/Ln ratio and the Cp(R) ligand, varying amounts of partially and fully exchanged products [{Ln(AlMe(4))(mu-Cl)(Cp(R))}(2)] and [{Ln(mu-Cl)(2)(Cp(R))}(n)], respectively, have been identified. Complexes [{Y(AlMe(4))(mu-Cl)(C(5)Me(4)SiMe(3))}(2)] and [{Nd(AlMe(4))(mu-Cl){1,2,4-(Me(3)C)(3)C(5)H(2)}}(2)] have been characterized by X-ray structure analysis. All of the chlorinated half-sandwich complexes are inactive in isoprene polymerization. However, activation of the complexes [Ln(AlMe(4))(2)(Cp(R))] with boron-containing cocatalysts, such as [Ph(3)C][B(C(6)F(5))(4)], [PhNMe(2)H][B(C(6)F(5))(4)], or B(C(6)F(5))(3), produces initiators for the fabrication of trans-1,4-polyisoprene. The choice of rare-earth metal cation size, Cp(R) ancillary ligand, and type of boron cocatalyst crucially affects the polymerization performance, including activity, catalyst efficiency, living character, and polymer stereoregularity. The highest stereoselectivities were observed for the precatalyst/cocatalyst systems [La(AlMe(4))(2)(C(5)Me(4)SiMe(3))]/B(C(6)F(5))(3) (trans-1,4 content: 95.6 %, M(w)/M(n)=1.26) and [La(AlMe(4))(2)(C(5)Me(5))]/B(C(6)F(5))(3) (trans-1,4 content: 99.5 %, M(w)/M(n)=1.18).     

Characterization of 2-methylglyceric acid oligomers in secondary organic aerosol formed from the photooxidation of isoprene using trimethylsilylation and gas chromatography/ion trap mass spectrometry

In the present work, we have characterized in detail the chemical structures of secondary organic aerosol (SOA) components that were generated in a smog chamber and result from the photooxidation of isoprene under high-NO(x) conditions typical for a polluted atmosphere. Isoprene high-NO(x) SOA contains 2-methylglyceric acid (2-MG) and oligoester derivatives thereof. Trimethylsilylation, in combination with capillary gas chromatography (GC)/ion trap mass spectrometry (MS) and detailed interpretation of the MS data, allowed structural characterization the polar oxygenated compounds present in isoprene SOA up to 2-MG trimers. GC separation was achieved between 2-MG linear and branched dimers or trimers, as well as between the 2-MG linear dimer and isomeric mono-acetate derivatives thereof. The electron ionization (EI) spectra of the trimethylsilyl derivatives contain a wealth of structural information, including information about the molecular weight (MW), oligoester linkages, terminal carboxylic and hydroxymethyl groups, and esterification sites. Only part of this information can be achieved with a soft ionization technique such as electrospray (ESI) in combination with collision-induced dissociation (CID). The methane chemical ionization (CI) data were used to obtain supporting MW information. Interesting EI spectral differences were observed between the trimethylsilyl derivatives of 2-MG linear and branched dimers or trimers and between 2-MG linear dimer mono-acetate isomers.     

Analysis of polystyrene-b-polyisoprene copolymers by coupling of liquid chromatography at critical conditions to NMR at critical conditions of polystyrene and polyisoprene

For the investigation of the molecular heterogeneity of polystyrene-b-polyisoprene block copolymers, a chromatographic separation method, namely liquid chromatography at critical conditions was developed. This method was coupled on-line with (1)H-NMR(where NMR stands for nuclear magnetic resonance) for the comprehensive analysis of the polystyrene-b-polyisoprene copolymers. The copolymers were synthesized by two different methods: sequential living anionic polymerization and coupling of living precursor blocks. While (1)H-NMR allows just for the analysis of the bulk chemical composition of the block copolymers, the coupling with liquid chromatography at critical conditions provides selective molar mass information on the polystyrene and polyisoprene blocks within the copolymers. The polyisoprene block molar mass is determined by operating at chromatographic conditions corresponding to the critical point of adsorption of polystyrene and size exclusion chromatography mode for polyisoprene. The molar mass of the polystyrene block is determined by operating at the critical conditions of polyisoprene. In addition to the molar mass of each block of the copolymers, the chemical composition distribution of the block copolymers was determined. By using the coupling of liquid chromatography at critical conditions to (1)H-NMR, one can also detect the homopolymers formed during synthesis. Finally the microstructure of the polyisoprene block in the copolymers was evaluated as a function of molar mass.     

改性甲基铝氧烷和烷基铝活化的新癸酸钕催化剂催化异戊二烯聚合

 考察了改性甲基铝氧烷(MMAO,溶于庚烷)和烷基铝(AlR3)活化的新癸酸钕(Nd(vers)3)催化剂对异戊二烯(IP)聚合反应的催化性能. 结果表明,以Al(i-Bu)2H替代部分MMAO,可在较低的MMAO用量(n(MMAO)/n(Nd)=20,总铝量n(Al)/n(Nd)=40)下明显提高Nd(vers)3-MMAO催化剂的活性,但所得聚合物中顺式-1,4结构的含量较低(约90%). Nd(vers)3, MMAO, Al(i-Bu)2H和Al(i-Bu)2Cl可在少量单体(n(IP)/n(Nd)=10)存在下配制成稳定的均相催化剂,该催化剂能在相对较低的MMAO用量(n(MMAO)/n(Nd)=15,总铝量n(Al)/n(Nd)=30)及较宽的Al(i-Bu)2Cl用量范围(n(Cl)/n(Nd)=0.5～7.0)内聚合异戊二烯,其活性明显高于单独以MMAO或Al(i-Bu)2H组成的催化剂,所得聚合物中顺式-1,4结构含量可达96%. 调节MMAO和Al(i-Bu)2H用量可控制聚合产物的分子量. 初步推测了该四元均相催化剂活性中心的生成过程.     

配方组份及改性工艺对碳五石油树脂性能的影响

以间戊二烯为主要单体, 其他碳五双烯烃(如异戊二烯)、碳五单烯烃(如2-甲基-1-丁烯、2-甲基-2-丁烯)等为改性单体, 无水三氯化铝(AlCl₃)为催化剂, 采用阳离子共聚法合成碳五石油树脂, 通过改变配方组分、添加剂量及温度等聚合条件, 考察各参数对树脂熔融黏度、蜡雾点、相对分子质量及分布等的影响. 研究结果表明: 产品的熔融黏度、蜡雾点及相对分子质量分布都随异戊二烯用量的增加而增大, 而随聚合温度及催化剂用量的增大而减小.     

异戊二烯和四氟乙烯-丙烯共聚物的光化学接枝反应

在紫外光作用下,二苯甲酮、蒽醌和安息香能通过夺氢反应使异戊二烯在四氟乙烯-丙烯共聚物中接枝,接枝反应按三重态自由基引发机理进行,接枝率随光照时间的增长而增加,但不会超过40%。和异戊二烯的自由基聚合反应不一样,接枝物中聚异戊二烯接枝链的微结构以3,4-和1,2-聚合为主,而前者以1,4-聚合为主。Ce⁺⁴及Fe⁺²-H₂O₂等氧化还原体系对该接枝反应不产生作用.极性溶剂四氢呋喃的加入,对接枝链微结构的影响很小。     

Co-Production of Isoprene and Lactate by Engineered Escherichia coli in Microaerobic Conditions

Lactate and isoprene are two common monomers for the industrial production of polyesters and synthetic rubbers. The present study tested the co-production of D-lactate and isoprene by engineered Escherichia coli in microaerobic conditions. The deletion of alcohol dehydrogenase (adhE) and acetate kinase (ackA) genes, along with the supplementation with betaine, improved the co-production of lactate and isoprene from the substrates of glucose and mevalonate. In fed-batch studies, microaerobic fermentation significantly improved the isoprene concentration in fermentation outlet gas (average 0.021 g/L), compared with fermentation under aerobic conditions (average 0.0009 g/L). The final production of D-lactate and isoprene can reach 44.0 g/L and 3.2 g/L, respectively, through fed-batch microaerobic fermentation. Our study demonstrated a dual-phase production strategy in the co-production of isoprene (gas phase) and lactate (liquid phase). The increased concentration of gas-phase isoprene could benefit the downstream process and decrease the production cost to collect and purify the bio-isoprene from the fermentation outlet gas. The proposed microaerobic process can potentially be applied in the production of other volatile bioproducts to benefit the downstream purification process.     

Dinuclear Rare‐Earth Metal Alkyl Complexes Supported by Indolyl Ligands in μ‐η2:η1:η1 Hapticities and their High Catalytic Activity for Isoprene 1,4‐cis‐Polymerization

Two series of new dinuclear rare‐earth metal alkyl complexes supported by indolyl ligands in novel μ‐η²:η¹:η¹ hapticities are synthesized and characterized. Treatment of [RE(CH₂SiMe₃)₃(thf)₂] with 1 equivalent of 3‐(tBuN?CH)C₈H₅NH ( L₁ ) in THF gives the dinuclear rare‐earth metal alkyl complexes trans‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH(CH₂SiMe₃)}Ind)RE(thf)(CH₂SiMe₃)]₂ (Ind=indolyl, RE=Y, Dy, or Yb) in good yields. In the process, the indole unit of L₁ is deprotonated by the metal alkyl species and the imino C?N group is transferred to the amido group by alkyl CH₂SiMe₃ insertion, affording a new dianionic ligand that bridges two metal alkyl units in μ‐η²:η¹:η¹ bonding modes, forming the dinuclear rare‐earth metal alkyl complexes. When L₁ is reduced to 3‐(tBuNHCH₂)C₈H₅NH ( L₂ ), the reaction of [Yb(CH₂SiMe₃)₃(thf)₂] with 1 equivalent of L₂ in THF, interestingly, generated the trans‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH₂}Ind)Yb(thf)(CH₂SiMe₃)]₂ (major) and cis‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH₂}Ind)Yb(thf)(CH₂SiMe₃)]₂ (minor) complexes. The catalytic activities of these dinuclear rare‐earth metal alkyl complexes for isoprene polymerization were investigated; the yttrium and dysprosium complexes exhibited high catalytic activities and high regio‐ and stereoselectivities for isoprene 1,4‐cis‐polymerization.