Surface-Polarity-Induced Spatial Charge Separation Boosts Photocatalytic Overall Water Splitting on GaN Nanorod Arrays

Photocatalytic overall water splitting has been recognized as a promising approach to convert solar energy into hydrogen. However, most of the photocatalysts suffer from low efficiencies mainly because of poor charge separation. Herein, taking a model semiconductor gallium nitride (GaN) as an example, we uncovered that photogenerated electrons and holes can be spatially separated to the nonpolar and polar surfaces of GaN nanorod arrays, which is presumably ascribed to the different surface band bending induced by the surface polarity. The photogenerated charge separation efficiency of GaN can be enhanced significantly from about 8 % to more than 80 % via co-exposing polar and nonpolar surfaces. Furthermore, spatially assembling reduction and oxidation cocatalysts on the nonpolar and polar surfaces remarkably boosts photocatalytic overall water splitting, with the quantum efficiency increased from 0.9 % for the film photocatalyst to 6.9 % for the nanorod arrays photocatalyst.     

Alloyed Crystalline CdSe1-xSx Semiconductive Nanomaterials – A Solid State 113Cd NMR Study

Solid-state NMR analysis on wurtzite alloyed CdSe_1−xS_x crystalline nanoparticles and nanobelts provides evidence that the ¹¹³Cd NMR chemical shift is not affected by the varying sizes of nanoparticles, but is sensitive to the S/Se anion molar ratios. A linear correlation is observed between ¹¹³Cd NMR chemical shifts and the sulfur component for the alloyed CdSe_1−xS_x (0<x<1) system both in nanoparticles and nanobelts (δ_Cd=169.71⋅X_S+529.21). Based on this correlation, a rapid and applied approach has been developed to determine the composition of the alloyed nanoscalar materials utilizing ¹¹³Cd NMR spectroscopy. The observed results from this system confirm that one can use ¹¹³Cd NMR spectroscopy not only to determine the composition but also the phase separation of nanomaterial semiconductors without destruction of the sample structures. In addition, some observed correlations are discussed in detail.     

[100]LiF单晶在60 GPa以内冲击加载下的高压屈服强度特性

获取光学窗口自身的高压强度特性是开展材料高压高应变率冲击响应行为精密测量和数据反演的重要基础。利用平板撞击和双屈服面法,通过冲击-卸载、冲击-再加载原位粒子速度剖面精细测量和数据反演,获得了约60 GPa范围内[100]LiF屈服强度特性随冲击压力的变化规律。结果表明:在实验压力范围内,[100]LiF的屈服强度随加载压力的提高而显著提高,压力硬化效应显著;同时,LiF在冲击加载下的屈服强度高于磁驱准等熵加载结果,应变率硬化效应强于热软化效应。采用Huang-Asay模型确定了可描述冲击加载[100]LiF强度特性的本构模型参数,为LiF在强度、相变、层断裂等加窗测量实验中的深入应用和数据准确解读提供了重要支撑。     

Undercooling and solidification of germanium melts studied by differential scanning calorimeter

~~Undercooling and solidification of germanium melts studied by differential scanning calorimeter~~     

吸流管道动力学模型的研究现状与展望

围绕吸流管道的稳定性与振动问题,对近年来的主要研究工作加以综述并提出预测,其中包括运动方程的归纳与讨论、管道自由端口处的流固耦合理论、定常流速下吸流管道的稳定性机理以及今后值得进一步研究的某些问题.     

甲烷在Mo/HZRP-1催化剂上无氧脱氢芳构化反应Ⅰ.Mo/HZRP-1催化剂的催化性能和积炭行为

用高 硅含磷五 员环 沸 石 分子 筛（ 商 品 代号 Ｈ Ｚ Ｒ Ｐ１） 作 为 载体 ，制 备 了 Ｍｏ／ Ｈ Ｚ Ｒ Ｐ１ 催化剂． 与 Ｍｏ／ Ｈ Ｚ Ｓ Ｍ５ 相比， Ｍｏ／ Ｈ Ｚ Ｒ Ｐ１ 对 甲烷无 氧脱氢芳 构化反 应也表现 出较好的 催化 性能 ． 实验过程 中，在反 应气中添 加 Ｎ２ 作 为内标 物，给出包 括甲烷 在 Ｍｏ／ Ｈ Ｚ Ｒ Ｐ１ 上 的结焦量 、转化率 及各产物选 择性在内 的总碳 物料平衡 计算结果 ． 考 察了不同 Ｍｏ 担 载量对催 化剂性 能和 积炭 行为 的影响； 重点考察 了不同 温度焙烧 后２０ ％ Ｍｏ／ Ｈ Ｚ Ｒ Ｐ１ 催化剂 的性能和 积炭行 为． 在 反应的初 始阶段 ，６ ％ Ｍｏ／ Ｈ Ｚ Ｒ Ｐ１ 表 现出 很 高 的 活 性： 反 应 进 行 ３０ ｍｉｎ 时， 甲 烷 转 化 率 为 １１ ％ ， 芳 烃 选 择 性 达８１ ％ ， 而催化 剂的结焦 选择性 仅为１２ ％ ． Ｂ Ｅ Ｔ， Ｎ Ｈ３ Ｔ Ｐ Ｄ 和 催 化反 应等 表 征结 果表 明： Ｍｏ 物种的数量 和状态， 分子筛的 酸强度和 酸量以 及分子筛 的孔道 结构是 决定 甲烷 无氧 脱氢 芳构 化反 应性能和积 炭行为 的关键因 素．     

蚯蚓蠕动过程中非光滑波纹形体表的力学分析

蚯蚓体表的形状是蚯蚓适应其生存环境和自然进化的结果．用力学分析方法，解释蚯蚓的多体节非光滑形态在其运动过程中所表现出的省力、节省能量的特性．计算结果表明具有波纹形表面的蚯蚓在蠕动过程中可以节省1．12%的纵向肌肉的收缩力，在运动过程中所消耗的能量也可以节省1％左右．     

中厚度圆浮板自由振动的一个解析解

本文提出了常水深环境下中厚度圆浮板自由振动的一个解析解.分析中考虑了板横向剪切变形的影响和横截面转动惯性效应,利用空气中中厚度圆板的振型叠加和势流理论,导得了浮板系统频率方程的解析式.由此可看出Y.Tanaka得到的圆形薄浮板的解是本文的特例.最后数值计算还给出了水深和钢缆刚度与频率的关系曲线.并指出了h/a在什么范围可以略去剪切变形和转动惯量的影响.     

圆盘状a-Co(OH)2的控制合成及其电化学性能

采用AAO模板及后处理方法合成了圆盘状a-Co(OH)2并研究了其电化学电容性能.在该合成方法中,先采用阳极氧化铝模板结合交流电沉积的方法获得钴纳米线,而后将其在碱液中通过溶解氧氧化生成终端产物.用红外光谱(FT-IR),X射线衍射(XRD)和场发射扫描电子显微镜(FE-SEM)表征了产物的结构和形貌;用循环伏安、恒电流充放电测试方法对其电化学性能进行了测试.此外,对圆盘状Co(OH)2的形成机理进行了初步探讨.结果表明,用此方法合成的Co(OH)2具有圆盘状形貌,属a相态,且表现出较好的电容特性.     

Luminescent properties of R doped Sr2SiO4:Eu(R=Li, Na and K) red-emitting phosphors for white LEDs

Sr₂SiO₄:Eu³⁺ and Sr₂SiO₄:Eu³⁺ doped with R⁺(R⁺=Li⁺, Na⁺ and K⁺) phosphors were prepared by conventional solid-state reaction and investigated by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and photoluminescence spectroscopy. XRD patterns and SEM reveal that the optimal firing condition for Sr₂SiO₄:Eu³⁺ was 1300 °C for 4 h. The excitation and emission spectra indicate that the phosphor can be effectively excited by ultraviolet (395 nm) and blue (466 nm) light and emits intense red light peaked at around 614 nm corresponding to the ⁵D₀→⁷F₂ transitions of Eu³⁺. In the research work, the effect of R⁺ contents on luminescence property and the Eu³⁺ concentration quenching process have also been investigated. The Eu³⁺ concentration quenching mechanism was verified to be a multipole-multipole interaction and the critical energy-transfer distance was calculated to be around 14.6 Å. The dopant R⁺(R⁺=Li⁺, Na⁺ and K⁺) as charge compensator in Sr₂SiO₄:Eu³⁺ can further enhance luminescence intensity, and the emission intensity of Sr₂SiO₄:Eu³⁺ doping Li⁺ is higher than that of Na⁺ or K⁺.