Encapsulation of Tetraazaannulenato Compounds in Matrix by Sol-Gel Process

The hybrid organic-inorganic catalyst constituted by {5,7,12,14-tetramethyldibenzo[b,i]-1,4,8,11-tetraaza[14]annulenato} nickel (II), NiTMTAA, encapsulated in an alumina matrix has been prepared. NiTMTAA was synthesized by the reaction of nickel acetate with o-phenylenediamine in the presence of 2,4-pentanedione under argon atmosphere. The alumina hybrid material was obtained by a non hydrolytic sol-gel route, through the condensation of aluminum chloride with diisopropylether in the presence of NiTMTAA. The material has been prepared through precipitation from a gel. Characterization of the alumina hybrid material has been performed by ultra violet-visible spectroscopy, electron spectroscopic imaging, surface area, atomic absorption, infrared spectroscopy, and thermogravimetric analysis. The ultra violet-visible absorption spectrum of the hybrid material has bands characteristic of the NiTMTAA compound showing that the structure of NiTMTAA has been preserved in the hybrid material. The new material has a surface area of 300 m²/g. The electron image was that of a non-crystalline microstructure. Comparison between the leaching of NiTMTAA from NiTMTAA adsorbed on commercial neutral alumina confirm that in the non-hydrolytic materials the NiTMTAA is entrapped and not only adsorbed on the alumina surface. The use of conventional hydrolytic sol-gel process leads to the complete leaching of NiTMTAA from matrix, underlining the importance of the non-hydrolytic alumina gel process in the matrix preparation. The new catalysts prepared were tested for their ability to catalyze the epoxidation of (Z)-cyclooctene using iodosylbenzene as oxygen donor, giving moderate yields in the epoxidation (40%), while the homogeneous NiTMTAA is inactive due to NiTMTAA bleaching. These results emphasize the effect of the non-hydrolytic alumina matrix to prevent chemical degradation of NiTMTAA.     

Phytochemical characterisation and bioprospection for antibacterial and antioxidant activities of Lippia alba Brown ex Britton & Wilson (Verbenaceae)

Ethanol extract and fractions obtained from fresh and dry aerial parts of Lippia alba were examined in order to determine their phytochemical composition, antioxidant capacity and antibacterial activities. The ethanol extracts and fractions exhibited an antioxidant effect by the DPPH assay, especially samples of fresh plant. HPLC analysis of the ethyl acetate fractions identified the presence of phenolic acids and flavonoids. The ethanol extract and fractions showed activity against reference and multidrug-resistant strains of Staphylococcus aureus and Enterococcus faecalis (MIC range 2000–250 μg/mL). The hexane and dichloromethane fractions of fresh plant showed better activity against reference strains of Escherichia coli (MIC of 250 and 125 μg/mL, respectively), but all extracts and fractions were less active against multidrug-resistant strains of all the Gram-negative species evaluated. The results showed that the extract and fractions of L alba aerial parts showed antibacterial activity, even against multidrug-resistant Gram-positive bacteria, and antioxidant effect (DPPH assay).     

The ground state tunneling splitting of malonaldehyde: accurate full dimensional quantum dynamics calculations

Benchmark calculations of the tunneling splitting in malonaldehyde using the full dimensional potential proposed by Yagi et al. are reported. Two exact quantum dynamics methods are used: the multiconfigurational time-dependent Hartree (MCTDH) approach and the diffusion Monte Carlo based projection operator imaginary time spectral evolution (POITSE) method. A ground state tunneling splitting of 25.7+/-0.3 cm(-1) is calculated using POITSE. The MCTDH computation yields 25 cm(-1) converged to about 10% accuracy. These rigorous results are used to evaluate the accuracy of approximate dynamical approaches, e.g., the instanton theory.     

Predicting structural models for silicon clusters

This article introduces an efficient method to generate structural models for medium-sized silicon clusters. Geometrical information obtained from previous investigations of small clusters is initially sorted and then introduced into our predictor algorithm in order to generate structural models for large clusters. The method predicts geometries whose binding energies are close (95%) to the corresponding value for the ground-state with very low computational cost. These predictions can be used as a very good initial guess for any global optimization algorithm. As a test case, information from clusters up to 14 atoms was used to predict good models for silicon clusters up to 20 atoms. We believe that the new algorithm may enhance the performance of most optimization methods whenever some previous information is available.     

Mid‐ and Near‐Infrared Spectroscopic Determination of Carbon in a Diverse Set of Soils from the Brazilian National Soil Collection

Abstract

Calibrations for soil carbon content measured by combustion (total carbon, TC) and chromate oxidation by a modified Walkley‐Black method (Walkley‐Black carbon, WBC) from the Brazilian National Soil Collection were made using Fourier‐transform near (1100 to 2500 nm; NIRS) and mid‐infrared diffuse reflectance (2,500 to 25,000 nm; DRIFTS) spectroscopy combined with partial least squares (PLS). Calibration sets of sample populations of different carbon ranges, soil taxonomic classes, and soil textural groups were established. These are for TC ranges between 0.4 to 555.0, 0.4 to 99.1, and 0.4 to 39.9 g kg^?1: for WBC 0.2 to 401.0, 0.2 to 66.0, and 0.2 to 66.0, and 0.2 to 30.0 g kg^?1: for soil taxonomic classes Ferralsols and Acrisols; and for soil textural groups very clayey, clayey, and medium textures were examined. Calibrations obtained for the largest TC and WBC ranges were better compared to the lower ones, but lower root mean squared deviation (RMSD) and relative difference (RD=RMSD/mean value) were found for the lower carbon ranges. Taxonomic soil class was not an adequate criterium for calibration set formation. Soil texture had effect on calibrations, especially using NIR, because of the particle size effect to which NIR was more sensitive than mid‐IR. In general, DRIFTS showed better performance than NIRS. NIRS only outperformed DRIFTS when used with calibration set fairly homogeneous in its particle size distribution. Results demonstrated that while calibrations can be developed using either DRIFTS or NIRS for even a very diverse set of soil samples, which will determine C over a wide range of concentrations inherent in such a diverse set, it is desirable to seperate sample populations by soil textural properties and choose the adequate spectral range (NIR or mid‐IR) based on the textural group, for calibration development to achieve more accurate results.     

Application of azide-containing molecules as modifiers of HTPB

Journal of Thermal Analysis and Calorimetry - Hydroxyl-terminated polybutadiene (HTPB) has been widely modified and copolymerized with azide substances to be applicable as an elastomer binder in a...     

Influence of the interface material layers and semiconductor energetic disorder on the open circuit voltage in polymer solar cells

Material layers at electrode/semiconductor interfaces are fundamental for the photovoltaic properties of polymer solar cells. The relationship between open‐circuit voltage ( V_OC ) and the work function ( φ ) of these interface layers is still a matter of debate. Simulations, together with experiments on over more than 20 cell architectures based on P3HT:PC₆₀BM, enabled us to analyze the physical dependence of V_OC on φ . In particular, when the work function of the contacts is well inside the gap we observe that performance depends strongly on even small variations of φ . On the other hand, when it approaches the energy levels of the semiconducting polymers, device operation becomes the most efficient and less sensitive to variations in φ . Furthermore, by varying the Gaussian density of states (DOS) of the active blend we were able to show that V_OC performance depends significantly also on the DOS. Our study based on the simultaneous variation of transport layers represents a promising method to optimize the design and performance of polymer solar cells. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 690–699     

Synthesis and characterization of dicyanovinyl-substituted thienylpyrroles as new nonlinear optical chromophores

[structure: see text] New dicyanovinyl-substituted 1-(alkyl)aryl-2-(2'-thienyl)pyrroles 2 were synthesized and characterized. The solvatochromic behavior of the synthesized compounds was investigated. All the derivatives showed reversible oxidation and reduction on the CV time scale. The hyperpolarizabilities (beta) of compounds 2 were measured using hyper-Rayleigh scattering. The results are among the highest beta values reported for donor-acceptor-substituted thienylpyrroles.     

Photochemically generated stable cation radical of phenothiazine aggregates in mildly acid buffered solutions

This work characterizes, for the first time, the photochemical behavior of the antipsychotic drugs thioridazine (TR), trifluoperazine (TFP), and fluphenazine (FP) influenced by the aggregation state of the molecules. Samples of monomeric and aggregated forms of phenothiazines were submitted to 20 min of irradiation at 254 nm for intervals of 1, 5, 10, 15, 20, or 25 days. In high phenothiazine concentrations, the irradiation led to the appearance of absorbance bands in the visible region peaking at 633 nm for TR and 509 nm for FP and TFP. In the dark, at room temperature and at 4 degrees C, these bands disappeared, after approximately 15 and approximately 60 min, respectively, but reappeared after a new irradiation session. These visible bands were assigned to stable cation radicals that were characterized by direct EPR measurements and by flash photolysis. Photogenerated stable cation radicals in the phenothiazine aggregates at room temperature are formed probably due to the stacking of the thiazine phenyl moieties. For the monomeric forms of phenothiazines, the spectral changes observed during the irradiation suggested the formation of sulfoxide and hydroxylated derivates. Oxidized derivates were detected by mass spectrometry of the aggregated forms of phenothiazines (>100 microM) only in the samples irradiated for more than 20 days. In contrast, monomeric phenothiazines were totally converted to the oxidized forms after 20 min of irradiation. Surface tension measurements of phenothiazines revealed that, in concentrations above 100 microM, the drugs formed aggregates. In the case of TR, small-angle X-ray scattering measurements indicated that this compound forms large lamellar-like aggregates in aqueous solutions.     

Aluminoxane–epoxi–siloxane hybrids waveguides

Boehmite–GPTS (GPTS-glycidoxypropyltrimethoxysilane) hybrids (BGS) have been prepared by the sol–gel methodology. Spectroscopic properties and structural features have been evaluated from the initial sols to xerogels as a function of composition. Eu³⁺-containing BGS samples were also prepared, and the Eu^{3+ 5}D₀ state emission quantum efficiency was observed to depend on the boehmite–siloxane interactions. Boehmite–siloxane heterocondensation was inferred from vibrational spectroscopy and ¹³C, ²⁹Si, and ²⁷Al nuclear magnetic resonance results. Unreacted epoxi groups could be identified in the final material being an important characteristic for the future applications. Good optical quality and mechanical properties lead to the preparation of thin films deposited on glass substrates by dip and spin-coating. Refractive index could be tuned by the relative boehmite and GPTS content. Waveguide properties have also been studied by m-lines spectroscopy and guided modes together with attenuation measurements suggest potential application of the prepared films in integrated optics.