Effective elastic moduli of two dimensional solids with distributed cohesive microcracks

Effective elastic properties of a defected solid with distributed cohesive micro-cracks are estimated based on homogenization of the Dugdale–Bilby–Cottrell–Swinden (Dugdale–BCS) type micro-cracks in a two dimensional elastic representative volume element (RVE).Since the cohesive micro-crack model mimics various realistic bond forces at micro-scale, a statistical average of cohesive defects can effectively represent the overall properties of the material due to bond breaking or crack surface separation in small scale. The newly proposed model is distinctive in the fact that the resulting effective moduli are found to be pressure sensitive.     

An Optimal Design Method Based on Small Amplitude Homogenization

An optimal design method for two materials based on small amplitude homogenization is presented. The method allows to use quite general objective functions at the price that the two materials should have small contrasts in their relevant physical parameters. The following two applications are shown: Stress constrained compliance minimization and defect location in elastic bodies.     

Direct chlorine determination in crude oils by energy dispersive X-ray fluorescence spectrometry: An improved method based on a proper strategy for sample homogenization and calibration with inorganic standards

Official guidelines to perform chlorine determination in crude oil are (i) American Society for Testing and Materials (ASTM) D6470, which is based on the extraction of water from the oil and subsequent determination of the chloride by potentiometry, (ii) ASTM D3230, that measures the conductivity of a solution of crude oil in a mixture of organic solvents and (iii) US Environmental Protection Agency (EPA) 9075 that uses energy dispersive X-ray fluorescence spectrometry to quantify chlorine and it is applicable for the range from 200 μg g^− 1 to percent levels of the analyte. The goal of this work is to propose method to quantify lower amounts of chlorine in crude oil using energy dispersive X-ray fluorescence spectrometry using a simple calibration strategy. Sample homogenization procedure was carefully studied in order to enable accurate results. The calibration curve was made with standards prepared by diluting aqueous NaCl standard in glycerin. The method presented a linear response that covers the range from 8 to at least 100 μg g^− 1 of chlorine. Chlorine in crude oil samples from Campos Basin - Brazil were quantified by the proposed method and by potentiometry after extraction of chlorine from the oil. Results achieved using both methods were statistically the same at 95% confidence level.     

Large deviation theory for a homogenized and “corrected” elliptic ODE

We study a one-dimensional elliptic problem with highly oscillatory random diffusion coefficient. We derive a homogenized solution and a so-called Gaussian corrector. We also prove a “pointwise” large deviation principle (LDP) for the full solution and approximate this LDP with a more tractable form. Applications to uncertainty quantification are considered.     

Semilinear parabolic problems in thin domains with a highly oscillatory boundary

In this paper, we study the behavior of the solutions of nonlinear parabolic problems posed in a domain that degenerates into a line segment (thin domain) which has an oscillating boundary. We combine methods from linear homogenization theory for reticulated structures and from the theory on nonlinear dynamics of dissipative systems to obtain the limit problem for the elliptic and parabolic problems and analyze the convergence properties of the solutions and attractors of the evolutionary equations.     

Virtual improvement of ice cream properties by computational homogenization of microstructures

Optimal shape design of microstructured materials has recently attracted a great deal of attention in materials science. The shape and the topology of the microstructure have a significant impact on the macroscopic properties. This paper presents different computational models of random microstructures, to virtually improve the physical properties of ice cream. Several sensory properties of this heterogeneous material issued from food industry are directly controlled by the elastic and thermal conducting ones. The material effective elastic and thermal conducting properties are obtained through direct large scale numerical simulations. The different formulations address the problem of finding the shape of the representative microstructural element for random heterogeneous media that increase the elastic moduli and thermal conductivity compared to existing products. The computational models are established using finite element method and images of virtual microstructures. In this paper we propose a new model of microstructures. This model is constructed with hexagonal prismatic rods and plates with volume fractions around 0.7 for the hard phase represented by hexagons of ice. A comparison between three two-phase elastic heterogeneous microstructures models is drawn. This illustrates the concept of design of microstructures using computational homogenization tools.     

Optimization of the collocation inversion method for the linear viscoelastic homogenization

The effective behaviour of linear viscoelastic heterogeneous material can be derived from the correspondence principle and the inversion of the obtained symbolic homogenized behavior. Various numerical methods were proposed to carry out this inversion. The collocation method, widely used, within this framework rests on a discretization of the characteristic spectrum in a sum of discrete lines for which it is necessary to determine the intensities and the positions by the minimization of the difference between the exact temporal function and its approximation. The classical method is based on a priori choice of the lines positions and on the optimization of their intensities. It is shown here that the combined optimization of the positions and the (positive) intensities lead to a minimization problem under constraints. In the simple case of an incompressible isotropic two-phase material, the assessment of the effective relaxation function with a continuum spectra or made up of discrete lines proves that the proposed method improves the predictions of the classical approach.     

Broadband acoustic cloaks based on the homogenization of layered materials

We present an analysis of acoustic cloaks based on the homogenization of two fluidlike materials, with an emphasis on periodically layered imperfect cloaks, by removing the singularities of the acoustic parameters required for ideal cloaks. The conditions that material layers should satisfy are systematically analyzed and critically discussed according to their feasibility.     

On the influence of local fluctuations in volume fraction of constituents on the effective properties of nonlinear composites. Application to porous materials

Composite materials often exhibit local fluctuations in the volume fraction of their individual constituents. This paper studies the influence of such small fluctuations on the effective properties of composites. A general asymptotic expansion of these properties in terms of powers of the amplitude of the fluctuations is given first. Then, this general result is applied to porous materials.As is well-known, the effective yield surface of ductile voided materials is accurately described by Gurson's criterion. Suitable extensions for viscoplastic solids have also been proposed. The question addressed in the present study pertains to nonuniform distributions of voids in a typical volume element or in other words to the presence of matrix-rich and pore-rich zones in the material. It is shown numerically and analytically that such deviations from a uniform distribution result in a weakening of the macroscopic carrying capacity of the material.