Filters compatible with isomorphism testing

Like the lower central series of a nilpotent group, filters generalize the connection between nilpotent groups and graded Lie rings. However, unlike the case with the lower central series, the associated graded Lie ring may share few features with the original group: e.g. the associated Lie ring can be trivial or arbitrarily large. We determine properties of filters such that every isomorphism between groups is induced by an isomorphism between graded Lie rings.     

配体保护下的Au_(20)团簇吸附和活化CO的理论研究

用密度泛函理论方法计算了CO分子吸附在有机配体聚乙烯吡咯烷酮poly(N-vinyl-2-pyrrolidone)(PVP)保护下的Au20团簇上的稳定构型的结构和性质。配体PVP通过物理吸附主要作用于Au20团簇的顶点位置。与Au20比较,配体的存在有利于CO的吸附和活化,其根本原因是PVP和CO在Au20表面分别作为供电子和吸电子基团产生的协同效应。中性及阴离子Au20团簇对配体和CO的吸附强度不同,前者对PVP吸附作用较强,后者对CO的吸附和活化作用较强。     

Microgels at droplet interfaces of water-in-oil emulsions—challenges and progress

Most of the commonly used microgels (MGs) are hydrophilic and tend to form oil-in-water emulsions. In this review, we discuss the function of MGs at the droplet interface in order to stabilize water-in-oil (w/o) emulsions. This topic addresses both interesting questions in fundamental research and a significant impact for applications, where the w/o emulsion type is of essential importance. Promising approaches to stabilize w/o emulsions with MGs are highlighted from different perspectives, ranging from novel MG modifications to assisted co-stabilization by adding soft or hard particles. We summarize the accumulated knowledge, evaluate the challenges and solutions, and highlight future research trends.     

One pot synthesis of chromium incorporated SBA-16 under acid medium-Application in the selective oxidation of benzyl alcohol derivatives

Cr-SBA-16 mesoporous silica heterogeneous catalysts (Si/Cr = 7, 14, and 28) were successfully synthesized by one-pot hydrothermal method at low acidic medium. The catalysts were characterized by means of X-ray diffraction (XRD), N₂ adsorption-desorption at 77 K, Fourier Transform Infrared (FTIR), X-ray photoelectron (XPS) and Diffuse Reflectance UV–Vis (DRS) Spectroscopies, Thermogravimetric analysis (TGA), Scanning electron microscopy (SEM) and Transmission electron microscopy (TEM) techniques. Herein, Cr-SBA-16 catalysts are evaluated in the selective catalytic oxidation of benzyl alcohol derivatives using H₂O₂ as oxidant. From XPS and UV–Vis (DRS) spectroscopies the molar ratios between Cr⁶⁺/Cr³⁺ are found to increase versus chromium loading in the following order: Cr-SBA-16(28) < Cr-SBA-16(14) < Cr-SBA-16(7). Hence the highest Cr⁶⁺ in tetrahedrally environment is observed for Si/Cr = 7. We demonstrated for the first time that the selective catalytic oxidation of benzyl alcohol (BzOH) using H₂O₂ over Cr-SBA-16 occurs through noncompetitive adsorption mechanism and the reaction is pseudo-first order to BzOH. The activity of the reaction depends on the symmetry of chromium species, herein, high activity is observed for tetrahedral chromium species in Cr-SBA-16(7). The absence of any chromium ions in the filtrate shows no chromium leaching from the silica framework.     

Two novel heterobimetallic metal-organic frameworks for the enhanced catalytic thermolysis and laser ignition of CL-20

The study of multiple complex catalytic mechanisms is currently one of the great scientific issues for the application of high-energy solid propellants. Two novel heterobimetallic metal-organic frameworks (MOFs), Ba₄Pb₄(CH₃CO₂)₈ [(CH₆CO₂)₄Pb](CH₃CO₂)₄ (PbBa-MOF) and Ba₂Ni(CO₂H)₆(OH₂)₄ (NiBa-MOF), were prepared via the solvothermal method, and their structures and composition were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), fourier transform infrared spectroscopy (FTIR) techniques and N₂ adsorption/desorption experiment. The thermal decomposition characteristics of the two MOFs and their catalytic performances on the hexanitro hexaazaisowurtzitane (CL-20) thermolysis were also studied by differential scanning calorimetr (DSC) and thermogravimetric-fourier transform infrared spectroscopy-mass spectrum (TG-FTIR-MS) methods. The results showed that the NiBa-MOF presented a lower initial decomposition temperature than the PbBa-MOF, and the difference of the MOFs structures affected the starting point of thermal decomposition. Compared with the pure CL-20, the thermolysis peak temperature and apparent activation energy (E_a) of the CL-20/PbBa-MOF mixture were decreased by 2.2 °C and 23.76 kJ?mol^?1, respectively. The E_a of CL-20/NiBa-MOF mixture was lower and 42.01 kJ?mol^?1, indicating the better catalytic activity of NiBa-MOF. The thermolysis catalytic mechanisms were studied by analyzing the transformation of gas products during the pyrolysis of mixtures. The effect of these two MOFs on the CL-20 thermolysis is primarily owing to the strong attraction of metal cations to electronics, bimetallic synergistic catalysis, and the release of active free radicals. Furthermore, the laser ignition and flame propagation features showed that these two MOFs reduced the minimum ignition power density and ignition delay time of the CL-20, and the flame becomes brighter and more luminous. The influence of the two MOFs on the flame bright spot of CL-20 based mixtures was described.     

Enhanced Electrocatalytic Activity of Methanol and Ethanol Oxidation in Alkaline Medium at Bimetallic Nanoparticles Electrochemically Decorated Fullerene-C60 Nanocomposite Electrocatalyst: An Efficient Anode Material for Alcohol Fuel Cell Applications

Direct alcohol fuel cells (DAFCs) have been recently playing a pivotal role in electrochemical energy sources and portable electronics. Research in DAFCs has proceeded to engage major attention due to their high catalytic activity, long-term stability, portability, and low cost. Herein, we present a facile surfactant-free route to anchor bimetallic Pd−W nanoparticles supported fullerene-C₆₀ catalyst (Pd-W@Fullerene-C₆₀) for high-performance electrooxidation of alcohols (methanol & ethanol) for DAFCs applications. Structural, elemental composition, and morphological analysis of the proposed catalyst were carried out using UV-Vis spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and energy-dispersive x-ray spectroscopy (EDX). Electrochemical properties such as electrochemical activity, electrochemical active surface area (ECSA), and long-term stability of the Pd-W@Fullerene-C₆₀ catalyst for ethanol and methanol oxidation in the alkaline medium were explored by using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and chronoamperometry (CA). Results revealed that the proposed catalyst showed enlarged ECSA, tremendous electrocatalytic activity, high poison tolerance limit, good reproducibility, and enhanced long-term stability as compared to the monometallic catalyst and commercially available catalyst (Pt/C) towards ethanol and methanol oxidation reaction. This enhanced potentiality of the Pd-W@Fullerene-C₆₀ catalyst is due to the synergistic effect of W−Pd nanoparticles and excellent electron kinetic from fullerene support material. These findings strongly suggest the Pd-W@Fullerene-C₆₀ catalyst as potential anode material for the alcohol oxidation reaction.     

Selective oxidation of alcohols with H2O2 catalyzed by zinc polyoxometalate immobilized on multi-wall carbon nanotubes modified with ionic liquid

In this work, acid functionalized multi-wall carbon nanotubes (MWCNTs) were modified with imidazolium-based ionic liquids. The selective oxidation of various alcohols with hydrogen peroxide catalyzed by[PZnMo₂W₉O₃₉]^5-, ZnPOM, supported on ionic liquids-modified with MWCNTs, MWCNTAPIB, is reported. This catalyst[ZnPOM@APIB-MWCNT], was characterized by X-ray diffraction, scanning electron microscopy (SEM) and FT-IR spectroscopic methods. This heterogeneous catalyst exhibited high stability and reusability in the oxidation reaction without loss of its catalytic performance.     

氮化SBA-16负载镍基催化剂的制备及其对甲烷二氧化碳重整反应的催化性能

通过软模板法合成了SBA-16分子筛,采用高温氨气氮化的方法使有序介孔硅材料中的氧原子部分被氮原子取代,得到氮化的SBA-16载体(SBA-16-N)。采用满孔浸渍法制备了镍基催化剂,并将制得的Ni/SBA-16和Ni/SBA-16-N催化剂用于甲烷二氧化碳重整反应。通过透射电镜、氮气物理吸附、X射线衍射、X射线光电子能谱和二氧化碳程序升温脱附等手段研究了载体和催化剂的结构,并利用热重分析对反应之后回收催化剂进行了表征。结果表明,高温氮化后的分子筛中掺入了氮元素,增加了载体的碱性,改善了载体对反应气体的吸附活化能力,增强了载体与金属之间的相互作用,从而提高了催化剂的活性和抗积炭性能。     

Characterization of derivations on B(X) by local actions

Let A be a unital algebra and M be a unital A-bimodule. A linear map δ : A →M is said to be Jordan derivable at a nontrivial idempotent P ∈ A if δ(A) ? B + A ? δ(B) =δ(A ? B) for any A, B ∈ A with A ? B = P, here A ? B = AB + BA is the usual Jordan product. In this article, we show that if A = Alg N is a Hilbert space nest algebra and M = B(H), or A = M = B(X), then, a linear map δ : A → M is Jordan derivable at a nontrivial projection P ∈ N or an arbitrary but fixed nontrivial idempotent P ∈ B(X) if and only if it is a derivation. New equivalent characterization of derivations on these operator algebras was obtained.     

Local regularity criteria of a suitable weak solution to MHD equations

We present a regularity condition of a suitable weak solution to the MHD equations in three dimensional space with slip boundary conditions for a velocity and magnetic vector fields. More precisely, we prove a suitable weak solution are H¨older continuous near boundary provided that the scaled mixed L_(x,t)~(p,q) -norm of the velocity vector field with 3/p + 2/q ≤ 2,2 q ∞ is sufficiently small near the boundary. Also, we will investigate that for this solution u ∈ L_(x,t)~(p,q) with 1≤3/p+2/q≤3/2, 3 p ∞, the Hausdorff dimension of its singular set is no greater than max{p, q}(3/p+2/q-1).