基于自适应桶中功率评价函数的光纤放大器相干合成实验研究

光纤激光光束合成技术被公认为是实现高亮度、高光束质量激光束的优秀方法, 而激光阵列间的倾斜像差是影响合成效果的重要因素. 针对当前光束合成中存在的倾斜校正量受限问题, 提出了基于自适应桶中功率(PIB)评价函数的倾斜控制策略. 搭建了两路2 W光纤放大器的相干合成实验平台, 利用自制的压电环光纤相位调制器和自适应光纤准直器分别实现锁相和倾斜像差校正, 验证了基于自适应PIB的倾斜控制策略的可行性, 并实现了相干合成. 关键词： 光纤激光阵列 倾斜控制 自适应桶中功率 相干合成     

Measurement of electric polarizabilities of light nucleus(nucleons)

The measurement of the electromagnetic polarizabilities have been given extensive attention, which is also a fresh field of the experimental nuclear physics. Now we will use the method - the light nucleus scattered by the heavy nucleus at energies below the Coulomb barrier to precisely and systematically measure the polarizabilities of the light nucleus. We hope we can solve the inconsistency among the results of the ³He polarizabilities and extract the ⁴He polarizabilities by our experiment. It is useful to mention that our experiment now is a supplement to the future experiment on SLEGS.     

Determination of the stellar reaction rate for 12C（α,γ）16O： using a new expression with the reaction mechanism

The astrophysical reaction rate of 12C(α, γ)16O plays a key role in massive star evolution. However, this reaction rate and its uncertainties have not been well determined yet, especially at T9=0.2. The existing results even disagree with each other to a certain extent. In this paper, the E1, E2 and total (E1+E2) 12C(α, γ)16O reaction rates are calculated in the temperature range from T9=0.3 to 2 according to all the available cross section data. A new analytic expression of the 12 C(α, γ)16 O reaction rate is brought forward based on the reaction mechanism. In this expression, each part embodies the underlying physics of the reaction. Unlike previous works, some physical parameters are chosen from experimental results directly, instead of all the parameters obtained from fitting. These parameters in the new expression, with their 3σ fit errors, are obtained from fit to our calculated reaction rate from T9=0.3 to 2. Using the fit results, the analytic expression of 12C(α, γ)16O reaction rate is extrapolated down to T9=0.05 based on the underlying physics. The 12C(α, γ)16 O reaction rate at T9=0.2 is (8.78 ± 1.52) × 1015 cm3s-1mol-1. Some comparisons and discussions about our new 12 C(α, γ)16 O reaction rate are presented, and the contributions of the reaction rate correspond to the different part of reaction mechanism are given. The agreements of the reaction rate below T9=2 between our results and previous works indicate that our results are reliable, and they could be included in the astrophysical reaction rate network. Furthermore, we believe our method to investigate the 12C(α, γ)16O reaction rate is reasonable, and this method can also be employed to study the reaction rate of other astrophysical reactions. Finally, a new constraint of the supernovae production factor of some isotopes are illustrated according to our 12C(α, γ)16O reaction rates.     

亚铁锌双金属氰化络合物固体催化剂催化合成生物柴油

Fe(Ⅱ)-Zn双金属氰化络合物固体催化剂用于一步催化酯交换和酯化反应制备生物柴油,具有易分离、流程简单,不受水毒性影响的优点。将水溶性金属氰化络合物亚铁氰化钾和金属化合物氯化锌反应,并结合有机配体叔丁醇制备了基于亚铁氰化锌的双金属氰化物络合物(DMC)。并研究了DMC固体催化剂催化菜籽油合成生物柴油过程中,助络合剂种类、催化剂用量、反应温度、醇油摩尔比、反应时间、体系中水和脂肪酸含量等因素对反应过程的影响。研究结果表明,在最佳实验条件下,甲酯产率最高可达98%。催化剂可循环使用,6次循环使用后回收率仍达93.45%,适宜工业化生产。     

大气环境下基于目标照明回光的视轴误差校正实验研究

理论分析了激光瞄准系统中视轴误差与目标照明回光的关系. 介绍了同时具备激光束发射与瞄准偏差校正功能的自适应光学器件––自适应光纤准直器的原理. 搭建了光束经200 m水平大气传输的激光瞄准实验平台. 基于二维目标和三维目标的照明回光, 利用随机并行梯度下降算法分别实现了不同初始视轴误差下的瞄准闭环校正. 实验结果表明, 闭环后二维目标和三维目标的视轴校正残差评价参数分别小于6%和10.8%, 校正精度均在理论范围内. 最后, 分析了算法参数对动目标瞄准的影响.     

过渡金属掺杂亚铁锌双金属氰化物催化合成生物柴油的研究

研究了掺杂过渡金属盐(La、Ce、Zr、Mn)对亚铁锌双金属氰化物(DMC)固体酸催化剂合成生物柴油的影响,并采用XRD、FT-IR、ICP、BET等方法对其进行结构和性能表征。结果表明,1%的镧、铈、锆、锰金属盐对催化剂的活性都有提高,其中,添加1%镧的DMC催化剂活性最高,在醇油摩尔比16∶1,反应温度160 ℃,催化剂加入量2%条件下,反应7 h,脂肪酸甲酯收率达到99.3%。过渡金属盐引入对催化剂的组成没有影响,但使得催化剂更加分散,颗粒粒径更小,比表面积变大,有利于催化剂和反应物的接触,从而提高了催化剂活性。     

光束整形在激光照明中的应用

提出利用光束整形技术提高激光照明均匀性、调节照明远场光斑尺寸的方法,用Easylaser激光仿真软件分析光束截断比对照明均匀性的影响,分析大气湍流条件下光束整形对照明均匀性的影响,并比较调节光束质量与光束整形对照明均匀性的影响。结果表明:光束整形具有调节照明激光远场光斑尺度及均匀性的能力,相位调节因子越大,整形后远场光斑半径越大、均匀性越好;光束截断比越大照明均匀性越好;弱湍流条件下,光束整形比调节光束质量的照明激光远场光斑均匀性更好。     

添加氢化钙合成高分子量聚对苯二甲酰对苯二胺的研究

研究使用氢化钙代替吡啶作为酸吸收剂合成高分子量聚对苯二甲酰对苯二胺(PPTA),并与以吡啶作酸吸收剂的聚合产物进行对比以评估该研究的应用前景.尝试以氢化钙代替吡啶,考察氢化钙的加入对TPC与PPD的聚合过程及聚合产物分子量和结构的影响.研究结果表明,添加氢化钙可以聚合出高分子量PPTA.元素分析、X-射线衍射及红外光谱分析结果表明,使用氢化钙和吡啶作为酸吸收剂合成的PPTA在元素含量和结构上均相同.热重分析结果表明,使用两种酸吸收剂得到的PPTA的热分解温度都在550℃左右.这些研究结果初步证明使用氢化钙代替吡啶进行高分子量PPTA工业聚合是可行的.     

压电式光纤相位调制器相移系数测试

介绍了压电式光纤相位调制器的相移系数理论公式,提出了基于杨氏双缝干涉原理的相移系数测量方法。对测量方法的可行性进行分析,通过实验对测量方法进行了验证。实际研制了一个基于压电陶瓷环的光纤相位调制器件,实验测得的相移系数与理论分析结果基本一致。利用研制的压电式光纤相位调制器实现了两路准直光束之间的相位锁定,在远场实现了相干合成,干涉条纹可见度从3%提升至43%。     

Experimental demonstration of single-mode fiber coupling using adaptive fiber couplerExperimental demonstration of single-mode fiber coupling using adaptive fiber couplerExperimental demonstration of single-mode fiber coupling using adaptive fiber couplerExperimental demonstration of single-mode fiber coupling using adaptive fiber coupler

Coupling plane wave into a single-mode fiber （SMF） with high and steady coupling efficiency is crucial for fiber- based free-space laser systems, where random angular jitters are the main influencing factors of fiber coupling. In this paper, we verified a new adaptive-optic device named adaptive fiber coupler （AFC） which could compensate angular jitters and improve the SMF coupling efficiency in some degree. Experiments of SMF coupling under the angular jitter situation using AFC have been achieved. Stochastic parallel gradient descent （SPGD） algorithm is employed as the control strategy, of which the iteration rate is 625 Hz. In closed loop, the coupling efficiency keeps above 65% when angular errors are below 80/3tad. The compensation bandwidth is 35 Hz at sine-jitter of 15 ~rad amplitude with average coupling efficiency of above 60%. Also, experiments with simulated turbulence have been studied. The average coupling efficiency increases from 31.97% in open loop to 61.33% in closed loop, and mean square error （MSE） of coupling efficiency drops from 7.43% to 1.75%.