ACM-02型COD仪分光光度法快速测定废水中COD

水样在165℃下密封消解15 min,用ACM-2型COD仪测定.实验结果表明,本法既快速又节省试剂,加标回收率和相对标准偏差均能满足质量控制要求,具有一定适用性.     

基于辐射光谱法的高温颗粒辐射传热参数在线测量方法研究

针对在高温燃烧环境中的颗粒辐射传热问题,基于普朗克辐射定律,提出了用于高温颗粒辐射传热参数在线测量的辐射光谱法,根据高温颗粒可见波段辐射光谱随波长变化情况,通过参数拟合方法直接获得颗粒温度及辐射强度等辐射传热参数。为验证该方法测量准确性,搭建了高温黑体炉辐射测量系统,实验测量结果显示：温度测量值与设定温度相对偏差小于3%;辐射强度测量值与理论计算值相对偏差小于5%。以此为基础,设计了应用于高温燃烧环境下的颗粒辐射传热参数测量的水冷结构探针,并利用该探针开展了高温燃烧环境气固两相流200～1 100 nm波段辐射光谱测量,基于上述方法,直接获得了高温颗粒温度、辐射强度等辐射传热参数沿截面分布情况,有效剥离了高温气体对流传热的影响,为高温颗粒辐射传热研究提供数据支撑。     

基于辐射光谱法的高温颗粒辐射传热参数在线测量方法研究（英文）

针对在高温燃烧环境中的颗粒辐射传热问题,基于普朗克辐射定律,提出了用于高温颗粒辐射传热参数在线测量的辐射光谱法,根据高温颗粒可见波段辐射光谱随波长变化情况,通过参数拟合方法直接获得颗粒温度及辐射强度等辐射传热参数。为验证该方法测量准确性,搭建了高温黑体炉辐射测量系统,实验测量结果显示:温度测量值与设定温度相对偏差小于3%;辐射强度测量值与理论计算值相对偏差小于5%。以此为基础,设计了应用于高温燃烧环境下的颗粒辐射传热参数测量的水冷结构探针,并利用该探针开展了高温燃烧环境气固两相流200～1 100nm波段辐射光谱测量,基于上述方法,直接获得了高温颗粒温度、辐射强度等辐射传热参数沿截面分布情况,有效剥离了高温气体对流传热的影响,为高温颗粒辐射传热研究提供数据支撑。     

结合吸收光谱与互相关法的燃气速度测量方法研究

针对可调谐半导体激光器吸收光谱(TDLAS)基于多普勒效应测速方法在燃气流速测量中频移量小、误差较大的问题,提出了结合固定波长吸收光谱法与互相关法的燃气速度测量方法。考虑碳氢燃料燃烧产物特点,选取H₂O分子7 185.597 cm-1吸收谱线,通过布置上下游两束固定波长吸收光谱测点,分析两信号的互相关特性来计算得到燃气速度。利用平面火焰炉实验系统对该方法测量燃气速度开展实验研究,获得了变工况下燃气速度随时间的变化情况。在相同工况下开展数值计算,将测量结果与数值模拟计算结果进行对比,相对偏差不超过8%。同时将该方法初步应用于煤油燃料火箭基组合循环发动机(RBCC)的高速羽流速度测量,获得了上下游探测器脉动信号,通过互相关分析计算得到了羽流速度,验证了该方法的可行性。实验结果表明,该燃气速度测量方法具有测量范围宽、测量精度高,环境干扰小等优点。提出的方法为发动机燃气速度测量提供一种简单可靠的测量方法。     

Local structure-preserving methods for the generalized Rosenau-RLW-KdV equation with power law nonlinearity

Local structure-preserving algorithms including multi-symplectic, local energy-and momentum-preserving schemes are proposed for the generalized Rosenau–RLW–Kd V equation based on the multi-symplectic Hamiltonian formula of the equation. Each of the present algorithms holds a discrete conservation law in any time–space region. For the original problem subjected to appropriate boundary conditions, these algorithms will be globally conservative. Discrete fast Fourier transform makes a significant improvement to the computational efficiency of schemes. Numerical results show that the proposed algorithms have satisfactory performance in providing an accurate solution and preserving the discrete invariants.     

基于PSIM机载大视场宽谱段偏振光谱成像系统光学设计

为满足偏振光谱成像探测中对于大视场、宽谱段技术要求,设计了一种基于偏振强度调制技术(PSIM)的宽谱段大视场偏振光谱成像仪。针对前置望远镜组,文中对现有国内玻璃材料消色差分析,优选了可见至短波红外的复消色差玻璃,通过控制镜组中PSIM模块光线角度,实现大视场内在PSIM模块上的入射角度需求。结合分析结果,采用光学设计软件优化设计。设计结果表明,前置望远系统能够实现波段为400～1 700 nm,视场角为72°,焦距为20 mm, F数为4的高质量成像,全谱段内探测器截止频率处传递函数优于0.4, PSIM模块上最大入射角度为±4.99°,有效保证了各视场内偏振调制的一致性。后置光谱分光系统采用基于Offner结构的凸面光栅,优化结果显示各波段点列图均小于一个像元,在探测器奈奎斯特频率处中心波长的MTF达到0.6,各项指标均满足设计要求。本文对于基于PSIM宽谱段偏振光谱成像仪器的工程化具有很重要的现实意义,对宽谱段光学系统消色差设计也具有一定指导意义。     

Effects of Depolarization Field and Interfacial Coupling on the Polarization of Ferroelectric Bilayers

A ferroelectric bilayer model considering depolarization field and interfacial coupling is proposed and the expression of the depolarization field is derived. The spatial profiles of spontaneous polarization and hysteresis loops are calculated using the numerical method with and without considering the depolarization field. The effects of the depolarization field and interfacial coupling on the polarization of second-order ferroelectric bilayers are studied systematically. When interfacial coupling is ferroelectric coupling, the interface spontaneous polarization increases and the area of hysteresis loop becomes larger with increasing coupling. When interfacial coupling is antiferroelectric coupling, the depolarization field makes the central loop become smaller and the shape of the hysteresis loop becomes steep. Meanwhile, as interfacial coupling increases, the outer loops stretch further out horizontally and the size of the central loop widens.     

Molecular Dynamics Study of Stability of Solid Solutions and Amorphous Phase in the Cu-Al System

The relative stability of fee and bcc solid solutions and amorphous phase with different compositions in the Cu-Al system is studied by molecular dynamics simulations with n-body potentials. For CU1-xAlx alloys, the calculations show that the fee solid solution has the lowest energies in the composition region with x 〈 0.32 or x 〉 0.72, while the bcc solid solution has the lowest energies in the central composition range, in agreement with the ball-milling experiments that a single bcc solid solution with 0.30 〈 x 〈 0.70 is obtained. The evolution of structures in solid solutions and amorphous phase is studied by the coordination number （CN） and bond-length analysis so as to unveil the underlying physics. It is found that the energy sequence among three phases is determined by the competition in energy change originating from the bond length and CNs （or the number of bonds）.     

超导器件在军事和工程化方面的研究及应用进展综述(上)

对超导器件在国内外军事领域上的研究和应用进展进行了综述,分析了目前我国超导器件研制以及在武器装备上应用所面临的主要问题,提出了解决的办法,并重点介绍了中国电子科技集团公司第16所以及中电集团低温电子技术研发中心的研究成果,并提出了加快我国超导器件在武器装备上应用的建议。     

适用于非常规工作环境中热释电型激光能量计的研制

现有的激光能量计传感器灵敏度系数都与其所处环境温度有关,在-50℃～70℃的温度范围内,灵敏度偏差较大,直接影响测量结果。为了达到消除环境温度的影响,采取在不同环境温度下对热释型能量计的灵敏度进行校准的研究方法。该校准方法与普通激光能量计的校准方法的不同之处在于对热释电型能量计进行校准时,温度由室温扩展到-50℃～70℃的温度范围。利用环境试验箱,每隔10℃固定一个温度点,进行激光能量的测量实验,得到各个温度点所对应的灵敏度修正系数,再借助最小二乘法建立起各个温度点上能量计灵敏度系数同环境温度的函数关系,从而实现了-50℃～70℃的温度范围内激光能量的准确计量。研制能直接工作于非常规工作环境下的热释电型激光能量计,对解决激光能量测量的外场需求有一定现实意义。