气体放电击穿过程的物理和数值研究

本文对低气压（１０＾－２Ｐａ）热阴极气体放电的击穿过程给出了物理描述和相应的双流体数学型，并发展了一种选择和调整未知初始条件的有效算法，可以通过伴随试射法得到对初始条件十分敏感的非线性两点边值常微分方程组的数值解，从而给出这类气体放电中击穿过程的定量描述。     

小间隙高放大多丝室及其放电机制

对以强猝灭气体工作的小间隙多丝室及其放电机制进行了研究,实验表明,因为工作在饱和模式区,这种室同时具有很高的气体放大和相当快的时间特性.文中探讨了放电机制,雪崩中空间电荷效应以及电离光子的产生和作用是重要的因素,而其中后一因素又受到强猝灭气体的抑制.     

Ohmic Radio-Frequency Synergy Current Drive and Transformer Recharging Experiments in the HT-7 Tokamak

Lower hybrid current drive (LHCD) experiments for investigating the interaction between lower hybrid (LH) wave and residual dc electric field were performed in extensive plasma parameter ranges in the HT-7 superconducting tokamak. The experimental results are well fitted to the Karney-Fisch theory on the efficiency of LH waves energy converted to poloidal magnetic field energy. The fraction of absorbed LH power is about 0.75 for the HT-7 machine, and the upshift of the LH-wave parallel refraction index during LHCD experiments have been derived by the optimizing fitting parameters. The LH wave is also used for the transformer recharging when the plasma current is maintained unchanged. The highest efficiency about 7% has been achieved in HT-7 machine.     

25MeV／u^6He十^9Be破裂反应的α碎片发射

测量了在25MeV／u^6He轰击^9Be靶的破裂反应产生的α碎片双微分截面及角分布，并在Ser—ber模型的框架下计算了在破裂反应中衍射破裂与擦去过程的贡献，并对结果进行了讨论．结果表明基于包含衍射破裂和擦去过程的Serber模型可以对^6He的直接反应进行较好地描述，擦去过程的贡献远大于衍射破裂的贡献．相对于^6Li而言，^6He较大的去2n微分截面源于它的弱束缚特性。     

HL-2A装置真空系统

现代核聚变实验装置要求的真空系统必须实现以下主要功能：（1）装置真空室的零部件及总体抽空和检漏；（2）真空室的烘烤除气（H2O）；（3）辉光放电清洗和面对等离子体部件的锻炼及原位处理；（4）边缘粒子的抽运与控制；（5）等离子体放电实验运行。     

Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang     

毛细管放电X光激光中的预脉冲研究

 为研究毛细管放电X光激光中预脉冲放电对增益的影响，用简化的XDCH程序，模拟计算了聚乙烯毛细管充Ar气、2μs脉宽的预脉冲放电过程，把预放电之后的等离子体温度、密度和电离度作为初始条件，输入XDCH程序，进行40kA典型主脉冲放电的计算模拟，给出了一些典型预放电幅度下的增益和电子密度分布情况。比较分析的结果发现，对2μs脉宽的预脉冲，100A的电流将得到较好的增益，并且预言激光线时间谱可能出现双峰结构，空间谱会出现环状结构。     

Calculation of the Safety Factor of the Ohmic HL-2A Single Null Divertor Discharge

The safety most important factor profile is one of the the plasma discharge. For limiter configuration, people usually use the following cylindrical approximation formula to calculate it q（r）=5r^2BT/RIp where r is the minor radius of the plasma toms, R is the major radius （in m） , BT is the toroidal magnetic field （in T）, Ip is the total toroidal current（in MA）.     

雷电的形成威力及预防

雷电灾害严重危及生命和财产的安全。因此，了解雷电成因，既有助于认识雷电的危害性，又可加强人类对雷电的防护。