Enhanced ethanol sensing properties of WO3 modified TiO2 nanorods

Pristine and WO₃ decorated TiO₂ nanorods (NRs) were synthesised to investigate n-n-type heterojunction gas sensing properties. TiO₂ NRs were fabricated via hydrothermal method on fluorine-doped tin oxide coated glass (FTO) substrates. Then, tungsten was sputtered on the TiO₂ NRs and thermally oxidised to obtain WO₃ nanoparticles. The heterostructure was characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX) spectroscopy. Fabricated sensor devices were exposed to VOCs such as toluene, xylene, acetone and ethanol, and humidity at different operation temperatures. Experimental results demonstrated that the heterostructure has better sensor response toward ethanol at 200 °C. Enhanced sensing properties are attributed to the heterojunction formation by decorating TiO₂ NRs with WO₃.     

Surface oxidized iron-nickel nanorods anchoring on graphene architectures for oxygen evolution reaction

Surface oxidized iron-nickel nanorods coupling with reduced graphene architectures (FeNi-O-rGA) are successfully constructed via hydrothermal, freeze-drying, and thermal activation approaches. The hierarchical structure can provide lots of pathways for fast ion diffusion and charge transfer, and expose abundant catalytic sites. Meanwhile, the activity of FeNi-O-rGA is boosted by the optimized metal-oxygen bond strength in FeNi₃ alloys. Partial oxidized FeNi nanorods are strongly coupled with rGA by the formation of metal-O-C bonds, which can impede the aggregation of FeNi₃ alloys and increase the utilization of active sites. The special structure and partially oxidized FeNi nanorods for FeNi-O-rGA can result in excellent OER activity and catalytic stability. Only 215 mV of overpotential is required to drive the current density of 10 mA/cm² as well as the Tafel slope of 50.9 mV/dec in 1 mol/L KOH. The change of surface chemistry of FeNi-O-rGA is confirmed by XPS after the OER test, which indicates the highly catalytic stability of FeNi-O-rGA due to the formation of intermediate metal oxyhydroxide.     

基于铱纳米棒的电致化学发光生物传感器用于多巴胺检测

铱(Ⅲ)配合物差的水溶性限制了其在电致化学发光(ECL)领域的应用。该文用聚(苯乙烯-马来酸酐)(PSMA)羧基功能化三(2.苯基吡啶)铱(Ⅲ)(Ir(ppy)3)合成水溶性铱纳米棒(Ir NDs)。在共反应试剂三丙胺(TPrA)存在下,Ir NDs 表现出优良的ECL性能。借助多巴胺(DA)对Ir NDs-TPrA体系ECL的高效猝灭作用,实现了对DA的高灵敏检测,线性范围为2.0×10-8~4.0×10-4 mol/L,检出限为6.3×10-9 mol/L。羧基功能化的Ir NDs为铱(Ⅲ)配合物在ECL领域的应用提供了理想平台,也为DA的检测提供了新方法。     

作为表面增强拉曼光谱基底的高度均匀Au纳米棒的构筑及对福美双的检测

采用种子生长法制备Au纳米棒(GNRs),随后进行组装和煅烧得到单层致密堆积的GNRs薄膜。在煅烧过程中,组装所需有机物在煅烧过程中分解,从而使得GNRs表面具有较高的清洁度。研究中发现,煅烧前后金纳米棒表面的间隙进一步提高,增强了其SERS(表面增强拉曼光谱)活性。为了研究其SERS活性,选择了2种探针分子以研究其灵敏度和均匀性,发现其具有较高的灵敏度和高的信号稳定性。随后将所制备的SERS基底成功用于检测超低浓度的农药分子。     

纳米金刚石掺混纳米氧化锌的场发射特性

利用水热法制备了菊花状的氧化锌纳米棒,并进行表征,将纳米氧化锌掺入纳米金刚石中配制成电泳液,超声分散后电泳沉积到钛衬底上,再经热处理后进行场发射特性的测试.结果表明:未掺混的金刚石阴极样品的开启电场为7.3V/μm,在20V/μm的电场下,场发射电流密度为81μA/cm2;掺混后阴极样品的场发射开启电场降低到4.7~6.0V/μm,在20V/μm电场下,场发射电流密度提高到140~158μA/cm2.原因是纳米ZnO掺入后,增强了涂层的电子输运能力、增加了有效发射体数目,提高了场增强因子β,而金刚石保证了热处理后涂层与衬底的良好键合,形成了欧姆接触,降低了场发射电流的热效应.场发射电流的稳定性随掺混ZnO量的增加而下降,要兼顾场发射电流密度及其稳定性,适量掺入ZnO可有效提高纳米金刚石的场发射性能.     

Synthesis of Cu vanadate nanorods for visible‐light photocatalytic degradation of gentian violet

Cu vanadate nanorods have been synthesized via the hydrothermal process using polymer polyvinyl pyrrolidone (PVP) as the surfactant. X‐ray diffraction (XRD) shows that the nanorods are composed of monoclinic Cu₅V₂O₁₀ phase. Scanning electron microscopy (SEM) observation shows that the diameter and length of the nanorods are 50–300 nm and 3 μm, respectively. PVP concentration, hydrothermal temperature and duration time play essential roles in the formation and sizes of the Cu vanadate nanorods. A PVP‐assisted nucleation and crystal‐growth process is proposed to explain the formation of the Cu vanadate nanorods. Gentian violet (GV) is used to evaluate the photocatalytic activities of the Cu vanadate nanorods under solar light. The GV concentration clearly decreases with increasing irradiation time, and content of the Cu vanadate nanorods. GV solution with the concentration of 10 mg L⁻¹ can be totally degraded under solar light irradiation for 4 h using 10 mg Cu vanadate nanorods. The Cu vanadate nanorods have good photocatalytic activities for the degradation of GV under solar light.     

Synthesis of Single‐Crystalline Spinel LiMn2O4 Nanorods for Lithium‐Ion Batteries with High Rate Capability and Long Cycle Life

The long‐standing challenge associated with capacity fading of spinel LiMn₂O₄ cathode material for lithium‐ion batteries is investigated. Single‐crystalline spinel LiMn₂O₄ nanorods were successfully synthesized by a template‐engaged method. Porous Mn₃O₄ nanorods were used as self‐sacrificial templates, into which LiOH was infiltrated by a vacuum‐assisted impregnation route. When used as cathode materials for lithium‐ion batteries, the spinel LiMn₂O₄ nanorods exhibited superior long cycle life owing to the one‐dimensional nanorod structure, single‐crystallinity, and Li‐rich effect. LiMn₂O₄ nanorods retained 95.6 % of the initial capacity after 1000 cycles at 3C rate. In particular, the nanorod morphology of the spinel LiMn₂O₄ was well‐preserved after a long‐term cycling, suggesting the ultrahigh structural stability of the single crystalline spinel LiMn₂O₄ nanorods. This result shows the promising applications of single‐crystalline spinel LiMn₂O₄ nanorods as cathode materials for lithium‐ion batteries with high rate capability and long cycle life.     

不同形貌纳米CoWO_4的水热法制备及气敏性能(英文)

以Co(NO3)2·6H2O、Na2WO4·2H2O为主要原料,去离子水为溶剂,利用水热法在不同条件下制备了一系列的纳米CoWO4,用XRD、TEM和比表面分析仪对产品的物相、形貌和比表面积进行了表征。较系统地探讨了水热条件(反应混合物pH值、反应时间、反应温度等)对产物物相和形貌的影响,并研究了不同形貌产品对甲醛、乙醇、氨气、苯和丙酮等的敏感性能。结果表明:水热条件对产品的物相和形貌有影响,在不同水热条件下,可成功制备CoWO4纳米颗粒、纳米立方体及纳米棒;以纳米颗粒、纳米立方体及纳米棒样品制成的气敏元件对被试气体有不同程度的响应,其中以纳米颗粒为基的元件在210℃对1 000μL·L-1NH3灵敏度为3.3。     

制备二氧化钛分枝纳米棒阵列结构以提高聚合物杂化太阳电池的性能

分别采用一步水热法和两步水热法在导电玻璃(FTO)上制备了二氧化钛(TiO₂)纳米棒(NR)阵列和TiO₂分枝纳米棒(B-NR)阵列。 利用低温化学浴沉积法(CBD)在TiO₂纳米棒阵列(NRA)和TiO₂分枝纳米棒阵列(B-NRA)基底上沉积Sb₂S₃纳米粒子(NPs)。 接着分别旋涂聚-3已基噻吩(P3HT)和2,2'7,7'-四-(二甲氧基二苯胺)螺芴(Spiro-OMeTAD)组装成TiO₂(NRA)/Sb₂S₃/P3HT/Spiro-OMeTAD和TiO₂(B-NRA)/Sb₂S₃/P3HT/ Spiro-OMeTAD为光活性层的杂化太阳电池。 结果表明,由TiO₂(NRA)/Sb₂S₃/P3HT/Spiro-OMeTAD复合膜结构组装的杂化太阳电池的光电转换效率(PCE)是2.92%,而由TiO₂(B-NRA)/Sb₂S₃/P3HT/Spiro-OMeTAD复合膜结构组装的杂化太阳电池的PCE提高到了4.67%。     

Synthesis of core-shell structured Au@Bi2S3 nanorod and its application as DNA immobilization matrix for electrochemical biosensor construction

The core-shell structured Au@Bi2S3 nanorods have been prepared through direct in-situ growth of Bi2S3 at the surface of pre-synthesized gold nanorods.The product was characterized by X-ray diffraction,transmission electron microscopy and energy-dispersive X-ray spectroscopy.Then the obtained Au@Bi2S3 nanorods were coated onto glassy carbon electrode to act as a scaffold for fabrication of electrochemical DNA biosensor on the basis of the coordination of-NH2 modified on 5’-end of probe DNA and Au@Bi2S3.Electrochemical characterization assays demonstrate that the Au@Bi2S3 nanorods behave as an excellent electronic transport channel to promote the electron transfer kinetics and increase the effective surface area by their nanosize effect.The hybridization experiments reveal that the Au@Bi2S3 matrix-based DNA biosensor is capable of recognizing complementary DNA over a wide concentration ranging from 10 fmol/L to 1 nmol/L.The limit of detection was estimated to be 2 fmol/L(S/N=3).The biosensor also presents remarkable selectivity to distinguish fully complementa ry sequences from basemismatched and non-complementary ones,showing great promising in practical application.