Fingerprint and multicomponent quantitative analysis for the quality evaluation of Sibiraea angustata leaves by HPLC-DAD and HPLC-ESI-MS/MS combined with chemometrics

Sibiraea angustata leaves, known as a traditional Tibetan medicine, have been specially used in the treatment of indigestion and obesity. In the study, a simple and sensitive high-performance liquid chromatography (HPLC) method with a diode array detector (DAD) was established to solve the problem of lacking quality standard of S. angustata leaves, including the fingerprint analysis and quantification of six characteristic components. The analytical method was validated for linearity, repeatability, stability, recovery, and specificity. Seventeen raw samples and 1 processed sample of S. angustata leaves were collected from different locations of China to establish the fingerprint. The chemometric methods, including similarity analysis (SA), principal component analysis (PCA), and hierarchical clustering analysis (HCA), were applied to distinguish the 18 batches of S. angustata samples. The results successfully sorted these samples into five clusters and kept in line with each other. According to the result of the fingerprint analysis, 21 peaks were extracted to be the common peaks and most of them were identified by mass spectrometry (MS) with electron-spray ionization (ESI) in the negative mode. Meanwhile, the loading plot of PCA further indicated that the peaks of neochlorogenic acid, chlorogenic acid, ferulic acid, rutin, hyperin, and isoquercitrin played a greater role in the discrimination among the 21 peaks. So the six components mentioned above were investigated as index constituents to evaluate the quality of S. angustata leaves from different locations. The study demonstrated that the developed new method was a beneficial approach for authentication and quality evaluation of S. angustata leaves.     

Cun、Agn和Aun(n≤9)团簇的静电极化率

采用B3LYP密度泛函的方法计算了Cun，Agn和Aun(n≤9)团簇的静电极化率和极化率的各向异性，并与Na原子团簇进行比较，结果表明，Cun和Agn团簇的极化率与团簇大小的关系与Na原子团簇类似，而Aun团簇的极化率有所不同；Au原子的极化率较小，而从Au2至Au7，Aun团簇极化率变化趋势与Cun和Agn团簇相似。重金属元素团簇的极化率小于Na原子团簇的极化率，具有更加紧致结构。     

电化学在ICF靶制备中的新应用

报道了近年来在电解加工技术制备理论密度金属薄膜和电沉积技术制备金属纳米丝阵列材料等领域取得的进展。采用硫酸+甲醇电解液体系获得了表面粗糙度小于30nm的钛膜。采用阳极氧化铝模板电沉积技术制备出长度约10μm、直径约300nm的金纳米丝阵列。主要讨论了电解液配方及电解加工参数的选择,金属纳米丝直径与长度的控制等问题。     

靶丸X射线数字图像的轮廓分析及功率谱评价

 针对多层靶丸X射线数字图像的成像原理和轮廓边缘进行了理论分析;推导了由靶丸边缘特征点确定靶丸圆心和半径的精确最小二乘拟合算法;对于不同类型(阶跃状或屋顶状)的靶丸图像边缘,采用均化二阶微分算法或径向吸收强度最小二乘洛伦兹型拟合寻峰算法获取亚像素精度的靶丸圆周轮廓边缘数据;应用快速傅里叶变换算法对靶丸圆周轮廓数据进行分析,获得了靶丸表面外轮廓或内轮廓模数-功率谱特征曲线。     

放电等离子烧结制备纳米Ni块体材料

 采用自悬浮定向流法制备纳米Ni粉体,利用放电等离子烧结技术制备出了直径10 mm、厚2 mm,致密度为96.8 %,显微硬度为4.17 GPa的纳米块体材料。用X射线衍射仪、扫描电子显微镜和显微硬度计分析了烧结块体样品的相组成、晶粒尺寸、微观形貌和显微硬度。研究表明：随烧结温度的升高,块体样品的致密度和晶粒尺寸增大,当烧结温度为650 ℃时,致密度最高,晶粒尺寸为44.8 nm;显微硬度随烧结温度的增高先增大后减小,当烧结温度为550 ℃时,显微硬度最大为4.33 GPa;较高烧结温度下,断口微观形貌的纳米级韧窝出现,显示了韧性断裂的特征。     

Dynamics of a new Lorenz-like chaotic system

The present work is devoted to giving new insights into a new Lorenz-like chaotic system. The local dynamical entities, such as the number of equilibria, the stability of the hyperbolic equilibria and the stability of the non-hyperbolic equilibrium obtained by using the center manifold theorem, the pitchfork bifurcation and the degenerate pitchfork bifurcation, Hopf bifurcations and the local manifold character, are all analyzed when the parameters are varied in the space of parameters. The existence of homoclinic and heteroclinic orbits of the system is also rigorously studied. More exactly, for $b\ge 2a>0$ and $c>0$, we prove that the system has no homoclinic orbit but has two and only two heteroclinic orbits.     

超长定向含铁多壁碳纳米管阵列的制备

采用无模板化学气相沉积法,以二茂铁为催化剂,二甲苯为碳源,利用单温炉加热装置制备了定向碳纳米管阵列。运用扫描电子显微镜、透射电子显微镜、拉曼光谱和X射线衍射仪等对定向碳纳米管阵列的形貌、成分和物相进行细致的分析和表征。结果表明:制得的碳纳米管阵列具有良好的定向性和多壁管状结构,并且石墨化程度高;碳纳米管中除碳元素外,管中包含有少量以纳米颗粒和纳米线形式存在的铁及其化合物,主要成分是铁和碳化铁。结合碳纳米管的制备和透射电子显微镜分析表征结果,认为超长碳纳米管阵列的生长模式为底部生长方式,即经历催化剂分解、催化、成核、长大、中毒、凝聚成粒和连接成线的循环过程,正是由于碳源和催化剂的连续供应促成了碳纳米管阵列的快速定向生长。     

Thermal analysis of beamline heat load components due to increased power delivery from EAST neutral beam injector

Journal of Thermal Analysis and Calorimetry - According to EAST’s experimental plan, the long-pulse and high-power operation of neutral beam injector is the requirement for EAST. In this...     

金衢盆地加积型红土地球化学特征

金衢盆地广泛分布着不同类型的第四纪红土。通过X射线荧光光谱法（XRF）对金衢盆地的85个样品进行了测试。结果表明：（1）主量元素组成以SiO2、Fe2O3、Al2O3为主,K、Na、Ca、Mg等易溶组分的含量很低,TiO2含量的平均值高于UCC值;（2）MnO含量在网纹红土和均质红土的交界处明显聚集,推测与不同沉积物交界处理化性质突变有关;（3）在剖面上,SiO2、Fe2O3、AkO3等化学成分和硅铝率沿剖面变化的趋势,以及基岩和上覆沉积层的元素组成、化学风化指标和Ti／Zr的区别,均表明所研究的金衢盆地红土剖面具有较好的相似性,与典型的岩石风化壳存在明显差别。     

中国富硒食品的生产现状及趋势

对硒的生物学作用和目前已经开发的富硒食品(富硒西瓜、富硒灵芝、富硒茶叶、富硒牛奶、富硒猪肉和富硒鸡蛋等)进行了概述。当前富硒食品的技术含量大多偏低,技术水平有待提高;价廉物美的富硒食品受市场欢迎,科学论证富硒食品的转化机制是今后科研的一个方向。