The determination of aluminium in seawater and freshwater by cathodic stripping voltammetry

Dissolved aluminium in seawater and freshwater is determined by cathodic stripping voltammetry (c.s.v.) preceded by adsorptive collection of complex ions with 1,2-dihydroxyanthraquinone-3-sulphonic acid (DASA) on the hanging mercury drop electrode. Complexation of aluminium by DASA is rapid and no waiting period or heating of the sample is required. Optimal conditions are a DASA concentration of 10^?5 M, a solution pH of 7.1–7.3 and an adsorption potential of ?0.9 V; the c.s.v. scan is done in the differential-pulse mode. The limit of detection is 1 nM aluminium for an adsorption time of 45 s. The total time needed, including 50min deaeration and a standard addition, is 10–15 min per sample. No serious interferences were found; u.v. irradiation is recommended for samples containing high levels of organic materials.     

The use of continuous extraction for the removal of interfering elements in the determination of calcium and magnesium

Solvent extraction with a continuous extractor has been used to separate Al, Be, Bi, Cd, Ce, Cr, Co, Cu, Ga, In, Fe, Pb, Hg, Mo, Ni, Tl, Th, Sn, Ti, W, U, V, Zn and Zr, from calcium and magnesium, before titration of the latter with ethanediaminotetraacetic acid. Most of these elements arc extracted at ca, pH 5.0 as their chelates with 8-hydroxyquinoline using chloroform. Be, Ce and Cr are not extracted under these conditions and are converted into their acetylacetonates, before extraction with chloroform. Manganese is not quantitatively removed by any of these processes and is precipitated as its hydrated dioxide by boiling the extracted solution with sodium chlorite. Phosphate, arsenate and selenate can be removed by precipitating them in acid solution with excess zirconium nitrate, and removing the latter with 8-hydroxyquinoline.     

Synthesis of cyclic hydrocarbons via intramolecular coupling of bis-pentadienyl iron tricarbonyl cations

A general synthesis for the preparation of medium sized cycloalkanes having 1,2-butadienyl substituents is described. The reaction sequence involved acylation of butadiene-iron tricarbonyl with a diacid chloride, reduction of the resultant diketone to a diol derivative and conversion with HBF₄ to an acyclic bis-pentadienyl Fe(C0)₃ dicationic complex. Upon treatment with zinc the dication undergoes intramolecular ring closure to afford the bis-Fe(C0)₃ complex of the 1,2-dibutadienyl cycloalkane. Five-, six- and ten-membered cyclolalkene derivatives have been prepared in this manner.     

Nickel cluster structure determined from the adsorption of molecular nitrogen: Ni49-Ni71

The geometrical structures of nickel clusters in the size range from 49 to 71 atoms are studied by the chemical probe method. Saturation coverages of molecular nitrogen are determined for each cluster and from this data specific structures are proposed (except for Ni₆₆ and Ni₆₇). The results indicate that icosahedral packing is the dominant structural configuration throughout this size range, in agreement with earlier results based on water and ammonia adsorption. In addition, it seems that for clusters larger than Ni₅₄ the excessive strain in the surface of the 55-atom regular icosahedron often leads to rear-rangements of the surface atoms to relieve that strain. Ni₅₅, in particular, is found to have two isomers, the regular icosahedron and a structure in which a single apex atom is displaced to the center of an opposite face. Ni₇₁ occurs as a 55-atom regular icosahedron with a 16-atom cap. The results suggest that the atoms in the cap adopt an ABA configuration relative to the underlying icosahedron rather than an icosahedral arrangement. For some clusters the saturation with nitrogen causes a small degree of surface reconstruction that leads to the adsorption of additional nitrogen molecules.Work supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, under Contract No. W-31-109-Eng-38     

Intra- vs intermolecular photoinduced electron transfer reactions of a macrocyclic donor-acceptor dyad

The synthesis, structural characterization, and photophysical behavior of a 14-membered tetraazamacrocycle with pendant 4-dimethylaminobenzyl (DMAB) and 9-anthracenylmethyl groups is reported (L3, 6-((9-anthracenylmethyl)amino)-trans-6,13-dimethyl-13-((4-dimethylaminobenzyl)amino)-1,4,8,11-tetraazacyclotetradecane). In its free base form, this compound displays rapid intramolecular photoinduced electron transfer (PET) quenching of the anthracene emission, with both the secondary amines and the DMAB group capable of acting as electron donors. When complexed with Zn(II), the characteristic fluorescence of the anthracene chromophore is restored as the former of these pathways is deactivated by coordination. Importantly, it is shown that the DMAB group, which remains uncoordinated and PET active, acts only very weakly to quench emission, by comparison to the behavior of a model Zn complex lacking the pendant DMAB group, [ZnL2]2+ (Chart 1). By contrast, Stern-Volmer analysis of intermolecular quenching of [ZnL2]2+ by N,N-dimethylaniline (DMA) has shown that this reaction is diffusion limited. Hence, the pivotal role of the bridge in influencing intramolecular PET is highlighted.     

EFFECT OF BASE SEQUENCE ON THE ULTRAVIOLET IRRADIATION PRODUCTS OF DOUBLE-STRANDED POLYNUCLEOTIDES CONTAINING BROMOURACIL AND ADENINE

Abstract —The effects of ultraviolet irradiation of double-stranded synthetic polynucleotides containing BrU and A have been investigated. Homopolymer pairs and alternating copolymers composed of either ribo- or deoxyribo-nucleotides were prepared and were irradiated with either 313 nm or ˜ 285 nm light. Strand separation and a modest amount of strand breakage followed irradiation of the homopolymer pairs. Changes in the ultraviolet absorption spectra of the polymers during irradiation reflected the sum of hyperchromic increases caused by progressive strand separation and loss of absorbance caused by photoproduct formation. Extensive debromination occurred. An RNase digest of irradiated poly(rA)–poly¹⁴C(rBrU), analysed by column chromatography, showed components similar to those found previously upon irradiation of single-stranded poly(rBrU). Little photoproduct was released by RNase digestion as mononucleotides. The major photoproduct was in the dinucleotide fraction, and may be 5,5'-diuracil. Base sequence had a profound effect on the sensitivity of the polynucleotides. Irradiation of alternating copolymers with doses of light comparable to those that produced major photochemical changes in the homopolymer pairs brought about little if any change in the copolymers of alternating base sequence.     

The spectrophotometric determination of chromium in sea water

The coprecipitation of chromium from sea water by several precipitates was examined. With hydrous iron(III) oxide a recovery of chromium of >99% was obtained within the pH range 7.0–9.0 at a chromium level of ca. 0.4 μg/l. Chromium was separated from iron by anion exchange and determined spectrophotometrically using diphenylcarbazide. The method showed a precision of ±0.02 μg Cr/1. Chromium occurs in sea water in the 3+ oxidation state.     

An MO study of regioselective amine addition to ortho-quinones relevant to melanogenesis

Energy profiles for alternative intramolecular cyclisations of 4-(aminoalkyl)-ortho-quinones have been calculated using the AM1 method and ab initio energies of the transition states are determined. In all the cases cyclisation at position 5 occurs via a significantly lower energy transition state than cyclisation at position 3. This is consistent with experimental observations. Optimal trajectories for attack have been determined from a study of the reactions of methylamine with 4-methyl-ortho-quinone. For cyclisation of aminoalkyl derivatives deviation from the optimal direction is less for reaction at position 5 but constraint on angle of attack only partially accounts for the regioselectivity. Intrinsic differences in the electronic energies of the alternative transition states are the main contributor to regioselectivity. The relative energies of transition states can be modified by variation of the substituent at position 4. The calculations suggest that seven-membered ring formation may occur via a boat transition state and steric hindrance in the seven-membered transition states may account for the experimentally observed influence of N-substituents on the mode of reaction.