Finite-size effects in simulations of nucleation

We investigate the importance of finite-size effects in simulations of nucleation processes. Most molecular dynamics simulations of first order phase transitions, such as vapor-liquid nucleation, are performed in the canonical NVT ensemble where, owing to the fixed total number of molecules N, the growth of the new phase causes the depletion of the metastable phase. This effect may lead to significant errors in the simulation and even to the impossibility of observing nucleation in a small finite system. We present a theory to estimate the system size beyond which these finite-size effects are expected to be negligible. This optimization saves valuable calculation time and can extend the range of supersaturations and rates attainable by simulations by several orders of magnitude. Our results are applicable to diverse situations, such as crystallization, capillary condensation, or the melting of nanoclusters.     

Native fluorescence flow-through optosensor for the fast determination of diphenhydramine in pharmaceuticals.

A single, rapid flow-through optosensor spectrofluorometric system is proposed for the determination of diphenhydramine in different pharmaceutical preparations. This sensor was developed in conjunction with a monochannel flow-injection analysis system with fluorometric solid-phase transduction. Diphenhydramine was directly injected into a carrier stream of ethanol/water, 50% (v:v), and transitorily retained on a sorption gel Sephadex G-15 placed in the detection area into the cell. The determination was carried out without any derivatization reaction by directly measuring the intrinsic fluorescence of the analyte and using the peak height as an analytical signal. The chemical and instrumental variables were optimized, and the influence of some foreign substances that can be found in typical pharmaceutical samples containing diphenhydramine was also investigated. Diphenhydramine could be determined in the concentration ranges of 0.5 - 8 microg ml(-1) and 0.1 - 1.2 microg ml(-1) with detection limits of 0.088 and 0.019 microg ml(-1) at sampling rates of 30 and 19 h(-1) for 200 and 800 microl of the sample volume, respectively.     

Role of the water of crystallization in the Mössbauer spectra of some low-spin ferric and high-spin ferrous compounds. Its implications in comparative studies

Mössbauer spectra of low-spin ferric and high-spin ferrous compounds may be sensitive to the local humidity during the measuring process or to other parameters associated with the hydration degree of the sample. This effect is related to the location of water molecules around the t_2g orbitals (d_xy, d_xz, d_yz). The results indicate that for comparative studies all Mössbauer measurements must be carried out in well standardized conditions.     

CMMSE: analysis and comparison of some numerical methods to solve a nonlinear fractional Gross–Pitaevskii system

Journal of Mathematical Chemistry - In this work, we introduce and theoretically analyze various computational techniques to approximate the solutions of solve a fractional extension of a double...     

Thermal-induced changes in molecular magnets based on prussian blue analogues

The thermal-induced changes in molecular magnets based on Prussian blue analogues, M(3)[Fe(CN)(6)](2).xH(2)O (M = Mn, Co, Ni, Cu, Zn, and Cd), were studied from infrared, X-ray diffraction, thermo-gravimetric, M?ssbauer, and magnetic data. Upon being heated, these materials loose the crystalline water that enhances the interaction between the metal centers, as has been detected from M?ssbauer spectroscopy data. At higher temperatures, a progressive decomposition process takes place, liberating CN(-) groups, which reduces the iron atom from Fe(III) to Fe(II) to form hexacyanoferrates(II). The exception corresponds to the cobalt compound that undergoes an inner charge transfer to form Co(III) hexacyanoferrate(II). In the case of zinc ferricyanide, the thermal decomposition is preceded by a structural transformation, from cubic to hexagonal. For M = Co, Ni, Cu, and Zn the intermediate reaction product corresponds to a solid solution of M(II) ferricyanide and ferrocyanide. For M = Mn and Cd the formation of a solid solution on heating was not detected. The crystal frameworks of the initial M(II) ferricyanide and of the formed M(II) ferrocyanide are quite different. In annealed Mn(II) ferricyanide samples, an increasing anti-ferromagnetic contribution on heating, which dominates on the initial ferrimagnetic order, was observed. Such a contribution was attributed to neighboring Mn(II) ions linked by aquo bridges. In the anhydrous annealed sample such interaction disappears. This effect was also studied in pure Mn(II) ferrocyanide. The occurrence of linkage isomerism and also the formation of Ni(III), Cu(III), and Zn(III) hexacyanoferrates(II) were discarded from the obtained experimental evidence.     

An integrated reaction-retention and spectrophotometric detection flow system for the determination of nickel

An integrated flow-through photometric sensor for the determination of nickel in real samples of various origins has been developed. The sensor is based on the reaction of Ni(II) with 1-(2-pyridylazo)-2-naphthol (PAN) immobilized on a cationic resin which was placed in a flow-cell using a spectrophotometer tuned at 566 nm as detector. The Ni(II) ion from the sample injected into the carrrier stream (pH = 5.0) of a monochannel continuous flow system reacts with the immobilized chromogenic reagent to form a red chelate which remains on the active solid support and generates the analytical signal. When this reached its maximum value the Ni(II)-PAN chelate was destroyed using 1 M H₂SO₄ as eluents, leaving the sorbed PAN untouched. The response of the sensor was linear in the three concentration ranges assayed: 0.3–4.0, 0.1–1.6 and 0.05–0.8 μg mL^–1 for sample volumes of 100, 400 and 800 μL, respectively, and the R.S.D.(%) (n = 10) were 1.80(100 μL), 3.04(400 μL) and 2.29(800 μL). The sensor showed an excellent selectivity which could also be increased with a simple on-line modification to avoid interference from copper. It was applied to a variety of real samples with very good results in all cases.     

Methodology of multicriteria optimization in chemical analysis Some applications in stripping voltammetry

Multicriteria optimization, widely used in engineering, does not much used in the optimization of analytical signals. The aim of this paper is to show the usefulness of the desirability function to optimize instrumental responses obtained in instrumental analysis. The simultaneous optimization of a signal and of its variability is a generic question of interest to any chemical analyst. It is clear that the improvement of the two responses forms the basis of the validation of any analytical method, and affects all the figures of merit: accuracy (trueness and precision), capability of detection, robustness, sensitivity, etc. Furthermore, in the specific case of electroanalysis, an improvement in the signal may implicitly mean an increase of the signal in the blank, such that the “net signal” may not improve. This experimental approach (surface response methodology plus desirability) to multicriteria optimization has been applied to three cases of growing complexity. Thus, in the determination of Cu(II) by differential pulse anodic stripping voltammetry the simultaneous maximization of the peak current and minimization of its standard deviation is looked for. Whereas, in the determinations of Ni(II) and indomethacin by differential pulse adsorptive stripping voltammetry, the simultaneous maximization of the peak current and minimization of the blank signal is desired. In all the cases, the experimental conditions where the optima are found for each individual response are just opposite, so it is required to look for a certain compromise, that is achieved using the desirability function.     

A Raman and infrared study of 1-furoyl-3-monosubstituted and 3,3-disubstituted thioureas

Raman and IR spectra of two series of 1-furoylthiourea derivatives (19 compounds) were recorded and compared in order to identify the vibrations, which involve contributions from motions within the thioureido (NCSN) core. This procedure allowed an unequivocal identification of the nu(CS) vibration in these spectra. In 3-monosubstituted furoylthioureas (Series 2) the carbonyl group and the proton on N(3) are engaged in a strong hydrogen bond interaction. This leads to an "S"-shaped conformation of the CO and CS groups where these donor sites reach a maximum separation. In this conformation, the nu(CO) vibration is not influenced by the substituent. In the absence of that hydrogen bridge, in 3,3-disubstituted thiourea derivatives (Series 1), the CO and CS groups adopt an "U"-shaped conformation. In this conformation, the nu(CO) vibration shows a pronounced substituent dependence. These thiourea derivatives have been tested as ionophores for heavy-metal ion selective electrodes and their behavior in that sense correlates with the observed Raman and IR absorptions. The best performance in that application corresponds to compounds of Series 2, which showed the highest frequency values of the nu(CS) vibration. This fact was related to an appropriated nucleophilic character of the sulphur atom. From these data, Raman and IR spectra of these thiourea derivatives could be used as a predictor on their expected behavior in analytical applications as ionophores.     

Structural and thermal study of calcium undecanoate

In the present work, an X-ray diffraction (XRD) and thermal study of calcium undecanoate is presented. The measured high-resolution XRD powder pattern of the synthesized salt at room temperature, using synchrotron radiation, showed that the salt is a mixture of monohydrated and anhydrous calcium undecanoate. Calcium undecanoate monohydrate proved to have a monoclinic cell with a symmetry described by the P2₁/a space group. The structure dehydrates at about 100°C. After dehydration, the salt undergoes a phase transformation which results in a thermotropic mesophase. Further heating of the salt leads to decomposition and melting. Ketones are the probable products of decomposition at 400°C.