分光光度法测定阿奇霉素的改进

通过对阿奇霉素显色反应过程中硫酸浓度,反应时间,反应温度的研究,优化了分光光度法测定阿奇霉素含量的方法。结果表明,阿奇霉素在11.26—45.03mg.L-1浓度范围内,显色溶液在482nm处吸光度与其浓度具有良好的线性关系,线性回归方程为A=0.0172C（mg.L-1）＋0.0504,平均回收率为99.1%（n=9）。该方法简单,比传统光度法更灵敏、准确,适合于阿奇霉素含量的快速测定。     

Synthesis of novel 15-membered macrolide derivatives

In order to develop new antibiotics effective against resistant bacteria,a series of novel 15-membered macrolide derivatives were designed and synthesized by the modification of hydroxyl groups at C-11,C-12 and C-4＂ positions.Their structures were confirmed by MS,IR,^1H NMR or ^13C NMR.     

Determination of azithromycin residue in pork using a molecularly imprinted monolithic microcolumn coupled to liquid chromatography with tandem mass spectrometry

Using spiramycin as a dummy template, a molecularly imprinted polymer monolithic micro‐column with high selection to azithromycin was prepared in a micropipette tip. The imprinting factor of the monolithic micro‐column prepared was approximately 2.67 and the morphological structure of the polymers was characterized by scanning electron microscopy. A simple, sensitive, and reproducible method based on the imprinted monolithic micro‐column coupled to liquid chromatography with tandem mass spectrometry was developed for determining the residues of azithromycin in pork. Pork samples were extracted with acetonitrile, cleaned up under the optimal monolithic micro‐column conditions, and analyzed using liquid chromatography with tandem mass spectrometry in the multiple reaction monitoring mode. The assay exhibited a linear dynamic range of 0.50–50 μg/L with the correlation coefficient (r²) above 0.99. In the three spiking levels of 0.50, 1.0, and 10 μg/kg, the average recoveries of azithromycin from pork samples were between 85.8 and 96.5% with a relative standard deviation below 10%. The limit of detection and limit of quantitation were 0.03 and 0.1 μg/kg, respectively.     

Development and Validation of a Micellar Liquid Chromatographic Method with UV Detection for Determination of Azithromycin in Tablets and Capsules

A rapid and simple micellar liquid chromatographic method that does not require use of specific chromatographic columns has been developed and validated for azithromycin determination. The method uses a Hypersil C₁₈ column at 60 °C, 1-butanol–pH 6.86 phosphate buffer solution–water, 15:25:60 (v/v), containing 0.10 M sodium dodecyl sulfate, as mobile phase, and UV-detection at 215 nm. Different characteristics of the method were validated satisfactorily. The specificity, accuracy, linearity, precision (repeatability), and robustness of the method were demonstrated. The method proved suitable for determination of the azithromycin content of capsules and uncoated tablets.Revised: 5 February and 11 March 2004     

漫反射FT-IR法测定阿奇霉素片剂中阿奇霉素的含量

采用红外温反射定量分析技术，测定了阿奇霉素片剂中阿奇霉素的含量。在红外光谱中，吸光度与阿奇霉素的浓度成良好的线性关系，平均回回收率为99.2%,RSD为1.7%。可用于阿奇霉素片剂中阿奇霉素的含量测定。     

Investigation of porous graphitic carbon at high-temperature liquid chromatography with evaporative light scattering detection for the analysis of the drug combination artesunate—Azithromycin for the treatment of severe malaria

Artesunate combined therapies represent the best option for the treatment of malaria and require the development of new methods of analysis. Retention, selectivity and detection with high-temperature liquid chromatography-porous graphitic carbon-evaporative light scattering detection was studied for artesunate and azithromycin separation. Organic solvent, concentration of organic modifiers, temperature and flow rate were all relevant parameters to optimize this separation. The behaviour of artesunate in the tested conditions appeared close to a neutral compound. In CH₃OH, only azithromycin retention was dramatically altered depending on the [triethylamine]/[formic acid] ratio and on the temperature, whereas in CH₃CN, azithromycin, artesunate, artemisinin and dihydroartemisinin retentions decreased with the temperature increase whatever the organic modifier ratio. The best efficiency was obtained with CH₃CN. 25% variation of the concentration values of the organic modifiers did not significantly influenced the retention. The sensitivity of ELSD increased with the flow rate decrease. Peak area and S/N ratio dramatically decreased with the flow rate increase by 10- and 5-fold for artesunate and azithromycin, respectively. Non-linear calibration curves were obtained for both artesunate and azithromycin.     

New automatized method with amperometric detection for the determination of azithromycin

A FIA-amperometric method for azithromycin determination was developed. A working glassy carbon electrode and a Ag/AgCl/NaCl (3 M) reference electrode were used. The determination is based on the electrochemical oxidation of the azithromycin at 0.9 V in Britton-Robinson buffer solution (pH 8.0). Due to the adsorption of the reaction products on the electrode surface, an effective cleaner cycle was implemented. By using the optimum chemical and FIA conditions, a concentration linear range of 1.0-10.0 mg L⁻¹ and a detection limit (LOD) of 0.76 mg L⁻¹ are obtained. The method was validated and satisfactorily applied to the determination of azithromycin in pharmaceutical formulations.     

阿奇霉素含量的荷移光谱法测定

用分光光度法分别研究了阿奇霉素与7,7,8,8-四氰基对二次甲基苯醌(TCNQ)和氯冉酸(CL)之间的荷移反应。实验表明：阿奇霉素与TCNQ间的反应在丙酮介质中进行,形成的络合物在743和842 nm有两个吸收峰,表观摩尔吸光系数分别是2.7×104 L·mol-1·cm-1和5.0×104 L·mol-1·cm-1;阿奇霉素与氯冉酸的反应在丙酮介质中进行,形成的络合物在530 nm处有吸收峰,表观摩尔吸光系数2.4×103 L·mol-1·cm-1。用摩尔比法和等摩尔连续变化法测得荷移络合物中阿奇霉素与配体的摩尔比均为1∶2。用以上两种方法测定了阿奇霉素片剂中阿奇霉素的含量,相对标准偏差为1.0%～1.4%(n=6),回收率为97%以上,与标准方法比较结果准确。     

Facile synthesis of the necklace-like graphene oxide-multi-walled carbon nanotube nanohybrid and its application in electrochemical sensing of Azithromycin

A novel electrochemical platform was designed for the determination of Azithromycin (Azi), a widely used macrolide antibiotic, by combining the hydrophilic properties of graphene oxide (GO) and the excellent electronic and antifouling properties of multi-walled carbon nanotubes (MWCNTs). Stable MWCNTs aqueous dispersion has been prepared using GO nano-sheets as surfactant and the obtained GO-MWCNTs nanohybrid was characterized by UV–vis spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, transmission electron microscopy and electrochemical impedance spectroscopy, which confirmed that GO nano-sheets were attached onto the wall of MWCNTs to form a necklace-like structure. Electrochemical results obviously reveal that the oxidation peak currents of Azi obtained at the GC electrode modified with GO-MWCNTs hybrid are much higher than those at the MWCNTs/GC, GO/GC and bare GC electrodes. Under optimized conditions, the anodic peak current was linear to the concentration of Azi in the range from 0.1 to 10 μM with the detection limit of 0.07 μM. To further validate its possible application, the proposed method was successfully used for the determination of Azi in pharmaceutical formulations with satisfactory results.     

Sonocrystallization of a novel ZIF/zeolite composite adsorbent with high chemical stability for removal of the pharmaceutical pollutant azithromycin from contaminated water

Water pollution management, reduction, and elimination are critical challenges of the current era that threaten millions of lives. By spreading the coronavirus in December 2019, the use of antibiotics, such as azithromycin increased. This drug was not metabolized, and entered the surface waters. ZIF-8/Zeolit composite was made by the sonochemical method. Furthermore, the effect of pH, the regeneration of adsorbents, kinetics, isotherms, and thermodynamics were attended. The adsorption capacity of zeolite, ZIF-8, and the composite ZIF-8/Zeolite were 22.37, 235.3, and 131 mg/g, respectively. The adsorbent reaches the equilibrium in 60 min, and at pH = 8. The adsorption process was spontaneous, endothermic associated with increased entropy. The results of the experiment were analyzed using Langmuir isotherms and pseudo-second order kinetic models with a R2 of 0.99, and successfully removing the composite by 85% in 10 cycles. It indicated that the maximum amount of drug could be removed with a small amount of composite.