Development and validation of capillary electrophoresis method for tobramycin with precapillary derivatization and UV detection

One of the major drawbacks in the analysis of aminoglycoside antibiotics is their lack of UV chromophore and/or fluorophore. Tobramycin, a representative member of this group, was examined in this study. To overcome the detection hurdle, a precapillary derivatization followed by capillary electrophoresis analysis with direct UV detection was investigated. A central composite design was applied to optimize the method and three parameters were selected in this study: buffer pH, temperature and % acetonitrile (ACN). Selectivity between tobramycin main component and its adjacent peaks as well as the peak efficiency and symmetry factors were established as responses. For each response, a model was obtained by a second-order mathematical expression. Successful results were obtained with a simple background electrolyte (BGE) containing 30 mM sodium tetraborate, pH 10.2, and ACN (75:25 v/v). Under these conditions, baseline separation of tobramycin from its adjacent kanamycin B and an unknown peak was achieved. A temperature of 20 degrees C and applied voltage of 28.0 kV were used. The method showed good validation data in terms of precision, limits of quantitation and detection, specificity and linearity and was found to be suitable for analysis of tobramycin bulk pharmaceutical samples.     

Optimization of solid-phase microextraction procedures for the determination of tricyclic antidepressants and anticonvulsants in plasma samples by liquid chromatography

Simple, sensitive, and reproducible off-line solid-phase microextraction and liquid chromatography (SPME/LC) methods are described for the determination of seven anticonvulsants and tricyclic antidepressants in human plasma. Factorial design and simplex methodology were applied in the optimization of the SPME procedure for tricyclic antidepressants analyses. Important factors in the SPME efficiency are discussed, such as the fiber coatings (both lab-made and commercial), extraction time, pH, ionic strength, influence of plasma proteins, and desorption conditions. The development of the lab-made fiber coatings, namely, octadecylsilane, aminosilane, and polyurethane, are further described and applied to anticonvulsants analyses. The investigated plasmatic range for the evaluated anticonvulsants, using CW-TPR fiber, were the following: phenylethylmalonamide (3.00–40.0 μg mL⁻¹), phenobarbital (5.00–40.0 μg mL⁻¹), primidone (3.00–40.0 μg mL⁻¹), carbamazepine and carbamazepine-epoxide (2.00–24.0 μg mL⁻¹), phenytoin (2.00–40.0 μg mL⁻¹), and lamotrigine (0.50–12.0 μg mL⁻¹). The antidepressants’ linear plasmatic concentration ranged from 75.0 to 500 ng mL⁻¹ for imipramine, amitriptyline, and desipramine, and from 50.0 to 500 ng mL⁻¹ for nortriptyline, being in all cases, the limit of quantification represented by the lowest value. The precision (interassays) for all investigated drugs in plasma sample spiked with different concentrations of each analyte and submitted to the described procedures were lower than 15%. The off-line SPME/LC methodologies developed allow anticonvulsants and antidepressants analyses from therapeutic to toxic levels for therapeutic drug monitoring.     

Immunoaffinity in-tube solid phase microextraction coupled with liquid chromatography-mass spectrometry for analysis of fluoxetine in serum samples

The inherent selectivity of the antibody was combined with in-tube solid-phase microextraction by immobilization of the antibody into the fused silica capillary. A sensitive, selective, and reproducible immunoaffinity in-tube solid-phase microextraction coupled with liquid chromatography-mass spectrometry (in-tube SPME/LC-MS) method was developed, and validated for fluoxetine analysis in human serum. Important factors in the optimization of in-tube SPME variables, as well as the evaluation of the immunoaffinity capillary capacity are discussed. The in-tube SPME/LC-MS method presented a limit of quantitation of 5.00 ng/mL, and precision intra-assays with RSDs lower than 5%. The response of the in-tube SPME/LC-MS method for fluoxetine was linear over a dynamic range from 5.00 to 50.00 ng/mL, with correlation coefficients better than 0.998. Based on analytical validation it was demonstrated that in-tube SPME/LC-MS method offers high sensitivity, selectivity, and enough reproducibility to permit the quantification of fluoxetine in human serum at therapeutic levels. Thus, the proposed SPME/LC method can be useful tool to determine fluoxetine serum concentrations in patients receiving therapeutic dosages.     

Influence of ethanol and ultrasound on drying,bioactive compounds,and antioxidant activity of strawberries (Fragaria × ananassa)

This study aimed to evaluate the use of ethanol (ET) and ultrasound (US) in convective drying of strawberry slices, as well as the effect on physicochemical, bioactive, and antioxidant parameters. For this, strawberry slices with a thickness of 0.005 m were pretreated with ET (in different volume fractions), US, and a combination of both. Drying kinetics were performed for control strawberry slices (without ET and US) and pretreated with 50% ethanol (ET50), 50% ethanol and ultrasonic (ET50US), 100% ethanol (ET100), and 100% ethanol and ultrasonic (ET100US) at a temperature of 60 °C. Empirical and diffusive models were fitted to the experimental data to describe the drying kinetics, and the fresh and dried slices were analyzed according to the parameters of water activity (aw), water content, total phenolic compounds (TPC), total anthocyanins (ATS), vitamin C and antioxidant activity (AA) (ABTS?+, DPPH?, and FRAP). The use of the ET100US combination provided an increase in the moisture transport process, higher drying rate, shorter process time (570 min), and reduction of a_w to a safe value (a_w <0.5), however, it sharply degraded the TPC, ATS, and AA. The ET50US pre-treatment even with a drying time of 690 min was the most efficient, since the values of TPC, ATS, and vitamin C suffered smaller reductions, where the AA varied in only 10.32%, 13.78% and 6.54% for the methods ABTS?+, DPPH?, and FRAP, respectively when compared to fresh strawberry. In this sense, it can be stated that the pre-treatment with 50% ethanol and ultrasound (ET50US) showed less reduction in the degradation of bioactive and antioxidant properties, and in the minimization of drying time for strawberry slices.     

Measurement and modeling of osmotic coefficients of binary mixtures (alcohol + 1,3-dimethylpyridinium methylsulfate) at T = 323.15 K

Measurement of osmotic coefficients of binary mixtures containing several primary and secondary alcohols (1-propanol, 2-propanol, 1-butanol, 2-butanol, and 1-pentanol) and the pyridinium-based ionic liquid 1,3-dimethylpyridinium methylsulfate were performed at T = 323.15 K using the vapor pressure osmometry technique, and from experimental data, vapor pressure, and activity coefficients were determined. The extended Pitzer model modified by Archer, and the NRTL model modified by Jaretun and Aly (MNRTL) were used to correlate the experimental osmotic coefficients, obtaining standard deviations lower than 0.017 and 0.054, respectively. From the parameters obtained with the extended Pitzer model modified by Archer, the mean molal activity coefficients and the excess Gibbs free energy for the studied binary mixtures were calculated. The effect of the cation is studied comparing the experimental results with those obtained for the ionic liquid 1,3-dimethylimidazolium methylsulfate.