CDI-promoted direct esterification of P(O)-OH compounds with phenols

A novel and efficient N,N′-carbonyl diimidazole-catalyzed protocol for the direct esterification of P(O)-OH compounds using phenols as efficient esterification reagents is illustrated. It is a simple way to synthesis a broad spectrum of functionalized O-aryl phosphinates, phosphonates, and phosphates from basic starting materials with moderate to excellent yields.     

Simultaneous determination of phenols in Radix Polygalae by high performance liquid chromatography: quality assurance of herbs from different regions and seasons

Radix Polygalae, roots of Polygala tenuifolia or of Polygala sibirica, is a Chinese herbal medicine commonly used to prevent dementia. Reliable chemical markers for quality assurance of this herb are missing. Here, a high performance liquid chromatography method coupled with diode array detection was developed to simultaneously determine nine different phenols in Radix Polygalae, including sibiricose A(5), sibiricose A(6), glomeratose A, tenuifoliside A, glomeratose D, 3',6-di-O-sinapoyl sucrose ester, mangiferin, polygalaxanthone III, and polygalaxanthone XI. By using two different detection wavelengths in the HPLC analysis, the developed method was able to determine the phenols with excellent resolution, precision, and recovery. This established method was therefore applied to determine the amounts of phenols in thirty-two samples from different cultivation regions and harvest seasons in China, and significant variations were revealed. The amounts of phenols in the roots of P. tenuifolia collected in Shanxi and Shannxi Provinces were markedly higher than in roots collected from other Provinces. Moreover, the samples harvested in the spring contained higher contents of phenols than those collected in other seasons.     

Accelerated solvent extraction combined with dispersive liquid–liquid microextraction before gas chromatography with mass spectrometry for the sensitive determination of phenols in soil samples

A method combining accelerated solvent extraction with dispersive liquid–liquid microextraction was developed for the first time as a sample pretreatment for the rapid analysis of phenols (including phenol, m‐cresol, 2,4‐dichlorophenol, and 2,4,6‐trichlorophenol) in soil samples. In the accelerated solvent extraction procedure, water was used as an extraction solvent, and phenols were extracted from soil samples into water. The dispersive liquid–liquid microextraction technique was then performed on the obtained aqueous solution. Important accelerated solvent extraction and dispersive liquid–liquid microextraction parameters were investigated and optimized. Under optimized conditions, the new method provided wide linearity (6.1–3080 ng/g), low limits of detection (0.06–1.83 ng/g), and excellent reproducibility (<10%) for phenols. Four real soil samples were analyzed by the proposed method to assess its applicability. Experimental results showed that the soil samples were free of our target compounds, and average recoveries were in the range of 87.9–110%. These findings indicate that accelerated solvent extraction with dispersive liquid–liquid microextraction as a sample pretreatment procedure coupled with gas chromatography and mass spectrometry is an excellent method for the rapid analysis of trace levels of phenols in environmental soil samples.     

Polypyrrole/graphene composite-coated fiber for the solid-phase microextraction of phenols

A polypyrrole (Ppy)/graphene (G) composite was developed and applied as a novel coating for use in solid-phase microextraction (SPME) coupled with gas chromatography (GC). The Ppy/G-coated fiber was prepared by electrochemically polymerizing pyrrole and G on a stainless-steel wire. The extraction efficiency of Ppy/G-coated fiber for five phenols was the highest compared with the fibers coated with either Ppy or Ppy/graphene oxide (GO) using the same method preparation. Significantly, compared with various commercial fibers, the extraction efficiency of Ppy/G-coated fiber is better than or comparable to 85 μm CAR/PDMS fiber (best extraction efficiency of phenol, o-cresol, and m-cresol in commercial fibers) and 85 μm polyacrylate (PA) fiber (best extraction efficiency of 2,4-dichlorophenol and p-bromophenol in commercial fibers). The effects of extraction and desorption parameters such as extraction time, stirring rate, and desorption temperature and time on the extraction/desorption efficiency were investigated and optimized. The calibration curves were linear from 10 to 1000 μg/L for o-cresol, m-cresol, p-bromophenol, and 2,4-dichlorophenol, and from 50 to 1000 μg/L for phenol. The detection limits were within the range 0.34-3.4 μg/L. The single fiber and fiber-to-fiber reproducibilities were <8.3 (n=7) and 13.3% (n=4), respectively. The recovery of the phenols spiked in natural water samples at 200 μg/L ranged from 74.1 to 103.9% and the relative standard deviations were <3.7%.     

Simultaneous analysis of chlorophenols, alkylphenols, nitrophenols and cresols in wastewater effluents, using solid phase extraction and further determination by gas chromatography-tandem mass spectrometry

An analytical methodology has been developed for the simultaneous extraction of 13 phenolic compounds, including chlorophenols (CPs), nitrophenols (NTPs), cresols and alkylphenols (APs) in different types of wastewater (WW) effluents. A solid-phase extraction (SPE) method has been optimized prior to the determination by gas chromatography coupled to triple quadrupole tandem mass spectrometry (GC-QqQ-MS/MS). Due to the complexity of the matrix, a comparison study of matrix-matched-calibration (MMC) and standard addition calibration (SAC) was carried out for quantification purposes. The optimized procedure was validated using the SAC approach since it provided the most adequate quantification results (in terms of recovery and precision values). Recoveries were in the range 60-135% (0.5 μg L⁻¹), 70-115% (1 μg L⁻¹), and 78-120% (5 μg L⁻¹), with precision values (expressed as relative standard deviation, RSD) ≤30% (except for 2-nitrophenol) involving intra-day and inter-day precision studies. Limits of detection (LODs) and quantification (LOQs) were also evaluated, and LOQs ranged from 0.03 μg L⁻¹ to 2.5 μg L⁻¹. The proposed method was applied to the analysis of 8 real WW effluent samples, finding some phenolic compounds (e.g. 2-chlorophenol, 2,4,6-trichlorophenol and 4-tert-octylphenol) at concentrations higher than the established LOQs.     

Fingerprint chemotaxonomic GC–TOFMS profile of wood and bark of mangrove tree Sonneratia caseolaris (L.) Engl.

The bark and wood of Sonneratia caseolaris (L.) Engl. have been analyzed for chemical profile by GC–TOFMS. Overall thirty-two compounds from bark and twenty-eight compounds from wood have been detected. Sixteen constituents have been found to be common in both the extracts. GC–TOFMS chemical profile may be a significant finger print chemotaxonomic marker as an identity of this plant.     

A poly (4‐vinylpridine‐co‐ethylene glycol dimethacrylate) monolithic concentrator for in‐line concentration‐capillary electrophoresis analysis of phenols in water samples

A poly(4‐vinylpridine‐co‐ethylene glycol dimethacrylate) monolith was synthesized in a capillary and constructed as a concentrator for the in‐line polymeric monolith microextraction coupling with capillary electrophoresis. The integrated system was then used for the simultaneous determination of five trace phenols (2‐nitrophenol, 3‐nitrophenol, 4‐nitrophenol, 2‐chlorophenol, and 2,4‐dichlorophenol) in water samples. The experimental parameters for in‐line solid‐phase extraction, such as composition and volume of the elution plug, pH of sample solution, and the time for sample loading were optimized. The sensitivity for the mixture of phenols (2‐nitrophenol, 3‐nitrophenol, 4‐nitrophenol, 2‐chlorophenol, and 2,4‐dichlorophenol) enhanced to 615–2222 folds at the optimum condition was compared to the sensitivity for a normal hydrodynamic injection in capillary electrophoresis. Linearity ranged from concentration of 10–500 ng mL^?1(R² > 0.999) for all five phenols with the detection limits of 1.3–3.3 ng mL^?1. In tap, snow and Yangtze River water spiked with 20 ng mL^?1 and 200 ng mL^?1, respectively, the recoveries of 84–105% were obtained. It has been demonstrated that this work has great potential for the analysis of phenols in genuine water samples.     

Comparison of Immobilisation Procedures for Development of an Electrochemical PPO-Based Biosensor for on Line Monitoring of a Depuration Process

SUMMARY

The development of amperometric biosensors based on polyphenol oxidase (PPO) as a novel tool for the determination of phenolic compounds is described.

Biosensors have been obtained using different PPO-rich matrices: tissue slices from mushroom and potato, acetonic powder from mushroom; lyophilised enzyme from mushroom (tyrosinase-SIGMA). A large variety of immobilisation procedures have been used with pure enzyme and acetonic powder. Behaviour of all biosensors obtained has been investigated in terms of sensitivity. linearity range, response time and half life time. Preliminary experiments have been carried out, using a Flow Injection Analysis, with standard solutions of catechol and phenol in the range 1-10 mM, then biosensors have been also tested on a real sample (green water from crushers) with a direct method and a standard addition, one obtaining good reproducibility.     

A novel multiwalled carbon nanotubes bonded fused-silica fiber for solid phase microextraction-gas chromatographic analysis of phenols in water samples

The present work reports on the synthesis of chemically bonded multiwalled carbon nanotubes (MWCNTs)/fused-silica fibers and their use in solid phase microextraction of seven phenols from water samples coupled with gas chromatography (GC). The synthetic strategy was verified by infrared (IR) spectroscopy and field emission scanning electron microscopy. Adsorption factors (pH, ionic strength, stirring rate, adsorption time and temperature) and desorption factors (time and temperature) of the fibers were systematically investigated. Detection limits to seven phenols were less than 0.05 μg L⁻¹, and their calibration curves were all linear (R² ≥ 0.9984) in the range from 0.05 to 5000 μg L⁻¹. This method was then utilized to analyze two real water samples from Yellow River and sanitary wastewater, resulting in satisfactory results. Compared with normal solid phase materials, this MWCNTs-bonded fused-silica fibers showed a number of advantages: wide linear range and low detection limit for extracting phenols couple with GC, and good stability in acid, alkali, organic solvents and at high temperature.     

液晶/水界面上的氢键作用诱导液晶取向转变

本文提出液晶/水界面上氢键作用可以诱导热致型液晶(戊基联苯氰,简称: 5CB)发生取向转变.当液晶5CB膜接触酚类(如对硝基苯酚)水溶液的时候,由于酚类物质的酚羟基与液晶5CB分子中的氰基在液晶水界面上形成了氢键,在氢键的作用下使得液晶5CB由平行取向转变成了垂直取向.此外,还利用了液晶传感器可视化了酚类物质与牛血清蛋白(BSA)之间的相互作用.本文的研究结果可为研究液晶/水界面上的界面现象提供新的思路,并且有望开发出基于氢键作用的液晶生物化学传感技术.