Equilibrium and NMR Studies of Noncovalent Interactions in Binary Systems: Uridine,Adenosine, Cytidine and Thymidine,and Adenosine (or Cytidine) 5′-Monophosphate in Aqueous Solution

The molecular complex formation reactions of uridine (Urd) with adenosine (Ado), cytidine (Cyd), thymidine (Thd), adenosine 5-monophosphate (AMP) and cytidine 5-monophosphate (CMP) have been studied at 20°C. It was found that the main positive noncovalent centers of ion–dipole and dipole–dipole type interactions are the protonated N(3) atoms of Urd, whereas the negative centers are the endocyclic atoms of the bases characterized by high electron density from the second molecule involved in the reaction. Moreover, NMR results indicate the occurrence of stacking in the complex (Urd)H(Cyd), whereas in the complex, (Urd)H₂(Thd), it is the only type of interaction. Deprotonation of the latter species brings about a change in the character of the reaction and ion–dipole interactions have been detected in the adduct, (Urd)H(Thd). Interestingly, no involvement of the phosphate groups in the formation of AMP and CMP adducts has been evidenced and the main centers of the reactions were found to be the N(7)and N(1) atoms of AMP, or the N(3) atoms of CMP and Urd. Moreover, in the Urd/CMP system the NMR results suggest stacking-type interactions.     

Voltammetric sizing of a sphere.

The size of a glass sphere positioned in the center of a microdisk electrode is determined by using a simple electrochemical procedure and is confirmed, additionally, by a microscopical measurement of the sphere at the time of the electrochemical measurement. The cyclic voltammetric response of the naked electrode and of the electrode with the sphere positioned in its center is recorded over a wide range of scan rates (0.002-1.5 V s(-1)). The size of the sphere is then determined by comparison of the experimental voltammogram with simulations for each individual scan rate.     

Selenomethionine contents of NIST wheat reference materials

Values of the total selenium and selenomethionine (Semet) content of four wheat-based reference materials have been obtained by gas chromatography-stable isotope dilution mass spectrometry methods. The total Se method is an established one, and the results obtained with it are consistent with previously-assigned values. The Semet method (previously reported by our laboratory) is based on reaction with CNBr. Our data indicate that the four wheat samples (wheat gluten, durum wheat, hard red spring wheat, and soft winter wheat), though having a 30-fold range in total Se content, all have about 45% of their total Se values in the form of selenomethionine. Investigation of the CNBr-based method suggests that additional experiments are needed to verify that all selenomethionine in the wheat samples is accounted for, but also indicates that the values obtained are within 15% of the true values. As the form in which Se occurs in foods and dietary supplements is important from a nutritional perspective, adding information about Se speciation to total Se values in appropriate reference materials makes these materials more valuable in relevant analytical work.     

Solvothermal Synthesis, Crystal Structure, and Properties of the First Zinc Containing Thioantimonate(III) [Zn( tren)] 2Sb 4S 8·0.75 H 2O

Yellow crystals of the title compound were obtained under solvothermal conditions reacting elemental Zn, Sb, and S in a solution of tris(2-aminoethyl)amine (=tren) and water. The compound crystallises in the monoclinic space group P2₁/c with a=13.0247(7), b=22.308(2), c=12.1776(6) Å, and =105.352(6)°. In the structure of [Zn(tren)]₂Sb₄S₈·0.75 H₂O two [Zn(tren)]²⁺ cations are bound to the [Sb₄S₈]^4– anion via S atoms. The Zn²⁺ ions are in a trigonal bipyramidal environment of four N atoms of the tetradentate tren ligand and one S atom of the [Sb₄S₈]^4– anion. The anion is formed by SbS₃ and SbS₄ units which share common corners and edges. The interconnection mode yields three different non-planar Sb₂S₂ heterorings. The shortest intermolecular Sb–S distance amounts to about 3.7Å, and taking this long separation into account undulated chains running along [001] are formed with the water molecules residing in the pocket-like cavities. Upon heating the compound decomposes in one step starting at about 240°C. The final decomposition product was identified as ZnS and Sb₂S₃ by X-ray powder diffractometry. Additionally, spectroscopic data as well as synthetic procedures for [Zn(tren)]₂Sb₄S₈·0.75 H₂O are reported.     

Effect of operating parameters on selective separation of heavy metals from binary mixtures via polymer enhanced ultrafiltration

Performance of continuous polymer enhanced ultrafiltration (PEUF) method was investigated for removal of mercury and cadmium from binary mixtures. This method includes the addition of polyethyleneimine (PEI) as a water soluble polymer to bind the metals, which was followed by ultrafiltration operation performed on both laboratory and pilot scale systems. The influence of various operating parameters such as temperature, metal/polymer ratio, presence of calcium ions and pH on retention of metals and permeate flux was investigated. To investigate the possibility of selective separation of mercury and cadmium, experiments were conducted for binary solutions at different pH and loading ratios. It was seen that the retention of mercury decreased and permeate flux increased when the temperature increased. The increased pH and decreased metal/polymer ratio, loading (L), resulted in higher retention of both metals. Shapes of retention vs. pH or L curves were very similar for both metals. Retentions stay almost constant at a value very close to unity until a critical L or pH value was reached, then, R decreases almost linearly with L or pH. However, retention of cadmium was affected more than that of mercury as the pH decreased and L increased. This leads to the selective separation of mercury and cadmium. At low pH values (about 5) and at high L values (about 0.3), mercury was removed by ultrafiltration operation while almost all cadmium passed through the membrane. At pH 5.5 and cadmium/polymer ratio about 0.35 and mercury/polymer ratio about 0.39, the highest separation factor was obtained as 49.     

Biocomposites of covalently linked glucose oxidase on carbon nanotubes for glucose biosensor

The formation of covalently linked composites of multi–walled carbon nanotubes (MWCNT) and glucose oxidase (GOD) with high-function density for use as a biosensing interface is described. The reaction intermediates and the final product were characterized by using FT–IR spectroscopy, and the MWCNT-coated GOD nanocomposites were examined by atomic force microscopy (AFM) and transmission electron microscopy (TEM). Interestingly, it was found that the GOD–MWCNT composites are highly water soluble. Electrochemical characterization of the GOD–MWCNT composites that were modified on a glassy carbon electrode shows that the covalently linked GOD retains its bioactivity and can specifically catalyze the oxidation of glucose. The oxidation current shows a linear dependence on the glucose concentration in the solution in the range of 0.5–40 mM with a detection limit of 30 μM and a detection sensitivity of 11.3 μA/mMcm². The present method may provide a way to synthesize MWCNT related composites with other biomolecules and for the construction of enzymatic reaction-based biofuel cells and biosensors. Supported by grants from the National Natural Science Foundation of China (NSFC, No. 20125515; 90206037; 20375016) and the Natural Science Foundation of Jiangsu Province (Grant No. BK 2004210)     

Determination of the thiol redox state of organisms: new oxidative stress indicators

This study describes a new methodology by which the concentrations of non-protein (NP) thiols glutathione (GSH), cysteine (CSH), N-acetylcysteine (AcCSH), and protein (P) thiols (PSH), as well as the contribution of these components to symmetric and mixed disulfides (NPSSR, NPSSC, NPSSCAc, PSSR, PSSC, PSSCAc, PSSP) can reliably be measured. The methodology consists of a strict sequence of methods which are applied to every sample. Free thiols at any given state of the procedure are measured by Ellmans assay, the CSH fraction is measured by its unique response in the ninhydrin assay, AcCSH is selectively measured with ninhydrin after enzymatic deacylation, proteins are separated from non-protein thiols/disulfides by precipitation with trichloroacetic or perchloric acid, disulfides are reduced into free thiols with borohydride, mixed disulfides between a protein and a non-protein component are measured by extracting the non-protein thiol from the protein pellet after borohydride treatment, and protein thiols/disulfides are measured after resolubilization of the protein pellet.When this method was applied to animal and fungal tissue, new molecular indicators of the thiol redox state of living cells were identified. The findings of the present study clearly show that the new parameters are very sensitive indicators of redox state, while at the same time the traditional parameters GSH and GSSG often remain constant even upon dramatic changes in the overall redox state of biological tissue. Therefore, unbiased assessment of the redox state also requires explicit measurement of its most sensitive thiol indicators.Electronic Supplementary Material Supplementary material is available in the online version of this article at . A link in the frame on the left on that page takes you directly to the supplementary material.     

Synthesis of macrocyclic tetraamides derived from α-amino acids and their investigations using ESI-MS technique

Chiral α,ω-diesters react under high-pressure conditions (10 kbar) with α,ω-diamines to give chiral cyclic tetraamides of C₂-symmetry. The complexation properties of tetraamides towards alkali metal cations (Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺) were estimated on the basis of ESI-MS spectra.