用于双色全息存储(Fe,Cu)∶LiNbO3晶体的参量优化计算

在确定Cu在LiNbO3晶体中对应于365 nm和633 nm的激发系数、复合系数、光伏系数的基础上,采用龙格库塔(Runge-Kutta)数值方法理论研究了双掺杂(Fe,Cu)∶LiNbO3晶体的深浅能级的掺杂组分比、氧化还原状态对双色全息存储的记录灵敏度和动态范围的影响,并探讨了同时取得尽可能大的灵敏度和动态范围的晶体条件。结果表明,为了同时得到较大的记录灵敏度和动态范围,在实际应用中选用浅能级掺杂浓度为5.0×1025m-3,深能级掺杂浓度为3×1024~3×1025m-3之间的弱氧化晶体是合适的。     

基于波前像差的视网膜空间像调制度测定

提出了一种计算复色光下人眼视网膜空间像调制度的方法.利用Hartmann-Shack波前传感器测量的波前像差数据，求得眼睛光学系统的调制传递函数；利用CSV-1000测试仪和VAF-1000视锐度测试仪分别测量同一只眼睛的全眼对比敏感度函数以及视锐度，由调制传递函数、对比敏感度函数以及视锐度之间的关联获得复色光下人眼视网膜空间像调制度曲线.结果表明：视网膜空间像调制度曲线与眼光学系统的调制传递函数无关，并且正常人眼（无视网膜疾病）的视网膜空间像调制度值相近.因此多眼的空间像调制度曲线的统计平均值可以作为标准，用来评判人眼视网膜及视神经疾病.     

Bimetallic Silver-Gold Film Waveguide Surface Plasmon Resonance Sensor

It is desirable that a surface plasmon resonance (SPR) sensor is highly sensitive to binding interactions within the sensing region, generate evanescent fields with long penetration depths, and utilize a metal film that is very stable even in extreme environmental conditions. In this study, we present the first example of a wavelength-modulated waveguide SPR sensor with a bimetallic silver-gold film for surface plasmon excitation. The underlying silver yields better evanescent field enhancement of the sensing surface, while the overlying gold ensures that the stability of the metallic film is not compromised. It is shown experimentally that in terms of dλ/dn, the bimetallic film waveguide SPR configuration has a sensitivity of 1232 nm/RIU, greater than two times improvement from the 594 nm/RIU achievable with single gold film waveguide SPR sensor. The higher sensitivity, compact nature, and better evanescent field enhancement of this configuration provides the potential to biosensing applications.     

楔条形阳极探测器位置灵敏的理论计算

通过对楔条形阳极探测器位置灵敏坐标计算公式的推导,证明了楔形和条纹分布面积所对应的级数是等差级数.分析了楔形底宽和条纹宽度等差系数这两个设计参量对探测灵敏度的影响.研究了电极电容的电容性耦合效应对位置灵敏的影响,通过对楔条形阳极探测器坐标计算公式的修正,可在不影响分辨率的前提下有效地消除电容性耦合效应所产生的扭曲变形.     

透平叶栅三维粘性气动反问题的控制理论方法

将基于控制理论的形状优化设计方法应用于粘性可压流动条件下的透平叶栅三维气动反设计,详细推导了三维N-S方程伴随系统的偏微分方程组及其各类边界条件.讨论了伴随系统的解的适定性条件,并由此给出应用N-S方程进行气动优化的目标函数的选取限制.研究了伴随方程的数值求解技术,给出敏感性导数的最终计算式,结合拟牛顿算法发展了三维透平叶栅粘性反问题的气动设计方法.     

Nanoporous silicon doped by Cu for gas-sensing applications

The effect of hydrogen sulphide on the current–voltage characteristics of metal–insulator–semiconductor (MIS) structures based on nanoporous silicon (Si_nanopor) under copper doping has been investigated. Scanning electron (SEM), atomic force (AFM) and optic microscopes and/or secondary ion mass spectroscopy (SIMS) were used to obtain detailed characterisation of copper cluster distribution present at the surface and pores, respectively. SIMS spectra reveal that finite gradient in copper distribution along the pores and oxidation of nanoporous silicon simultaneously can be obtained successfully under electroless deposition process. It was also shown that the doping of nanoporous silicon by Cu leads to enhanced hydrogen sulphide sensitivity of MIS structures even without catalytic active top electrodes (for example, Pd) at room temperature. Furthermore, for different types of familiar MIS structures based on nanoporous silicon, e.g., MIS structures doped or undoped by copper and by using Pd metal electrodes, the hydrogen sulphide detection at room temperature mainly depends on the modification in the height of barrier of hetero- (Al–Cu–Si_nanopor–c-Si) or Schottky-like (Pd–Cu–Si_nanopor–c-Si) structures resulting the chemical interaction of molecular H₂S gas with copper clusters at the surface and in the pores. It is demonstrated that MIS structures based on the nanoporous silicon with copper doping are more sensitive to H₂S action at room temperature. In addition, the physical mechanism explaining the observed phenomena is also discussed.     

CVD金刚石薄膜探测器性能研究

通过实验测量和理论分析, 从载流子动力学角度研究了用于脉冲辐射探测的CVD金刚石薄膜探测器的适用结构、电荷收集效率和时间响应性能. 结果表明, CVD金刚石薄膜可以制成均匀型结构的探测器; 薄膜中的缺陷会降低探测器的电荷收集效率, 探测器的电荷收集效率随场强增大而增大直至饱和. 已研制的CVD金刚石探测器电荷收集时间可达719ps, 在2.5V/μm场强下达到饱和, 电荷收集效率 达60.5%; 晶格散射是影响探测器时间响应的主要因素, 选用大晶粒甚至单晶金刚石薄膜可以提高探测器时间响应.     

Synthesis,characterization, and properties of tunable thermosensitive amphiphilic dendrimer‐star copolymers with Y‐shaped arms

Novel and well‐defined amphiphilic dendrimer‐star copolymer poly(ε‐caprolactone)‐block‐(poly(2‐(2‐methoxyethoxy)ethylmethacrylate‐co‐oligo(ethylene glycol) methacrylate))₂ with Y‐shaped arms were synthesized by the combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The investigation of thermal properties and the analysis of crystalline morphology indicate that the high‐branched structure of dendrimer‐star copolymers with Y‐shaped arms and the presence of amorphous P(MEO₂MA‐co‐OEGMA) segments together led to the complete destruction of crystallinity of the PCL segments in the dendrimer‐star copolymer. In addition, the hydrophilicity–hydrophobicity transition of the dendrimer‐star copolymer film can be achieved by altering the external temperatures. The amphiphilic copolymers can self‐assemble into spherical nanomicelles in water. Because the lower critical solution temperature of the copolymers can be adjusted by varying the ratio of MEO₂MA and OEGMA, the tunable thermosensitive properties can be observed by transmittance, dynamic laser light scattering, and transmission electron microscopy (TEM). The release rate of model drug chlorambucil from the micelles can be effectively controlled by changing the external temperatures, which indicates that these unique high‐branched amphiphilic copolymers have the potential applications in biomedical field. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Dual thermo‐ and pH‐sensitive network‐grafted hydrogels formed by macrocrosslinker as drug delivery system

Dual thermo‐ and pH‐sensitive network‐grafted hydrogels made of poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) network and poly(N‐isopropylacrylamide) (PNIPAM) grafting chains were successfully synthesized by the combination of atom transfer radical polymerization (ATRP), reversible addition‐fragmentation chain transfer (RAFT) polymerization, and click chemistry. PNIPAM having two azide groups at one chain end [PNIPAM‐(N₃)₂] was prepared with an azide‐capped ATRP initiator of N,N‐di(β‐azidoethyl) 2‐chloropropionylamide. Alkyne‐pending poly(N,N‐dimethylaminoethyl methacrylate‐co‐propargyl acrylate) [P(DMAEMA‐co‐ProA)] was obtained through RAFT copolymerization using dibenzyltrithiocarbonate as chain transfer agent. The subsequent click reaction led to the formation of the network‐grafted hydrogels. The influences of the chemical composition of P(DMAEMA‐co‐ProA) on the properties of the hydrogels were investigated in terms of morphology and swelling/deswelling kinetics. The dual stimulus‐sensitive hydrogels exhibited fast response, high swelling ratio, and reproducible swelling/deswelling cycles under different temperatures and pH values. The uptake and release of ceftriaxone sodium by these hydrogels showed both thermal and pH dependence, suggesting the feasibility of these hydrogels as thermo‐ and pH‐dependent drug release devices. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A comparison of algainas and InGaAsP-based 1.3 μm semiconductor lasers using high pressure

Abstract

We have compared the effect of hydrostatic pressure on the threshold current, I_th, and lasing energy, E_lase, of 1.3 pm quantum-well devices based upon AlGaInAs and InGaAsP. Whilst we observe a very similar dependence of E_lase on pressure for the two materials, we measure strikingly different variations of I_th. By applying pressure to 1.3 μm InGaAsP lasers, I_th typically decreases by ～ 10% over 1 GPa consistent with the reduction of Auger recombination, which forms ～ 50% of I_th at room temperature. However, for the 1.3 μm AlGaInAs-based lasers, we observe an increase in I_th by ～ 8% over the same pressure range. From these results we conclude that non-radiative recombination accounts for only ～ 20% of I_th in AlGaInAs-based devices. This is in good agreement with previous temperature dependence measurements and shows why AlGaInAs-based devices exhibit a reduced temperature sensitivity of I_th which is very important for telecommunications applications.