Coordination Chemistry and Spectroscopic Properties of Some Diorganotin(IV) Complexes with S-Donor Schiff Base Ligands

Abstract

Schiff bases S-benzyl- and S-methyl-β-N-(2-hydroxyphenyl)methylene dithiocarbazate (H₂L¹ and H₂L², respectively) and S-benzyl- and S-methyl-β-N-(2-chlorophenyl)methylenedithiocarbazate (HL³ and HL⁴, respectively) were prepared. Then organotin(IV) complexes [SnPh₂(L¹)] (1), [SnMe₂(L¹)] (2), [SnPh₂(L²)] (3), [SnMe₂(L²)] (4), [SnPh₂Cl(L³)] (5), and [SnPh₂Cl(L⁴)] (6) were obtained from the reaction of Schiff bases with SnR₂Cl₂ (R = Ph and Me). The synthesized complexes have been investigated by elemental analysis and IR, ¹H NMR, and ¹¹⁹Sn NMR spectroscopy. Spectroscopic studies show that, in complexes 1–4, the Schiff base acts as a tridentate dianionic ligand and coordinates through the thiol group, imine nitrogen, and phenolic oxygen. The coordination number of tin is five. In complexes 5 and 6, the ligand is monoanionic and unidentate, and coordinated only via the thiol group, and the azomethine nitrogen is not involved in coordination to tin. Therefore the coordination number of tin is four.

GRAPHICAL ABSTRACT      

A Facile and One‐pot Synthetic Route to Functionalized Ethyl 3‐(Alkanoyl)‐2‐(alkyl imino)‐2,3‐dihydrothiazole‐4‐carboxylate Derivatives under Mild,Solventand Catalyst‐free Conditions

A new one‐pot, four‐component synthetic rout is reported for the preparation of functionalized N‐acyl‐2alkylimino‐2,3‐dihydrothiazole derivatives from the reaction between acid chlorides, ammonium thiocyanate, primary alkylamines, and ethyl bromopyruvate under mild, solvent‐ and catalyst‐free conditions at room temperature. This completely green and efficient straight forward procedure led to the desired products in good to high yields without any need to catalyst or solvent assistance and no by product was observed in all the reactions     

Interplay between size, composition, and phase transition of nanocrystalline Cr(3+)-doped BaTiO3 as a path to multiferroism in perovskite-type oxides

Multiferroics, materials that exhibit coupling between spontaneous magnetic and electric dipole ordering, have significant potential for high-density memory storage and the design of complex multistate memory elements. In this work, we have demonstrated the solvent-controlled synthesis of Cr(3+)-doped BaTiO(3) nanocrystals and investigated the effects of size and doping concentration on their structure and phase transformation using X-ray diffraction and Raman spectroscopy. The magnetic properties of these nanocrystals were studied by magnetic susceptibility, magnetic circular dichroism (MCD), and X-ray magnetic circular dichroism (XMCD) measurements. We observed that a decrease in nanocrystal size and an increase in doping concentration favor the stabilization of the paraelectric cubic phase, although the ferroelectric tetragonal phase is partly retained even in ca. 7 nm nanocrystals having the doping concentration of ca. 5%. The chromium(III) doping was determined to be a dominant factor for destabilization of the tetragonal phase. A combination of magnetic and magneto-optical measurements revealed that nanocrystalline films prepared from as-synthesized paramagnetic Cr(3+)-doped BaTiO(3) nanocrystals exhibit robust ferromagnetic ordering (up to ca. 2 μ(B)/Cr(3+)), similarly to magnetically doped transparent conducting oxides. The observed ferromagnetism increases with decreasing constituent nanocrystal size because of an enhancement in the interfacial defect concentration with increasing surface-to-volume ratio. Element-specific XMCD spectra measured by scanning transmission X-ray microscopy (STXM) confirmed with high spatial resolution that magnetic ordering arises from Cr(3+) dopant exchange interactions. The results of this work suggest an approach to the design and preparation of multiferroic perovskite materials that retain the ferroelectric phase and exhibit long-range magnetic ordering by using doped colloidal nanocrystals with optimized composition and size as functional building blocks.     

Preparation of a carbon ceramic electrode modified by 4-(2-pyridylazo)-resorcinol for determination of trace amounts of silver

A 4-(2-pyridylazo)-resorcinol (PAR)-modified carbon ceramic electrode (CCE) prepared by the sol-gel technique has been reported for the first time in this paper. By immersing the CCE in aqueous solution of PAR (0.001 mol L⁻¹), after a short period of time, a thin film of PAR was rapidly formed on the surface of the electrode due to its strong adsorption properties. A differential pulse anodic stripping voltammetric (DPASV) method was developed for determination of Ag(I) at the modified carbon ceramic electrode. The analysis procedure consisted of an open circuit accumulation step in a sample solution which was continuously stirred for 12 min. This was followed by replacing the medium with a clean solution where the accumulated Ag(I) was reduced for 15 s in −0.6 V. Then, the potential was scanned from −0.2 to +0.2 V to obtain the voltammetric peak. The detection limit of silver(I) was 0.123 μg L⁻¹, and for seven successive determinations of 10, 100 and 200 μg L⁻¹ Ag(I), the relative standard deviations were 2.1, 1.4 and 1.03%, respectively. The calibration curve was linear for 0.5-300 μg L⁻¹ silver(I). The procedure was applied to determine silver(I) in X-ray photographic films and super-alloy samples.     

Synthesis of manganese oxide nanocrystal by ultrasonic bath: effect of external magnetic field

A novel technique was used for the synthesis of manganese oxide nanocrystal by applying an external magnetic field (EMF) on the precursor solution before sonication with ultrasonic bath. The results were compared in the presence and absence of EMF. Manganese acetate solution as precursor was circulated by a pump at constant speed (7 rpm, equal to flow rate of 51.5 mL/min) in an EMF with intensity of 0.38 T in two exposure times (t_MF, 2 h and 24 h). Then, the magnetized solution was irradiated indirectly by ultrasonic bath in basic and neutral media. One experiment was designed for the effect of oxygen atmosphere in the case of magnetic treated solution in neutral medium. The as prepared samples were characterized with X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (HRTEM, TEM), energy-dispersive spectrum (EDS), and superconducting quantum interference device (SQUID) analysis. In neutral medium, the sonication of magnetized solution (t_MF, 24 h) led mainly to a mixture of Mn₃O₄ (hausmannite) and γ-MnOOH (manganite) and sonication of unmagnetized solution led to a pure Mn₃O₄. In point of particle size, the larger and smaller size of nanoparticles was obtained with and without magnetic treatment, respectively. In addition, the EMF was retarded the nucleation process, accelerated the growth of the crystal, and increased the amount of rod-like structure especially in oxygen atmosphere. In basic medium, a difference was observed on the composition of the products between magnetic treated and untreated solution. For these samples, the magnetic measurements as a function of temperature were exhibited a reduction in ferrimagnetic temperature to T_c = 39 K, and 40 K with and without magnetic treatment, respectively. The ferrimagnetic temperature was reported for the bulk at T_c = 43 K. A superparamagnetic behavior was observed at room temperature without any saturation magnetization and hysteresis in the measured field strength. The effect of EMF on the sample prepared in the basic medium was negligible but, in the case of neutral medium, the EMF affected the slope of the magnetization curves. The magnetization at room temperature was higher for the samples obtained in neutral medium without magnetic treatment. In addition, a horizontal shift loop was observed in neutral medium at low temperature.     

Highly selective and sensitive copper(II) membrane coated graphite electrode based on a recently synthesized Schiff’s base

A PVC membrane electrode based on bis-2-thiophenal propanediamine (TPDA) coated directly on graphite is described. The electrode exhibits a Nernstian response for Cu²⁺ over a very wide concentration range (1.0×10⁻¹ to 6.0×10⁻⁸ M) with a detection limit of 3.0×10⁻⁸ M (2.56 ng ml⁻¹). It has a fast response time and can be used for at least 2 months without any major deviation. The proposed sensor revealed very good selectivities for Cu²⁺ over a wide variety of other metal ions and could be used in the pH range of 3.0–7.0. It was successfully used for direct determination of copper in black tea and as an indicator electrode in potentiometric titration of copper ion.