A Uniaxial Optimal Perfectly Matched Layer Method for Time-harmonic Scattering Problems

We develop a uniaxial optimal perfectly matched layer （opt PML） method for solving the time-harmonic scattering problems by choosing a particular absorbing function with unbounded integral in a rectangular domain. With this choice, the solution of the optimal PML problem not only converges exponentially to the solution of the original scatting problem, but also is insensitive to the thickness of the PML layer for sufficiently small parameter ε0. Numerical experiments are included to illustrate the competitive behavior of the proposed optimal method.     

实现金属环动态拉伸的电磁加载技术研究

描述了实现金属环动态拉伸的电磁膨胀环实验方法,改进了快速放电和短路开关两个实现自由膨胀的关键问题,为研究材料本构关系、动态断裂和破碎提供了一条简单而实用的加载途径。主回路电流由Rogowski线圈测量获得,金属环的膨胀速度由狭缝扫描相机测量得到,并由电动力学方程可计算出金属环中的流动应力、应变、应变率以及温升等动态力学参数。     

物理环境对人发结构特性的影响研究

研究了电吹风、紫外线照射等物理环境对人发形态结构、直径、断裂力的影响。结果表明,电吹风的吹干和紫外线长时间的照射均会对头发造成一定程度的损伤。     

红砂岩单轴压缩条件下震源时空演化特征及破裂机制实验研究

为建立岩石工程灾害精准预测预报体系,本文进行了红砂岩试件震源时空演化特征及破裂机制实验研究.采用单轴加载方式,以声发射技术和数字散斑相关方法进行实验数据的采集,基于矩张量反演方法,分析岩石变形局部化带相对位移速率和震源体积参数、裂纹能量的对应关系,探讨岩石破裂机制及前兆特征.研究结果表明:(1)岩石承载力受变形局部化结...     

1 053-nm all-fiber pulse multi-pass stretcher using a linear chirped fiber Bragg grating

An all-fiber optical laser pulse multi-pass stretcher using a chirped fiber Bragg grating (CFBG) is demonstrated. Pulses from a 1 053-nm mode-locked fiber seed oscillator are stretched by multiple passing through a chirped fiber grating set in a fiber regenerative amplifier structure. We stretch the pulse from 16 ps to 1.855 ns after it transmits seven loops in the stretcher. The main factors that affect the stretching results are discussed.     

Casson fluid flow and heat transfer over a nonlinearly stretching surface

A boundary layer analysis is presented for non-Newtonian fluid flow and heat transfer over a nonlinearly stretching surface. The Casson fluid model is used to characterize the non-Newtonian fluid behavior. By using suitable transformations, the governing partial differential equations corresponding to the momentum and energy equations are converted into non-linear ordinary differential equations. Numerical solutions of these equations are obtained with the shooting method. The effect of increasing Casson parameter is to suppress the velocity field. However the temperature is enhanced with the increasing Casson parameter.     

Spin gapless armchair graphene nanoribbons under magnetic field and uniaxial strain

Using Green＇s function method, we investigate the spin transport properties of armchair graphene nanoribbons （AG- NRs） under magnetic field and uniaxial strain. Our results show that it is very difficult to transform narrow AGNRs directly from semiconductor to spin gapless semiconductors （SGS） by applying magnetic fields. However, as a uniaxial strain is exerted on the nanoribbons, the AGNRs can transform to SGS by a small magnetic field. The combination mode be- tween magnetic field and uniaxial strain displays a nonmonotonic arch-pattern relationship. In addition, we find that the combination mode is associated with the widths of nanoribbons, which exhibits group behaviors.     

“自愈”橡胶

橡胶是一种极易拉伸的材料,但它一旦被切断就很难再黏合在一起,最近法国Ecole化学物理研究所的L．Leibler教授和他的同事们,研究出了一种能“自愈（self-healing）”的新型橡胶,若把这种新型的橡胶切成两块后,再将它们轻轻地对上几分钟后,无需加热或挤压,在室温下就能重新黏合在一起,黏合后的橡胶依然保持着各方向可拉伸的特性．更奇妙的是,新材料在断裂12小时后仍然具有可“自愈”的能力,如果两个断裂面的接触时间越长,新橡胶的“自愈”程度就会越好。     

三段加热系统对大尺寸MPOF预制棒一步拉伸工艺

采用自行设计的微结构聚合物光纤专用拉丝系统对大尺寸微结构聚合物光纤预制棒的一步拉伸工艺进行了研究.该微结构聚合物光纤加热系统采用三段式梯度加热,可保持炉内温度的控制准确度在±2℃以内.在保持送料速度与牵引速度恒定、协调的条件下,通过对温度场温度梯度控制优化,确定了最佳拉丝温度组合,并得到了直径规格310 μm、标准偏差为±20 μm的较高质量的微结构聚合物光纤.     

FeCoCrCuNi高熵合金裂纹及孔洞结构力学与微观构象演化机理的分子动力学模拟研究

本文采用分子动力学方法研究了FeCoCrCuNi高熵合金裂纹及孔洞模型结构在不同轴向拉伸应变速率下的力学与微观结构演化机理. 结果表明：应变速率越高FeCoCrCuNi裂纹结构对应更高的过冲应变和过冲应力，其主要原因是高拉伸速率会导致高强度的BCC结构及孪晶结构的生成，而BCC结构及孪晶结构的产生进而会抑制应力的下降，通过应力-应变曲线，可知FeCoCrCuNi裂纹模型在轴向应力作用下表现为塑性形变. 对于不同尺寸的孔洞FeCoCrCuNi裂纹模型的应力模拟与结构分析，可以得出：孔洞尺寸越大, FeCoCrCuNi裂纹结构对应的过冲应变和过冲应力越小，其主要原因是大尺寸的孔洞造成孔洞之间产生裂纹的，进而会影响这个材料的屈服应变和屈服强度.