Sb2S3纳米粒子修饰ZnO纳米片微纳分级结构的光电化学性能

采用恒电位方法,选择氯化钾和乙二胺(EDA)为添加剂,在氧化铟锡(ITO)导电玻璃上制备了高度有序的ZnO纳米片阵列,通过二次电沉积得到了ZnO纳米片上生长纳米棒的微纳分级结构.利用化学浴沉积法在ZnO基底上沉积Sb₂S₃纳米粒子制备出了Sb₂S₃/ZnO纳米片壳核结构和Sb₂S₃/ZnO微纳分级壳核结构.利用扫描电子显微镜(SEM)、X射线衍射(XRD)、紫外-可见(UV-Vis)吸收光谱、瞬态光电流等对其形貌、结构组成和光电化学性能进行了表征和分析.结果表明, Sb₂S₃/ZnO纳米片上生长纳米棒分级壳核结构的光电流明显高于Sb₂S₃/ZnO纳米片壳核结构.在Sb₂S₃/ZnO纳米片壳核结构和Sb₂S₃/ZnO微纳分级壳核结构的基础上旋涂一层P3HT薄膜形成P3HT/Sb₂S₃/ZnO复合结构,以上述复合结构薄膜为光活性层组装成杂化太阳电池,其中, P3HT/Sb₂S₃/ZnO分级壳核结构杂化太阳电池的能量转换效率最高,达到了0.81%.     

纳米薄层分子筛的合成与应用

纳米薄层分子筛(nanosheets zeolite)由于其独特的准二维结构,具有有序的微孔-介孔特征、适宜的表面酸性和良好的扩散性能,已成为分子筛控制合成及其应用研究中标志性的研究热点之一。该类分子筛在合成中采用不同双头或者多头季铵盐(碱)表面活性剂作结构导向剂,所得的纳米薄层分子筛具有晶面二维生长趋向和可控薄层交错形貌,在吸附、催化应用等多方面展现出独特的应用潜力。本文系统总结了季铵盐类表面活性剂对纳米薄层分子筛合成、物化性质的影响以及此类分子筛催化应用研究方面的最新进展,着重介绍了MFI结构的纳米薄层分子筛对甲醇转化制烃、贝克曼重排、异构化、烯烃环氧化等重要催化反应中的优势。最后对这种结构新颖的纳米薄层分子筛在合成和其他应用领域方面未来的研究方向进行了展望。     

Two-Dimensional Metal–Organic Framework Nanosheets with Cobalt-Porphyrins for High-Performance CO2 Electroreduction

The electrochemical reduction of CO₂ presents a promising strategy to mitigate the greenhouse effect and reduce excess carbon dioxide emission to realize a carbon-neutral energy cycle, but it suffers from the lack of high-performance electrocatalysts. In this work, catalytic active cobalt porphyrin [TCPP(Co)=(5,10,15,20)-tetrakis(4-carboxyphenyl)porphyrin-Co^II] was precisely anchored onto water-stable 2D metal–organic framework (MOF) nanosheets (Zr-BTB) to obtain ultrathin 2D MOF nanosheets [TCPP(Co)/Zr-BTB] with accessible catalytic sites for the CO₂ reduction reaction. Compared with molecular cobalt porphyrin, the TCPP(Co)/Zr-BTB exhibits an ultrahigh turnover frequency (TOF=4768 h⁻¹ at −0.919 V vs. reversible hydrogen electrode, RHE) owing to high active-site utilization. In addition, three post-modified 2D MOF nanosheets [TCPP(Co)/Zr-BTB-PABA, TCPP(Co)/Zr-BTB-PSBA, TCPP(Co)/Zr-BTB-PSABA] were obtained, with the modifiers of p-(aminomethyl)benzoic acid (PABA), p-sulfobenzoic acid potassium (PSBA), and p-sulfamidobenzoic acid (PSABA), to change the micro-environments around TCPP(Co) through the tuning of steric effects. Among them, the TCPP(Co)/Zr-BTB-PSABA exhibited the best performance with a faradaic efficiency (FE_CO) of 85.1 %, TOF of 5315 h⁻¹, and j_total of 6 mA cm⁻² at −0.769 V (vs. RHE). In addition, the long-term durability of the electrocatalysts is evaluated and the role of pH buffer is revealed.     

二硫化钨纳米片制备及其钙钛矿太阳能电池空穴传输层应用

开发新型无机空穴传输层材料是钙钛矿电池实现商业应用的重要挑战之一。本文开展了二硫化钨纳米片制备及其钙钛矿太阳能电池空穴传输层应用研究。采用液相超声剥离法成功制备了WS 2纳米片,并将其引入钙钛矿太阳能电池中用作空穴传输层。结果表明,当WS 2纳米片溶液浓度为1 mg/mL时,制备的WS 2纳米片空穴传输层具有较合适的厚度,并且后续在其上生长的钙钛矿活性层成膜质量高、结晶性能好,电池取得6.3%的光电转换效率。结果证实WS 2纳米片可作为新型无机空穴传输层材料用于钙钛矿太阳能电池。     

Facile Synthesis and Size Control of 2D Cyclodextrin-Based Metal–Organic Frameworks Nanosheet for Topical Drug Delivery

In this work, a 2D nanosheet (NS) of γ-cyclodextrin (CD)-based metal–organic frameworks (MOFs) is synthesized through a facile green chemistry approach. NS-MOF carrier is constructed using a water system in a simple one-pot reaction involving CD and potassium carbonate. Particle size optimization is achieved by adjusting the reaction temperature and the introduction of crystal growth suppressor (appropriate proportion of acetone). The NS-MOF stability in aqueous medium is improved by polymerization reaction of crosslinked CD-MOF (CL-CD-MOF) without blocking its cavity for drug loading. The effects of particle geometry and size of nanoporous materials on their pharmacokinetics during drug delivery are compared between the sheet-like DXM@CL-NS-MOF and 3D-cubic-shaped DXM@CL-CD-MOF loaded with the same quantity of dexamethasone (DXM). The bioefficiency of these carriers in tear fluids and aqueous humors to deliver DXM is investigated in vivo. The results demonstrate that the 2D-nanosheet particles significantly improve precorneal residence time and intraocular bioavailability over the commercial Maxidex (0.1% dexamethasone) and its 3D-cubes counterpart of similar chemical composition. It suggests that the geometry of a carrier play a significant role in the biodistribution, and the carrier of CL-NS-MOF is a good candidate for ocular drug delivery.     

Preparation of Hierarchical Porous Activated Carbon from Banana Leaves for High-performance Supercapacitor: Effect of Type of Electrolytes on Performance

We demonstrate a facile efficient way to fabricate activated carbon nanosheets (ACNSs) consisting of hierarchical porous carbon materials. Simply heating banana leaves with K₂CO₃ produce ACNSs having a unique combination of macro-, meso- and micropores with a high specific surface area of ∼1459 m² g⁻¹. The effects of different electrolytes on the electrochemical supercapacitor performance and stability of the ACNSs are tested using a two-electrode system. The specific capacitance (C_sp) values are 55, 114, and 190 F g⁻¹ in aqueous 0.5 M sodium sulfate, organic 1 M tetraethylammonium tetrafluoroborate in acetonitrile, and pure ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]) electrolytes, respectively. The ACNSs also shows the largest potential window of 3.0 V, the highest specific energy (59 Wh kg⁻¹) and specific power (750 W kg⁻¹) in [BMIM][PF₆]. A mini-prototype device is prepared to demonstrate the practicality of the ACNSs.     

Sub-10 nm V2O5 Crystals on Carbon Nanosheets for Advanced All-Solid-State Lithium Metal Batteries

V₂O₅, as a lithium-free cathode material, has inherent defects such as sluggish kinetics and volume change and, at the same time, requires a lithium metal anode that tends to form dendrites in liquid electrolytes. Both the lithium dendrite and the flammable electrolyte solvent bring longtime safety issues. This work introduces nonflammable inorganic–organic composite solid electrolyte to inhibit the growth of the lithium dendrite and suppress the instability caused by V₂O₅ nanometerization. However, the long-term cycling and rate performances are still insufficient even when reducing V₂O₅ size to about 50 nm. As an improvement, sub-10 nm V₂O₅/C nanosheets are designed and prepared using corn stalks as precursors through simple impregnation and calcination process. The V₂O₅/C offers a much better electrode/electrolyte contact and interface stability than bulk V₂O₅ and commercial V₂O₅ in the inorganic–organic composite solid electrolyte. The discharge capacity is 228 mAh g⁻¹ at 0.1 C after 50 cycles and ≈110 mAh g⁻¹ at 2.0 C.     

2D Nb4N5 Nanosheets Synthesized by a Template Method

Niobium nitrides possess superconductivity and stable chemical stability, which render them desirable candidates for energy storage. Therefore, they deserve exploration for potential energy storage applications. Here we report on the synthesis of 2D Nb₄N₅ nanosheets by ammonization of NbS₂ nanosheets as templates at 700 °C. The obtained 2D Nb₄N₅ nanosheets retain their hexagon shape and display a porous structure with a pore size of 3.716 nm. These 2D Nb₄N₅ nanosheets exhibit capacitor behavior as electrode materials for energy storage. This study opens a new avenue in synthesizing 2D materials based on 2D templates.     

Synthesis of Co3O4/Carbon Heteroaerogels with Ultrahigh Capacitance via Polyethyleneimine Intercalation of Co2BIM4 Nanosheets

The development of metal–organic frameworks (MOFs)-based supercapacitors have attracted intense concentration in recent years due to their regularly arranged porous and tunable pore sizes. However, the performance of the MOFs-derived supercapacitors is also low because of their poor electrical conductivity and rarely accessible active sites. In the present work, we developed a Co-MOF (namely Co₂BIM₄, BIM=benzimidazole) nanosheets derived Co₃O₄/nitrogen-doped carbon (Co₂BIM₄-Co₃O₄/NC) heteroaerogel as a novel supercapacitor electrode. The 3D Co₂BIM₄-Co₃O₄/NC heteroaerogels were obtained by directly intercalating polyethyleneimine (PEI) into the interlayers of Co₂BIM₄ nanosheets and following by carbonizing the resulting Co₂BIM₄/PEI composite. The Co₂BIM₄-Co₃O₄/NC electrode possessed 3D conductive framework with an overlapped hetero-interface and expanded interlayers, leading to fast and stable charge transfer/diffusion and an enhanced pseudocapacitance performance. Therefore, the Co₂BIM₄-Co₃O₄/NC electrode showed ultrahigh capacitance of 2568 F g⁻¹ at 1 A g⁻¹, 1747 F g⁻¹ at 10 A g⁻¹, and excellent long cycling time with a capacitance preservation of 92.7 % following 10000 cycles at 10 A g⁻¹, which is very promising for applications in supercapacitors and other energy storage devices.