Dielectric relaxation and ac conduction in multiferroic Bi0.8Gd0.1Pb0.1Fe0.9Ti0.1O3 ceramics: impedance spectroscopy analysis

ABSTRACT

The solid solutions of Bi_0.8Gd_0.1Pb_0.1Fe_0.9Ti_0.1O₃ have been prepared by the solid-state reaction method. The preliminary structural studies were carried out by X-ray diffraction technique showing the formation of polycrystalline sample with ABO₃ type of perovskite structure with hexagonal symmetry for the Bi_0.8Gd_0.1Pb_0.1Fe_0.9Ti_0.1O₃ ceramic system at room temperature. Dielectric properties and impedance study of this ceramic have been characterized in the temperature range room temperature to 375 °C and frequency range 100 Hz–1 MHz. The maximum ferroelectric transition temperature (T_c) of this system was in the range 200 °C–260 °C with the dielectric constant of peak to be ～30,170 at 1 kHz. The complex impedance plot exhibited one impedance semicircle observed at low temperature, whereas two semicircles above 80 °C and the centres of the semicircles lie below the real axis, which indicates that the material is non-Debye type. Single semicircle is explained by the grain effect of the bulk and double semicircle is due to the bulk and grain boundary effect. The bulk resistance and grain boundary resistance of the materials decrease with the increasing temperature, showing negative temperature and a typical semiconducting property, i.e. negative temperature coefficient of resistance behaviour.     

Direct measurement of precipitate induced strain in an Al-Zn–Mg-Cu alloy with aberration corrected transmission electron microscopy

Precipitates and their associated strain fields significantly influence mechanical properties and, consequently, the industrial performance of aluminum alloys. In this work, we present a direct measurement of strains induced by η′ and η precipitates in an Al-Zn-Mg-Cu alloy using aberration-corrected high-resolution transmission electron microscopy and quantitative strain analysis. The results demonstrate that the strain induced by precipitates in the Al-Zn-Mg-Cu alloy shows significant tensile strains perpendicular to the longitudinal direction of the precipitate discs on the side of the discs and along the longitudinal direction at both ends of the η′ and η precipitates. This strain field can be described by an equivalent dislocation model, in which the lattice mismatch between the precipitate and the matrix is equivalent to a series of dislocation pairs along the precipitate/matrix interfaces.     

高精度动态光纤应变传感研究

传统的光纤应变传感技术无法在满足高精度和强环境适应性的同时实现稳定的动态应变传感.为了解决该问题,本文将光干涉原理应用于光纤应变传感,设计了一种强环境适应性的基于干涉结构的高精度光纤应变传感系统,基于扫频干涉信号的互相关系数,该系统可以稳定地探测应变.本文还提出一种动态探测算法,该算法弥补了系统只能探测较小应变的缺陷,大大提升了实际应变的探测范围,同时还实现了动态的应变检测;采用三次样条插值算法,提升了小应变探测的精度.理论分析和仿真模拟表明,在加入白噪声的信号信噪比为15dB时,插值后的探测精度是未插值探测精度的2.3倍,插值后本系统探测结果的最大误差只有约9nε.     

Bound to continuum intersubband transition optical properties in the strain reducing layer-assisted InAs quantum dot structure

In this paper, the impact of wetting layer, strain reducing layer and dot height on the electronic, linear and nonlinear optical properties of bound to continuum states transitions are investigated in a system of InAs truncated conical shaped quantum dot covered with the In_xGa_1−x As strain reducing layer. The electronic structure, containing two main states of S and wetting layer states (WL), was calculated by solving one electronic band Hamiltonian with effective-mass approximation. The results reveal that the presence of the strain reducing layer in the structure extends the quantum dot emission to longer wavelength which is reported as a red-shift of the photoluminescence (PL) peak in the experimental measurement. This study also highlights the possibility of improving the intersubband optical properties based on the significant size-dependence of the three layer dot matrix by employing the strain reducing and wetting layers. According to this simulation, relatively tall dots on the thick wetting layer introduce the optimized structure size for practical applications to meet the SRL assisted enhanced dot structure.     

Stability of strain gradient elastic bars in tension

Equilibrium of a bar under uniaxial tension is considered as optimization problem of the total potential energy. Uniaxial deformations are considered for a material with linear constitutive law of strain second gradient elasticity. Applying tension on an elastic bar, necking is shown up in high strains. That means the axial strain forms two homogeneously deformed sections in the ends of the bars and a section in the middle with high variable strain. The interactions of the intrinsic (material) lengths with the non linear strain displacement relations develop critical states of bifurcation with continuous Fourier’s spectrum. Critical conditions and post-critical deformations are defined with the help of multiple scales perturbation method. An erratum to this article can be found at     

Bending of an elastoplastic strip with isotropic and kinematic hardening

Summary  We propose an exact analysis for finite bending of a compressible elastoplastic strip with combined hardening at a given stretch normal to the bending plane. We apply the self-consistent eulerian rate-type elastoplastic model based on the logarithmic rate, in conjunction with a Tresca-type loading function. Utilizing the maximum circumferential stretch at the outer surface as an independent parameter, we derive exact analytic expressions for the bending angle, the bending moment, the outer and inner radii, the radii of the two elastic-plastic interfaces and the circumferential stretches at these two interfaces, as well as the stress distributions in every current cross section. In particular, we establish an explicit relation between the two circumferential stretches at the two elastic-plastic interfaces, and we show that this relation is universal for all cases of hardening. We show also that the maximum and minimum circumferential stretches at the outer and inner surfaces obey a reciprocal relation in the course of both elastic and elastic-plastic deformations. Received 4 June 2002; accepted for publication 14 November 2002 This research was carried out under financial support from the German Science Foundation (DFG) (Contract No.: Br. 580/26-2) and from Alexander von Humboldt Foundation. We wish to express our sincere gratitude to these Foundations.     

LP—MOCVD研制InGaAs/InP应变量子阱LD

本文指出在LP-MOCVD生长过程中,采用量子阱有源区和上限制层不同的生长温度以及生长非掺杂过渡层等技术能有效地控制InGaAs/InP量子阱激光器的p-n结结位,给出了采用DEZn和H₂S做掺杂源在InP材料中p型和n型杂质溶度和p-n结控制的条件,并研制出有源区阱层InGaAs与InP存在0.5%压缩应变量子阱激光器,这一结构LD实现室温脉冲激射,得到峰值功率为106mW以上,阈值电流密度为2.6kA/cm².     

An Alternative Mechanism of Non-contact Anterior Cruciate Ligament Injury During Jump-landing: In-vitro Simulation

In the United States, an estimated 100,000 anterior cruciate ligament (ACL) injuries occur every year. Despite decades of research, to this date, the mechanism or mechanisms of non-contact ACL injuries are not well understood. This is primarily because trials cannot be conducted on live subjects to understand the injury mechanism, and it is difficult to instrument a live human knee to measure the response of tissues during dynamic activities. In this paper, we present a dynamic knee injury simulator capable of in-vitro modeling of the ACL injury during jump-landing activity. This system was used to simulate jump-landing on cadaveric knees and to successfully test which conditions would result in isolated ACL injury. A restricted flexion of the hip (a hip that flexes minimally or not at all during landing), combined with low quadriceps and hamstring force levels during landing were found to be conducive to ACL injury. Elevated levels of quadriceps force prevented the injury from occurring even under restricted hip flexion conditions. The measured strain rates in the ACL tissue during injury causing activities were over 250%/s.     

正交试验设计在麦白霉素高产菌株选育中的应用

本文应用正交试验设计改进了麦白霉素的生产工艺，在四个关键环节上选出了比对照组高出７００μ／ｍｌ以上的高产稳定菌株。该法使试验次数减少，选育周期缩短，既节省了人力物力和降低了生产成本，又增加了麦白霉素药粉的产量，取得了可观的经济效益。     

An evolutionary method for optimization of plate buckling resistance

Optimization of plate buckling resistance is very complicated, because the in-plane stress resultants in the prebuckled state of a plate are functions of thickness distribution. This paper discusses the problem of finding the optimum thickness distribution of isotropic plate structures, with a given volume and layout, that would maximise the buckling load. A simple numerical method using the finite-element analysis is presented to obtain the optimum thickness distribution. Optimum designs of compression-loaded rectangular plates with different boundary conditions and plate aspect ratios are obtained by using the proposed method. Optimum designs from earlier studies and the methods of buckling analysis used to attain these results are discussed and compared with the designs from the proposed method. This paper also examines the reliability of the optimality criterion generally used for plate buckling optimization, which is based on the uniform strain energy density.