Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.     

Identifying acetylated lignin units in non-wood fibers using pyrolysis-gas chromatography/mass spectrometry

A series of non-wood plant fibers, namely kenaf, jute, sisal and abaca, have been analyzed upon pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) of the whole material. The pyrolysis products mainly arise from the carbohydrate and lignin moieties of the fibers. The lignin-derived phenols belonged to the p-hydroxyphenylpropanoid (H), guaiacylpropanoid (G) and syringylpropanoid (S) structures, and showed a high S/G ratio of between 2.0 and 5.4, the highest corresponding to kenaf. Among the lignin-derived phenols released, small amounts of sinapyl and coniferyl acetates (in both cis- and trans-forms) were identified for the first time upon Py-GC/MS of lignocellulosic materials. Acetylation of the sinapyl and coniferyl alcohols was at the gamma-position of the side chain. The release of these alcohols derived from intact acetylated lignin units upon pyrolysis seems to indicate that the native lignin in the fibers selected for this study is at least partially acetylated. Sinapyl (and coniferyl) acetates have recently been suggested to be authentic lignin precursors involved in the polymerization of lignin along with the normal sinapyl and coniferyl alcohols. Py-GC/MS will offer a convenient and rapid tool for analyzing naturally acetylated lignins, as well as to screen plant materials for the presence of acetylated units in lignin.     

Reduction of sulfoxides with boranes catalyzed by MoO2Cl2

The first example of an organic reduction with boranes catalyzed by a high valent oxo-complex is reported. The systems catecholborane/MoO₂Cl₂(H₂O)₂ (5 mol %) and BH₃·THF/MoO₂Cl₂ (5 mol %) proved to be very efficient for the reduction of sulfoxides to the corresponding sulfides in excellent yields.     

UV-LYSOGENIC INDUCTION OF Λ PHAGE IN lexA1 MUTANTS OF Escherichia coli: KINETICS OF THE PROCESS

Abstract— Although the lex gene has been described until recently as being required for lysogenic induction, both our work and the work of others have reported Λ prophage induction in some lexA mutants. However, the characteristics of the process were not defined. We describe UV induction of prophage in a lexA1 mutant at a slightly lower level and requiring 2 times longer than the wild type. As demonstrated in some work, in cells treated with low levels of rifampicin (RIF) no new synthesis of RecA protein is needed for the prophage induction although the onset of lysis is delayed. We suggest that the lysogenic induction in lexA cells is due to the same mechanism that induces prophage in the wild type cells treated with RIF. That is, the induction is due to the cleavage of Λ represser by the basal RecA protease in the DNA-single-strand gap, since RecA protease and monomer represser both have high affinity for this type of DNA. So, LexA protein need not be cleaved for the prophage induction.
No Weigle-reactivation (WR) was detected in the lex mutant even after a long post-irradiation incubation, suggesting that unlike prophage induction, WR requires LexA protein cleavage.     

Analytical applications of the o-dianisidine-persulfate reaction: Kinetic determination of silver and cobalt

A kinetic method for the silver determination based on the catalytic effect of Ag(I) on the oxidation of o-dianisidine by persulfate at pH = 4.5 in the presence of 1,10-phenanthroline is proposed. Ag(I) can be determined by measuring the absorbance of the reaction product at 450 nm, using the fixed time method. Co(II) does not have a catalytic effect in the reaction, but in the simultaneous presence of silver and cobalt the reaction shows an induction period the length of which is related to the Ag/Co molar ratio. As a consequence, two new methods for the determination of cobalt and silver using the induction period method are proposed. The two methods for silver are applied to the determination of silver in lead.     

Characterization of a Thermotolerant and Alkalotolerant Xylanase from a Bacillus sp.

In a recent screening for thermophilic bacteria from Azores hot springs, a Bacillus sp strain 3M, exhibiting cellulase-free extracellular xylanolitic activity, was isolated. Further enzyme characterization from liquid cultures grown on birchwood xylan revealed that the endo-l,4-βxylanase retains 100% of activity for at least 3 d at 55°C. At 80°C, it retains 47% of its maximal activity, and the enzyme is still active at 90°C. The optimum pH of the enzyme has a broad pH range, between 6.0 and 7.5, and it is remarkably active for the alkaline region, exhibiting 89% of relative activity at pH 9.O. The enzyme was partially inactivated by different divalent metal ions. Because of its tolerance for high temperature and pH conditions, and the absence of contaminating cellulase activity, the xylanase produced byBacillus sp 3M appears to be attractive for use in the pulp and paper industry. Indeed, the efficiency of the enzyme application to the kraftEucalyptus pulp was studied for bleaching pretreatment, resulting in a moderate increase of pulp bleachability.     

Non-coherent visible and infrared radiation increase survival to UV (254 nm) in Escherichia coli K12

Interactions between visible or infrared (IR) and ultraviolet (UV, 254 nm) radiation have been studied in E. coli. Pre-illumination with non-coherent monochromatic 446, 466, 570 and 685 nm radiation, as well as with polychromatic red and IR radiation at room temperature, leads to increased cell survival after a subsequent irradiation with UV light. In the thermic range of the spectrum (red and IR), IR but not red light pre-treatment is able to increase cell survival to a subsequent lethal heat (51 degrees C) challenge, suggesting that increased UV survival may be due to IR-induced heat-shock response. On the other hand, visible-light-induced resistance may be due to a different mechanism, possibly involved with unknown bacterial light receptors.     

Heterogeneous reactions of solid nickel(II) complexes,V

The kinetics of the thermal decomposition of solid complexes of the type Ni(NCS)₂L₂ (L=pyridine,β-picoline and quinoline), of pseudooctahedral configuration, were studied by using isothermal methods, on the basis of losses of weight, in the temperature range 90–191?. The most suitable reaction order for all the complexes under investigation was found to ben=2/3, i.e. the total decomposition rate is determined by the chemical process proper. The calculated values ofE _a(in kcal · mole^?1) decrease in the following order: Ni(NCS)₂py₂ (29.4)>Ni(NCS)₂(β-pic)₂ (27.6)>Ni(NCS)₂Q₂ (24.3). With increasing volume of the ligand L the reaction rate also increases, and this suggests that the reaction proceeds by dissociative activation. For all the investigated complexes it was found that δH>E _A; this may be explained by a several-step mechanism and the complex Ni(NCS)₂L is then considered an intermediate.     

An Infrared Spectroscopic Study on the Hofmann-diam-type 1,12-Diaminododecanemetal(II) Tetracyanonickelate(II)-aromatic Guest Clathrates: M(H2N(CH2)12NH2)Ni(CN)4ċG(M=Co, Ni or Cd; G = Benzene, Naphthalene, Anthracene, Phenanthrene or Biphenyl)

Three Hofmann-diaminododecane-type clathrates of the form M(1,12-diaminododecane) Ni(CN)₄G (M = Co, Ni or Cd; G = benzene, naphthalene, anthracene, phenanthrene or biphenyl) have been prepared in powder form. The 1,12-diaminododecane molecules in the host lattice permit the inclusion of bulky guest molecules. The spectral features suggest that these compounds are similar in structure to the other Hofmann-diam-type clathrates.     

Effect of conformational changes on a one-electron reduction process: evidence of a one-electron P-P bond formation in a bis(phosphinine)

EPR spectra show that one-electron reduction of bis(3-phenyl-6,6-(trimethylsilyl)phosphinine-2-yl)dimethylsilane (1) on an alkali mirror leads to a radical anion that is localized on a single phosphinine ring, whereas the radical anion formed from the same reaction in the presence of cryptand or from an electron transfer with sodium naphthalenide is delocalized on the two phosphinine rings. Density functional theory (DFT) calculations show that in the last species the unpaired electron is mainly confined in a loose P-P bond (3.479 A), which results from the overlap of two phosphorus p orbitals. In contrast, as attested by X-ray spectroscopy, the P-P distance in neutral 1 is large (5.8 A). As shown by crystal structure analysis, addition of a second electron leads to the formation of a classical P-P single bond (P-P 2.389 A). Spectral modifications induced by the presence of cryptand or by a change in the reaction temperature are consistent with the formation of a tight ion pair that stabilizes the radical structure localized on a single phosphinine ring. It is suggested that the structure of this pair hinders internal rotation around the C-Si bonds and prevents 1 from adopting a conformation that shortens the intramolecular P-P distance. The ability of the phosphinine radical anion to reversibly form weak P-P bonds with neutral phosphinines in the absence of steric hindrance is confirmed by EPR spectra obtained for 2,6-bis(trimethylsilyl)-3-phenylphosphinine (2). Moreover, as shown by NMR spectroscopy, in this system, which contains only one phosphinine ring, further reduction leads to an intermolecular reaction with the formation of a classical P-P bond.