A Single Thermoresponsive Diblock Copolymer Can Form Spheres,Worms or Vesicles in Aqueous Solution

It is well‐known that the self‐assembly of AB diblock copolymers in solution can produce various morphologies depending on the relative volume fraction of each block. Recently, polymerization‐induced self‐assembly (PISA) has become widely recognized as a powerful platform technology for the rational design and efficient synthesis of a wide range of block copolymer nano‐objects. In this study, PISA is used to prepare a new thermoresponsive poly(N‐(2‐hydroxypropyl) methacrylamide)‐poly(2‐hydroxypropyl methacrylate) [PHPMAC‐PHPMA] diblock copolymer. Remarkably, TEM, rheology and SAXS studies indicate that a single copolymer composition can form well‐defined spheres (4 °C), worms (22 °C) or vesicles (50 °C) in aqueous solution. Given that the two monomer repeat units have almost identical chemical structures, this system is particularly well‐suited to theoretical analysis. Self‐consistent mean field theory suggests this rich self‐assembly behavior is the result of the greater degree of hydration of the PHPMA block at lower temperature, which is in agreement with variable temperature ¹H NMR studies.     

Ultrasonically assisted synthesis of barium stannate incorporated graphitic carbon nitride nanocomposite and its analytical performance in electrochemical sensing of 4-nitrophenol

We describe the ultrasonic assisted preparation of barium stannate-graphitic carbon nitride nanocomposite (BSO-gCN) by a simple method and its application in electrochemical detection of 4-nitrophenol via electro-oxidation. A bath type ultrasonic cleaner with ultrasonic power and ultrasonic frequency of 100 W and 50 Hz, respectively, was used for the synthesis of BSO-gCN nanocomposite material. The prepared BSO-gCN nanocomposite was characterized by employing several spectroscopic and microscopic techniques such as X-ray diffraction, X-ray photoelectron spectroscopy, fourier transform infra-red, field emission scanning electron microscopy, and high resolution transmission electron microscopy, to unravel the structural and electronic features of the prepared nanocomposite. The BSO-gCN was drop-casted on a pre-treated glassy carbon electrode (GCE), and their sensor electrode was utilized for electrochemical sensing of 4-nitrophenol (4-NP). The BSO-gCN modified GCE exhibited better electrochemical sensing behavior than the bare GCE and other investigated electrodes. The electroanalytical parameters such as charge transfer coefficient (α = 0.5), the rate constant for electron transfer (k_s = 1.16 s⁻¹) and number of electron transferred were calculated. Linear sweep voltammetry (LSV) exhibited increase in peak current linearly with 4-NP concentration in the range between 1.6 and 50 μM. The lowest detection limit (LoD) was calculated to be 1 μM and sensitivity of 0.81 μA μM⁻¹ cm⁻²_. A 100-fold excess of various ions, such as Ca²⁺, Na⁺, K⁺, Cl⁻, I⁻, CO₃²⁻, NO₃, NH₄⁺ and SO₄²⁻ did not able to interfere with the determination of 4-NP and high sensitivity for detecting 4-NP in real samples was achieved. This newly developed BSO-gCN could be a potential candidate for electrochemical sensor applications.     

Interaction of 1-acylamino-2,2-dichloroethenyl(triphenyl)phosphonium chlorides with alkanolamines

Abstract

It is shown that the interaction of 1-acylamino-2,2-dichloroethenyl(triphenyl)-phosphonium chlorides with alkanolamines having a primary amino group results in the formation of 4-oxazolylphosphonium salts containing hydroxyalkylamine substituents at position 5 of the oxazole cycle. Under similar conditions the reaction of N-substituted alkanolamines with 1-acylamino-2,2-dichloroethenyl-(triphenyl)phosphonium chlorides leads to the formation of 1,3-oxazolidin-2-ylidene derivatives, in which the triphenylphosphonium group is located in the side chain. The structure of the new synthesized compounds has been reliably proven by elemental analysis, IR, ¹Н, ¹³С, ³¹Р NMR spectroscopy, mass spectrometry and single crystal X-ray diffraction.     

IDose^4迭代重建技术应用于低剂量CT肾动脉血管造影的临床分析

为探讨IDose 4迭代重建技术在低剂量CT肾动脉血管造影中的应用价值,选取205例拟行肾动脉CT血管造影患者,随机将其分为4组,A组(51例)采用管电压100 kV、管电流100 mA,碘海醇370 mg I/mL及IDose 4迭代重建技术,B组(51例)采用管电压100 kV、管电流150 mA,碘海醇270 mg I/mL及IDose 4迭代重建技术,C组(51例)采用管电压80 kV、管电流180 mA,碘海醇270 mg I/mL及IDose 4迭代重建技术,D组(52例)管电压120 kV、管电流120 mA,碘海醇370 mg I/mL及滤波反投影(FBP)重建技术。分析各组图像肾主动脉干CT值、噪声(SD)、信噪比(SNR)和噪声比(CNR),受检者接受CT有效剂量(ED)、容积CT剂量指数(CTDI vol)、剂量长度乘积(DLP)、碘摄入量以及重建图像评分差异和诊断效能。结果显示,A、B、C组重建图像评分优于D组,肾动脉主干CT值、SD、SNR、CNR均高于D组,B、C组肾动脉主干CT值、SD略低于A组。A、B、C组CTDI vol、DLP、ED均低于D组,B组CTDI vol、DLP、ED高于A组。A、B、C、D组诊断肾主动脉狭窄准确率分别为92.68%、86.49%、84.62%、82.86%。证实IDose 4迭代重建技术能降低受试者受辐射和造影剂剂量,提高成像质量,在低剂量CT肾动脉血管造影中具有较高可行性和实用性。     

An asymmetric N-rim partially substituted calix[4]pyrrole: Its affinity for Ag(I) and its destruction by Hg(II)

A new partially substituted calix[4] pyrrole derivative obtained by the introduction of three thioamide functionalities in the N-rim has been synthesised and fully characterised by ¹H, ¹³C, HSQC, ROESY NMR and mass spectroscopy. Computer modelling suggested an alternate conformation which was confirmed through ROESY ¹H NMR. The receptor interacts only with the silver cation as shown by ¹H NMR. The strength of interaction is quantitatively assessed by titration calorimetry. N-rim modification eliminates the possibility of interaction with anions. Unlike calix[4] pyrrole derivatives obtained by the introduction of functionalities through the meso-position, addition of Hg(NO₃)₂ leads to the degeneration of the receptor as demonstrated by ¹H NMR, FTIR and XPS analyses. This is for the first time reported. Molecular simulation studies show significant strain in the mercury bound ligand in bonds, angles, torsions leading to the destruction of the receptor. Given the negative environmental impact produced by the availability of silver ions in aquatic organisms, the fundamental studies indicate that this receptor offers potential applications for monitoring silver (ion selective electrode) or indeed as a decontaminating material for removing silver ions from water.     

碳自掺杂g-C3N4光催化性能的原位光微量热-荧光光谱研究

通过在尿素前驱体中添加单宁酸, 原位缩聚形成碳自掺杂石墨相氮化碳(g-C₃N₄). 利用X射线光电子能谱(XPS)、 场发射扫描电子显微镜(FESEM)、 X射线衍射(XRD)仪和同步热分析(TG-DSC)等方法对碳自掺杂 g-C₃N₄的形貌、 物相结构和能带价态组分进行表征分析, 结合紫外-可见吸收光谱(UV-Vis)和原位光微量热-荧光光谱联用仪获得碳自掺杂g-C₃N₄降解罗丹明B的原位热/动力学信息和三维荧光光谱信息, 探讨了光催化降解罗丹明B的微观机制. 结果表明, 单宁酸浓度≤10 mg/mL时, 碳会取代七嗪单元结构的氮原子形成g-C₃N₄骨架碳自掺杂; 单宁酸浓度≥ 20 mg/mL时, 碳以无定形形式沉积负载在g-C₃N₄表面上形成无定形碳自掺杂. 骨架碳自掺杂g-C₃N₄形成的π电子有效缩短了禁带宽度, 减小了光生电子-空穴复合几率, 比无定形C掺杂g-C₃N₄显示出更优异的光催化性能, 催化主要活性物种为h⁺和·O{}_{\mathrm{2}}^{-}. 碳自掺杂g-C₃N₄光催化降解过程可分为光响应吸热、 降解污染物放热平衡过程和稳定放热3个过程. 其中骨架碳自掺杂g-C₃N₄(C/N摩尔比为0.844)在光照1000 s内, 三维荧光光谱检测的RhB降解率锐减, 光照1000 s后, 其RhB降解率为87.6%, 分别是原始g-C₃N₄和无定形碳自掺杂g-C₃N₄的3.13倍和1.95倍. 光照1000 s后, 光微量热计显示以矿化和降解非荧光发色中间产物为主, 并保持以热变速率为(0.9799±0.5356) μJ/s稳定放热, 为拟零级反应过程, 是光催化反应的决速步骤.     

Preparation and characterization of nano-Co-[4-chlorophenyl-salicylaldimine-methyl pyranopyrazole]Cl2 as a new Schiff base complex and catalyst for the solvent-free synthesis of 1-amidoalkyl-2-naphthols

By the reaction of 4-chlorobenzaldehyde with ethyl acetoacetate, malononitrile, and hydrazine hydrate, 6-amino-4-(4-chlorophenyl)-3-methyl-2,4-dihydropyrano[2,3-c]pyrazole-5-carbonitrile was prepared and then reacted with salicylaldehyde and CoCl₂·6H₂O to produce nano-Co-[4-cholorophenyl-salicylaldimine-methylpyranopyrazole]Cl₂ (nano-[Co-4CSMP]Cl₂). The prepared nano-Schiff base complex was reported for the first time and fully characterized by Fourier transform-infrared spectroscopy, thermal gravimetric analysis, differential thermal gravimetric analysis, scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and Brunner–Emmett–Teller analyses and applied as an efficient catalyst for the synthesis of some 1-amidoalkyl-2-naphthol derivatives.     

Trisaminomethane–cobalt complex supported on Fe3O4 magnetic nanoparticles as an efficient recoverable nanocatalyst for oxidation of sulfides and C–S coupling reactions

In this work, trisaminomethane–cobalt complex immobilized onto the surface of Fe₃O₄ magnetic nanoparticles was successfully prepared via a simple and inexpensive procedure. The prepared nanocatalyst was considered a robust and clean nanoreactor catalyst for the oxidation and synthesis of sulfides under green conditions. This ecofriendly heterogeneous catalyst was characterized by Fourier transform infrared spectroscopy, X-ray diffractometry, energy-dispersive X-ray spectroscopy, inductively coupled plasma-atomic emission spectroscopy, thermogravimetric analysis, vibrating sample magnetometry, X-ray mapping, scanning electron microscopy, and transmission electron microscopy techniques. Use of green medium, easy separation and workup, excellent reusability of the nanocatalyst, and short reaction time are some outstanding advantages of this method.     

Magnetic retrievable Ag/AgBr/ZnFe2O4 photocatalyst for efficient removal of organic pollutant under visible light

In the present work, a visible-light-driven Ag/AgBr/ZnFe₂O₄ photocatalyst has been successfully synthesized via a deposition–precipitation and photoreduction method. The crystal structure, chemical composition, morphology and optical properties of the as-prepared nanocomposites were characterized by X-ray diffraction spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscope, UV–vis diffuse reflectance spectroscopy and photoluminescence. The photocatalytic activities of the Ag/AgBr/ZnFe₂O₄ nanocomposites were evaluated through the photodegradation of gaseous toluene and methyl orange (MO) under visible light. The results revealed that the as-prepared Ag/AgBr/ZnFe₂O₄ nanocomposite exhibited excellent photocatalytic activity. The degrading efficiency of MO could still reach 90% after four cycles, and the Ag/AgBr/ZnFe₂O₄ nanocomposite could be recycled easily by a magnet. Additionally, the enhanced photocatalytic mechanism was discussed according to the trapping experiments, which indicated that the photo-generated holes (h⁺) and •O₂⁻ played important roles in photodegradation process. At last, a possible photocatalytic oxidation pathways of toluene was proposed based on the results of GC–MS. The Ag/AgBr/ZnFe₂O₄ composites showed potential application for efficient removal of organic pollutant.