双面加热环形通道内干涸点的确定

根据环形管通道内流体流动和换热的特点,以Kirillov和Smogalev提出的干涸点理论模型假设为基础,从最基本的质量守恒方程出发,并引入临界液膜厚度等相应的辅助模型,得到了双面加热环形通道内流动沸腾干涸点的理论模型。同时针对间隙为1.0mm和1.5mm的环形窄缝进行了低压低质量流速工况下干涸点的实验研究。比较发现理论模型预测值与实验结果基本相符。说明本文提出的理论模型适用于低压低流量条件下的窄环形通道。实验同时发现:环状流临界热流密度在系统压力为2.2MPa达到最大值,临界含汽量随质量流速的增大呈缓慢下降趋势。     

The Analysis and Improving of the Microwave Exciter in the Lower Hybrid Wave System

When we carry out lower hybrid wave heating and current driving plasma experiment at tokamak, we need mega-watt order of microwave power. The microwave signal at frequency of 2450 MHz is generated by a microwave exciter. According to the experiment＇s demands, the microwave exciter must provide output power of 1.5～ 2. 5 W with stabilized frequency and amplitude tobe used as the klystron input. Being amplified by the klystron, the microwave signal is transmitted through the transmitting system to the antenna and is emitted into the HL-2A tokamak. So we can see that the microwave exciter＇s function is very important to the lower hybrid wave heating and current driving plasma experiment.     

薄铝埋点等离子体K线光谱半定量诊断

高温等离子体系统中存在等离子体流体力学运动演化过程、离子的离化分布演化动力学过程、高剥离态离子谱发射过程及发射芬光辐射输运过程等，而且高温等离子体系统通常是非平衡系统，所以定量研究高温等离子体系统的发射X光谱和高温等离子体对X光的吸收是一个非常复杂的问题。为了模拟和解释实验测得的激光等离子体发射光谱，提出了一种薄埋点靶：直径为φ200μm厚度为0．1μm的铝点埋在20μm厚的CH膜底衬中，表面再覆盖0．1μm厚CH膜。     

Development of Vacuum Monitoring System in the HL-2A tokamak

HL-2A is the first divertor tokamak in China. The vacuum system is one of the important parts of the HL-2A tokamak, which has to be work well during the physics campaign in 2004. As the tokamak machine is separated from the operation staff during discharges, to guarantee the safe and reliable operation of the vacuum system, it is necessary to watch the vacuum system outside the machine hall with an automatic monitoring system. The paper describes the design and manufacture of the monitoring system.     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.     

双脉冲电子束源实验

2MeV直线感应加速器注入器系统由电子束产生器和脉冲功率系统组成。电子束产生器包括由感应腔组成的阴极电压叠加器、阳极电压叠加器和真空二极管及束输运系统。脉冲功率系统则包含初级功率源Marx、次级功率源Blumlein线和触发系统，其作用是为感应腔提供一个具有数十纳秒平顶宽度的高压脉冲，激发感应腔在感应腔间隙上获得一个加速电场。在2MeV注入器功率系统中，4个Blumlein线的充气开关是由发散装置的输出触发信号进行导通控制的。通过控制发散输出触发信号到达Blumlein线开关的时间，即可以实现Blumlein线开关在不同时间内触发导通，使Blumlein线依据所设定的时间顺序输出激励脉冲，从而在真空二极管上获得高压脉冲串。由于功率系统采用的是182C结构，即一根Blumlein线驱动两个感应腔，因此最多可以实现四脉冲串列。     

基于面阵探测器6／9MeV新型高能工业CT系统

研制成功的6MeV高能工业CT集成检测系统采用磁控管驱动的6MeV射频加速器作为X射线源，成像系统与9MeV高能工业CT相同，扫描方式采用三维锥束扫描。主要技术指标与9MeV工业CT系统接近，其空间分辨率也达到21p／mm（10％的调制度下）。     

镅污染手套箱系统的去污技术

考虑到手套箱系统的主要污染核素为^239Pu，^241Am，^3H和U，其中^239Pu，^241Am属α长寿命极毒核素，很容易产生放射性气溶胶。在手套箱系统退役过程中，手套箱系统的拆除解体前后均应采用行之有效的方法进行去污，最大限度的减少放射性物质对环境的污染。文中根据可剥离膜去污技术、电解去污技术、导电高分子聚合物导电机理以及超声波去污技术，针对镅污染手套箱拆下部件的污染情况和材质特点，采取单独使用和组合使用的方法进行相应的去污技术研究。     

Vacuum System for HL-2A Tokamak

The vacuum system of today＇s tokamak devices is designed to meet the operational requirements of the experiments. The operation can be divided into five modes, （1） pumping down and leak detecting of the vacuum vessel, （2） baking, （3） plasma-facing component （PFC） conditioning, （4）evacuating and controlling of the particles at plasma edge, （5） plasma discharge experiments.