The action modes of Lippia sidoides (Cham) essential oil as penetration enhancers on snake skin

The aim of this work was to study the effect of Lippia sidoides essential oil (LSEO) on stratum corneum lipids and the permeation of salicylic acid. DSC and FTIR spectroscopy were applied. LSEO 1% (v/v) significantly enhanced salicylic acid flux through snake skin. According to the DSC curves changes in the transition temperature of the lipids were observed indicating that LSEO can interact with stratum corneum. The IR spectrum of skin treated with LSEO showed a decrease in the peak intensity for CH₂ stretchings (2920–2850 cm^–1) however the peak positions did not alter suggesting the extraction of the lipids.     

Combined use of medium mass resolution and desolvation introduction system for accurate plutonium determination in the femtogram range by inductively coupled plasma-sector-field mass spectrometry

Formation of a polyatomic species made of an atom of a heavy element like lead, mercury or iridium, and atoms abundant in plasma (argon, nitrogen, oxygen, and hydrogen) when using an inductively coupled plasma-sector-field mass spectrometer (ICP-SFMS) may lead to false detection of femtograms (fg) of plutonium or bias in the measured concentrations. Mathematical corrections, based on the measurement of heavy element concentrations in the sample solutions and determination of the extents of formation of the polyatomic interferences, are efficient but time-consuming and degrade detection limits. We describe and discuss a new method based on the combination of, on the one hand, medium mass resolution (MR) of the ICP-SFMS to separate plutonium isotopes physically from interfering polyatomic species, and, on the other, use of a desolvation introduction system (DIS) to enhance sensitivity, thus partly compensating for the loss of transmission due to use of a higher resolution. Plutonium peaks are perfectly separated from the major interfering species (PbO₂, HgAr, and IrO₃) with a mass resolution of ~ 4000. The resulting nine-fold transmission loss is partly compensated by a five-fold increase in sensitivity obtained with the DIS and a lower background. The instrumental detection limits for plutonium isotopes, calculated for measurements of pure synthetic solutions, of the new method (known as MR-DIS method) and of the one currently used in the laboratory (LR method), based on a low mass resolution equal to 360, a microconcentric nebulizer and two in-line cooled spray chambers, are roughly equivalent, at around 0.2 fg ml^? 1. Regarding the measurement of real-life samples, the results obtained with both methods agree and the corresponding analytical detection limits for plutonium isotopes ²³⁹Pu, ²⁴⁰Pu and ²⁴¹Pu are of a few fg·ml^? 1 of sample solution, slightly lower with the MR-DIS method than with the current LR method. Although less sensitive than other plutonium ICP-MS measurement methods described in the literature, the main advantage of the MR-DIS method is that it is robust against the risk of false plutonium detection, even in the case of relatively high concentrations of heavy elements like lead, mercury or iridium.     

New Tris(hydroxypyridinones) as Iron and Aluminium Sequestering Agents: Synthesis,Complexation and In Vivo Studies

Two new tripodal tris(3‐hydroxy‐4‐pyridinone) hexadentate chelators—NTA(BuHP)₃ and NTP(PrHP)₃ (NTA=nitrilotriacetic acid, NTP=nitrilotripropionic acid, HP=hydroxypyridone)—have been developed and studied in solution for their iron and aluminium binding affinity, and also assayed in vivo for their capacity to remove metal from an animal model that is overloaded. These chelators are positional isomers, possessing identical general structures based on aminotricarboxylic acid skeletons attached to three bidentate 3‐hydroxy‐4‐pyridinones (3,4‐HPs), but differing in the position of the amide linkage along the chelating “arm”. In spite of expected differences in the tripodal ligands, such as acidity and hydrogen‐bonding networks, they share important properties, namely, a mild hydrophilic character (log P ca. ?1.2 to ?1.4) and a strong chelating affinity for Fe and Al (pFe=27.9 and pAl=22.0 for NTA(BuHP)₃; pFe=29.4 and pAl=22.4 for NTP(PrHP)₃). They also evidenced identical effects on the biodistribution and on the excretion of a radiotracer (⁶⁷Ga) previously administered to mice, as models of iron overload animals. Comparison of the new compounds with reported analogues shows good improvement in terms of solution and in vivo sequestering properties, thus giving support to expectations about their potential clinical application as metal removal agents.     

Synthesis and properties of new fluorinated polymers bearing pendant imidazole groups for fuel cell membranes operating over a broad relative humidity range

New alternating copolymers comprising a chlorotrifluorinated backbone and imidazole‐terminated pendant ethylene oxide groups have been prepared with a view to their use as a component of proton‐conducting membranes in polymer electrolyte fuel cells. A vinyl ether containing an imidazole (Imi) function protected by a benzyl group (BVI) was first synthesized in a three‐step reaction. It was then copolymerized in solution with chlorotrifluoroethylene (CTFE) by conventional radical copolymerization leading to alternating poly(BVI‐alt‐CTFE) copolymers in good yields. Deprotection of the benzyl group under hydrogen produced a chlorotrifluorinated poly(Imi‐alt‐CTFE) copolymer. The polymer was subsequently used to form blend membranes with sulfonated poly(ether ether ketone) (sPEEK). The conductivity of blend membranes of poly (Imi‐alt‐CTFE) with sPEEK lies in the range of 4–10 mS cm^?1 at 40–70 °C and, for blend membranes rich in poly(Imi‐alt‐CTFE), is little dependent on relative humidity between 30 and 100%. It is surmised that the polymer and membrane composition favor microstructural phase separation into chlorotrifluorinated polymer backbone domains and regions in which imidazole groups are clustered. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 223–231, 2010     

Radical Localization in a Series of Symmetric NiII Complexes with Oxidized Salen Ligands

Square‐planar nickel(II) complexes of salen ligands, N,N′‐bis(3‐tert‐butyl‐(5R)‐salicylidene)‐1,2‐cyclohexanediamine), in which R=tert‐butyl ( 1 ), OMe ( 2 ), and NMe₂ ( 3 ), were prepared and the electronic structure of the one‐electron‐oxidized species [ 1 – 3 ]^+. was investigated in solution. Cyclic voltammograms of [ 1 – 3 ] showed two quasi‐reversible redox waves that were assigned to the oxidation of the phenolate moieties to phenoxyl radicals. From the difference between the first and second redox potentials, the trend of electronic delocalization 1 ^+.> 2 ^+.> 3 ^+. was obtained. The cations [ 1 – 3 ]^+. exhibited isotropic g tensors of 2.045, 2.023, and 2.005, respectively, reflecting a lower metal character of the singly occupied molecular orbital (SOMO) for systems that involve strongly electron‐donating substituents. Pulsed‐EPR spectroscopy showed a single population of equivalent imino nitrogen atoms for 1 ^+., whereas two distinct populations were observed for 2 ^+.. The resonance Raman spectra of 2 ^+. and 3 ^+. displayed the ν_8a band of the phenoxyl radicals at 1612 cm^?1, as well as the ν_8a bands of the phenolates. In contrast, the Raman spectrum of 1 ^+. exhibited the ν_8a band at 1602 cm^?1, without any evidence of the phenolate peak. Previous work showed an intense near‐infrared (NIR) electronic transition for 1 ^+. (Δν_1/2=660 cm^?1, ε=21 700 M ^?1 cm^?1), indicating that the electron hole is fully delocalized over the ligand. The broader and moderately intense NIR transition of 2 ^+. (Δν_1/2=1250 cm^?1, ε=12 800 M ^?1 cm^?1) suggests a certain degree of ligand‐radical localization, whereas the very broad NIR transition of 3 ^+. (Δν_1/2=8630 cm^?1, ε=2550 M ^?1 cm^?1) indicates significant localization of the ligand radical on a single ring. Therefore, 1 ^+. is a Class III mixed‐valence complex, 2 ^+. is Class II/III borderline complex, and 3 ^+. is a Class II complex according to the Robin–Day classification method. By employing the Coulomb‐attenuated method (CAM‐B3LYP) we were able to predict the electron‐hole localization and NIR transitions in the series, and show that the energy match between the redox‐active ligand and the metal d orbitals is crucial for delocalization of the radical SOMO.     

Extraction of volatile oil from aromatic plants with supercritical carbon dioxide: experiments and modeling

An overview of the studies carried out in our laboratories on supercritical fluid extraction (SFE) of volatile oils from seven aromatic plants: pennyroyal (Mentha pulegium L.), fennel seeds (Foeniculum vulgare Mill.), coriander (Coriandrum sativum L.), savory (Satureja fruticosa Béguinot), winter savory (Satureja montana L.), cotton lavender (Santolina chamaecyparisus) and thyme (Thymus vulgaris), is presented. A flow apparatus with a 1 L extractor and two 0.27 L separators was built to perform studies at temperatures ranging from 298 to 353 K and pressures up to 30.0 MPa. The best compromise between yield and composition compared with hydrodistillation (HD) was achieved selecting the optimum experimental conditions of extraction and fractionation. The major differences between HD and SFE oils is the presence of a small percentage of cuticular waxes and the relative amount of thymoquinone, an oxygenated monoterpene with important biological properties, which is present in the oils from thyme and winter savory. On the other hand, the modeling of our data on supercritical extraction of volatile oil from pennyroyal is discussed using Sovová's models. These models have been applied successfully to the other volatile oil extractions. Furthermore, other experimental studies involving supercritical CO₂ carried out in our laboratories are also mentioned.