Mixing mechanisms of vortex ring formed by gravity slumping motion

 This paper is concerned with an experimental investigation of the mixing inside the vortex ring formed by the gravity slumping motion of a dense cloud in a less dense atmosphere. The dynamics of the spreading and instantaneous structures of the turbulent flow were examined by visualization, single and multi-point measurements of velocity and concentration for two heavy gases, carbondioxide (CO₂) and dichlorodifluoromethane (CCl₂F₂), in a configuration in that heavy gas, initially trapped in a reservoir, was released with the rise of a shutter into calm air of a sector-shaped dispersion channel. Visualization of the cloud as a whole showed a spreading motion in which an advancing frontal structure was followed by a stratified flow with a layer of dense fluid of higher velocities near the wall and, on top of it, a layer of dilute fluid whose concentration is controlled by the mixing mechanisms within the head. During the course of spreading, there was always a phase in which the head attained to a constant speed of advance, which occurred as 0.13 m/s for CO₂ and 0.48 m/s for CCl₂F₂. It was interesting to observe for CO₂ that the phase of constant speed took place in between two acceleration phases; the former was due to the initial slumping of the cloud at the exit of the reservoir, and the latter was attributed to the collapse of the head on the transition to the passive dispersion phase. Instantaneous two-dimensional velocity field, measured with particle image velocimeter (PIV), showed that the cloud overran the ambient air which caused the approaching dense fluid deflected away from the wall with significant vertical velocities and downstream-moving separation, and the air trapped under the head resulted in the density inversion which introduced further intricacy to the turbulent structure of the head. Instabilities at the upper free shear layer due to density and velocity discontinuity rolled into periodic array of vortices which engulfed a considerable amount of air as they were convected backwards over the head, but the incorporation of heavy and light fluids was completed with the appearance of microscales after the collapse on the stratified layer. Analyses of the cloud head at different downstream locations also revealed that its size remained unchanged when the speed of advance was constant, allowing the rate of change of the cloud volume being modeled with the rate of spreading. Contours of concentration obtained from digitized PIV pictures confirmed the kinematic features of the mixing revealed by the velocity field and that the concentration values within the large structures were higher than those at the upper part of the stratified layer. Motivated by the experimental observations, a semi-empirical analysis was presented to describe the results and based on local values of the Richardson and Reynolds numbers. Received: 4 October 1995 / Accepted: 4 July 1996     

Solubility of carbon dioxide in aqueous solutions of sodium chloride: Experimental results and correlation

The solubility of carbon dioxide in aqueous solutions of sodium chloride was measured in the temperature range from 40 to 160°C, up to 6 mol-kg salt solutions and total pressures up to 10 MPa. Pitzer's⁽¹⁾ equations as well as the Chen and Evans⁽²⁾ model were used to correlate the new data. Results are reported and compared to literature data and correlations.     

Fracture strength of class II slot cavities restored with polymerizable restorative materials

This study compared the fracture strength of Class II slot cavities restored with polymerizable restorative materials. Sixty, caries-free, posterior teeth were divided into five groups of 12 teeth. The Class II slot cavities were prepared. The teeth were restored with two packable composites (Filtek P60, Surefil), a microhybrid composite (Filtek Z250)and two ormocer (Definite, Admira). The restorations were then subjected to fracture resistance tests. The marginal ridges of the restorations were loaded at an angle of 13.5° to the long axis of the tooth in an Universal Testing Machine until failure. Analysis of mean forces indicated that, Filtek P60, Surefil and Filtek Z250 exhibited better performance than Definite and Admira. The tested resin composites differed in their mechanical properties. This study suggested that fracture behavior were highly influenced by the filler system. Overall, Filtek P60, Surefil, Filtek Z250, demonstrated good fracture resistance. Copyright © 2003 John Wiley & Sons, Ltd.     

Preliminary analyses of natural radionuclides in selected Turkish power plant lignites

This preliminary study presents the experimental results concerning the concentrations of selected radionuclides (²³⁸U, ²³²K, ²²⁶Ra, ²³²Th) in Af?in-Elbistan, Çan, Çay?rhan, Erzurum, Göynük, Kangal, Orhaneli, Saray, Seyitömer, Soma, Tunçbilek, Yata?an and Yeniköy lignites, which are primarily utilized as fuel for thermal power plants in Turkey. Gamma-spectrometry of 39 representative lignite samples gave results with the following concentration ranges: 8 to 296 Bq/kg for ²³⁸U, 3 to 79 Bq/kg for ²³²Th, 17 to 360 Bq/kg for 40K, and 5 to 130 Bq/kg for ²²⁶Ra. The ²³⁸U results reported here are higher than other literature values for various world coals, earth's crust and world average.     

Synthese und Geruch von (Z)-Dehydro-homo-β-santalol

Summary Guided by molecular modeling studies, the synthesis of the title compound is described. The organoleptic evaluation proved the predicted real sandal like odour of (Z)-dehydro-homo--santalol.

Aus den Diplomarbeiten von C.P. (1991), I.P. und B.Ö. (1992), Universität Wien     

Recoil spectrometry: Ion accelerator based elemental characterisation of surface layers

Recoil Spectrometry covers a group of techniques that are very similar to the well known Rutherford backscattering Spectrometry technique, but with the important difference that one measures the recoiling target atom rather than the projectile ion. This makes it possible to determine both the identity of the recoil and its depth of origin from its energy and velocity, using a suitable detector system. The incident ion is typically high-energy (30–100MeV)³⁵C1,⁸¹Br or¹²⁷I. Low concentrations of light elements such as C, O and N can be profiled in a heavy matrix such as Fe or GaAs. Here we present an overview of mass and energy dispersive recoil Spectrometry and illustrate its successful use in some typical applications.     

New glyoxime derivatives and their transition metal complexes

Two new vic-dioxime ligands and their complexes with Co⁺², Ni⁺², Cu⁺², Cd⁺², and Zn⁺² ions were synthesized. Primer amines (3,4-methylenedioxaaniline and 4-methylbenzylamine) reacted with antichloroglyoxime to give 3,4-methylenedioxaphenylaminoglyoxime (H₂L¹) and N-(4-methylbenzyl)aminoglyoxime (H₂L²) ligands. Structures of the ligands and their complexes are proposed based on elemental analyses, IR, UV-Vis, and ¹H NMR spectra, magnetic susceptibility measurements, and thermogravimetric analyses (TGA). The article was submitted by the authors in English.     

Competitive adsorption and desorption of a bi-solute mixture: effect of activated carbon type

This study aims to clarify the effects of carbon activation type and physical form on the extent of adsorption capacity and desorption capacity of a bi-solute mixture of phenol and 2-chlorophenol (2-CP). For this purpose, two different PACs; thermally activated Norit SA4 and chemically activated Norit CA1, and their granular countertypes with similar physical characteristics, thermally activated Norit PKDA and chemically activated Norit CAgran, were used. The thermally activated carbons were better adsorbers for phenol and 2-CP compared with chemically activated carbons, but adsorption was more reversible in the latter case. 2-CP was adsorbed preferentially by each type of activated carbon, but adsorption of phenol was strongly suppressed in the presence of 2-CP. The simplified ideal adsorbed solution (SIAS) model underestimated the 2-CP loadings and overestimated the phenol loadings. However, the improved and modified forms of the SIAS model could better predict the competitive adsorption. The type of carbon activation was decisive in the application of these models. For each activated carbon type, phenol was desorbed more readily in the bi-solute case, but desorption of 2-CP was less compared with single-solute. This was attributed to higher energies of 2-CP adsorption.     

Radionuclides in a sediment trap and bottom sediment samples from the eastern Turkish coast of the Black Sea

Summary Radionuclide (¹³⁷Cs, ²³⁸U, ²³²Th and ⁴⁰K) concentrations were determined in a sediment trap and bottom sediment samples collected from a station at the eastern Turkish coast of the Black Sea. The specific activity of the ¹³⁷Cs radionuclide in the settling particles ranged from 0.04±0.01 to 0.10±0.02 Bq^. g^-1dry weight. The calculated flux rate of the ¹³⁷Cs was between 0.37 and 2.59 Bq^. m^-2. d^-1in the sampling periods of 2002 and 2003. The ¹³⁷Cs concentration in the bottom sediment profile were between 0.039±0.013-9.083±0.017 Bq^. g^-1dry weight in the same station. The vertical profile of the radionuclides suggests that they have little mobility during the 17 years after the Chernobyl accident.     

Determination of the stability constants of uranyl complex with 8-hydroxyquinolinium sulfate

8-Hydroxyquinoline (8-HOQ) is known as an important chelating agent for several metal ions. This compound is practically insoluble in water. For this reason, in this study its water soluble sulfate salt has been used for complexing uranyl ions and the stability constants of the complex have been determined. The Irving-Rosotti method computing the Calvin-Bjerrum pH-titration data, was applied. Finally, the stability constants of the complex formed between (8-HOQN-H)₂SO₄ and uranyl ions were found to be lgK₁=8.25 and lgK₂=4.15, the overall stability constant being {ie55-1}.